High quality new design thrust bearing for steam turbine
Thrust bearings are used for fixing the drive shaft and carrying the axial force from the drive shaft (ie, the force direction and axial direction) with thrust. Working in the sliding friction and the liquid lubrication conditions, the sliding surface is separated by lubricating oil without direct contact, but it also can greatly reduce the friction loss and surface wear, so thrust bearings have long life.
Thrust bearings provided by Runh could operate smoothly with reliability and no noise.
在线联系供应商
Other supplier products
| High quality power plant used belt type conveyor | Belt type conveyor is used for transportation of coal and slag. Belt conveyor is widely used in the coal conveying system and slag removing system ... | |
| Professional garbage fired power plant EPC contractor | Garbage power generation depends on the garbage waste mainly including garbage fired (gasification) power generation, garbage burying gas power gen... | |
| High quality new design thrust bearing for steam turbine | Thrust bearings are used for fixing the drive shaft and carrying the axial force from the drive shaft (ie, the force direction and axial direction)... | |
| China made high quality deaerator with low price | Deaerator is one of the key equipment of the boiler and heat supplying system. If the deoxidization ability of deaeartor is poor, it will cause ser... | |
| China made high quality CFB Boiler | CFB boiler is one type of the power plant boiler, fuel will mix with ash content in certain proportions to combust in fluidized status. The outlet ... |
Same products
| Disposable Blunt Needle With Side Hole (CANNULA) | 卖方: 866413 | The Disposable Blunt Needle With Side Hole (CANNULA) from Zhejiang INI Medical Devices Co., Ltd. ... | |
| Cannula For Hypodermic Needle | 卖方: 866413 | Zhejiang INI Medical Devices Co., Ltd. offers Cannula For Hypodermic Needle, designed for use in ... | |
| 多级串联精密滚柱轴承T-3092-6A有货 | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号:T-3092-6A项目代码:T-3092-6A结构:基本型串联推力圆柱滚子轴承原产地:中国洛阳润滑:油润滑外形公制尺寸:30*92*294mm它们在橡胶和塑料行业的平行双螺杆挤出机... | |
| 食品螺杆挤出机多级串联推力轴承T-2872-6A | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号:T-2872-6A项目代码:T-2872-6A原产地:中国洛阳润滑:油润滑外形公制尺寸:29*75*165mm外径D:75mm内径d:29mm总高度:165毫米它们在橡胶和塑料行业... | |
| 薄膜螺杆挤出机齿轮箱串联滚柱轴承T-25105 8A | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号:T-25105 8A项目代码:T-25105.8A原产地:中国洛阳润滑:油润滑外形尺寸:25*105*255mm外径D:105mm内径d:25mm总高度:395mm它们在橡胶和塑料... |












