Eddy Current Testing Equipment
Technical Characteristics of MFL101 mfl floor scanner
Unique full modular structure, from the main body of the computer mechanism the handle of MFL101 Tank Floor MFL Scanner can be quickly folded, disassembled. It is easy to transport and access manholes. With humanized operation design, the height of armrest and adjustable angle, suitable for different operators. Precise signal conditioning circuit. The four-layer PCB with mixed power excellent performance. data word signal processing system, supercomputing power, advanced evaluation algorithm.
High-performance touch industrial tablet. The operation is very convenient does not require a keyboard and mouse. Unique probe design. It can pick up the magnetic flux leakage signal to overcome the unwanted signal caused by the eddy current effect. The number of physical channels is up to 32. High-performance lithium battery pack, which is at least 50% lighter than the equivalent capacity lead-acid battery Software design that can be operated efficiently.
All scan parameter settings graphical, intuitive, and easy to use, dramatically increasing the speed of operation and avoiding errors. The magnetization is quickly adjustable. By adjusting the ground clearance the magnetic pole, the magnetization of the detection target plate can be quickly changed to meet the requirements of detecting the thickness and minimize the gravity of the instrument and the bottom plate. This design allows the instrument to adapt to a wide range of floor thicknesses and reduce operator effort, increasing battery life.
Different degrees of corrosion are represented by non-color blocks. Online analysis of corrosion degree and position, position coordinates can be displayed in a table or on a scan.
MFL101 Tank Floor mfl Tank Floor InspectionPerformance Parameters Host:
Industrial tablet computer interface:
Chinese Working principle: Magnetic flux leakage method:
NdFeB permanent magnet Channel number: 32
Scan width: 260mm
Drive mode: DC brushless motor, worm gear reducer, The motor can be raised.
Convert manual and electric drives at any time.
Detection speed: 0 m / s~0.7m /s step-less adjustable
Detection thickness: 8-20mm Penetration coating: non-magnetic
Penetration thickness: <4mm
Sensitivity: can be set (8-12mm thick 20 % material loss of the bottom plate, 40% material loss of the 12-20mm thick bottom plate
Data storage: local hard disk storage, USB disk dumping
Real-time analysis: Yes
Offline software
Battery specification: 14V40AH
Nanjing BOKENA Automation System Co., Ltd., originated from the eddy current testing laboratory of the Nanjing University of Technology. It isone of the most professional ndt testing equipment suppliersin China. We sincerely invite and welcome people from all around the world to invest and create more values together.
在线联系供应商
Other supplier products
 |
Bearing Ring Crack and Hardness Combination Flaw Detector TQJC-02 | The technology of BKN originated from eddy current Laboratory of Institute of Materials, Nanjing University of Technology. At present, it is a lead... |
 |
Wireless Transmission Pipe Ultrasonic Flaw Detector | The ultrasonic pipe testing equipmentsystem is suitable for the automatic detection of various internal and external defects of steel pipes. The pr... |
 |
BKNET-0102 Welded Pipe Eddy Current Flaw Detector | The technology of BKN originated from eddy current Laboratory of Institute of Materials, Nanjing University of Technology. At present, it is a lead... |
 |
Valve Tappet Eddy Current Flaw Detector QMTZET-04 | Tappet full automatic eddy current testing system is a full automatic crack hardness sorter that integrates light, electricity and machinery. The w... |
 |
QTXET-01 Ball Studs Eddy Current Sorting Machine | There are two main types of ball studs: one is a combination of a spherical pin and an integral ball seat, and the other is a combination of a hemi... |
Same products
 |
Tandem roller bearing M4CT3278 with shaft 78x32x110.5mm | 卖方: JinHang Precision Bearing Co.,LTD | The tandem roller extruder bearing m4ct3278 that use for PVC screw extruder gearbox, the shaft di... |
 |
Tandem roller bearing F-86722 for Rubber extrusion machine | 卖方: JinHang Precision Bearing Co.,LTD | The bearing f-51909 t3ar mainly used in the twin screw plastic extrusion machine gearbox.The bear... |
 |
Tandem roller bearing t6ar3278 for the extruder shaft gearbox | 卖方: JinHang Precision Bearing Co.,LTD | The bearing T6 AR 3278 with size 32X78X163.5mm mainly used for the high speed extruder machine ge... |
 |
Tandem roller bearing MTCT2468 for Screw extrude gearbox | 卖方: JinHang Precision Bearing Co.,LTD | The bearing M5CT2468 for food/feed/plastic/rubber extrusion machine gearbox use. With high perfor... |
 |
twin screw extruder gearbox used t5ar3278 bearing | 卖方: JinHang Precision Bearing Co.,LTD | Bearing T5AR3278 fullsize 32x78x137mm bearing actual picture, Please reference them. Bearing fact... |
