PTFE Mechanical Shaft Seals WB2/10T
PTFE Mechanical Shaft Seals WB2/10T
1. PTFE bellows mechanical shaft seals;
2. Equivalent to JC 10T types.
PTFE Mechanical Shaft Seals WB2/10T
PTFE bellows mechanical shaft seals are suitable for corrosive and aggressive media, which are outside mounted with no metal parts in contact with the medium. Stationary seat is Clamp or L-Shape.
1. Common Combined Materials:
Stationary ring: SiC or Ceramic
Rotary ring: Sic or PTFE/Fiberglas(Carbon-graphite)
Secondary seal: PTFE
Others: SS304 or SS316
2. Operating conditions:
Temperature: ≤120°C
Pressure: ≤0.5MPa
Speed: ≤10m/s
Other supplier products
|
|
Graphite Bearing |
Wear-resisting graphite bearing,
High-Temperature Resistant graphite bearing,
Metal impregnated graphite bearing.
graphi... |
|
|
Ceramic seal face |
1. ceramic seal face
2. Content of Al2O3: 95%, 99%,99.5% etc
3. resistan high temperature, corrosion, wearing, etc.
Cera... |
|
|
Textile Mechanical Seal 250 |
Textile Mechanical Seal most types and sizes are available off stock.
Special designs can be manufactured upon request.
... |
|
|
Carbon seals for steam rotary joints. |
Carbon seals for steam rotary joints.
Apply medium: Water, steam, superheated water.
HX25(Specs 25mm) rotary joint seal end and rotary joint bear... |
|
|
Tank Seal Ring BCS |
Tank Seal Ring BCS
1. Top seal face and Bottom stationary seat in 2.5, 3.5 &4.5 inch shaft.
2. SIC/Car or SSIC/ Antimony Car
Tank seal ring ... |
供应产品
Same products
