KBA-L Linear Bearing Pillow Block 2019
ISUTAMI KBA-L long linear bearing , also known as KBA-L extended linear bearing unit, KBA-L extended linear slide unit or KBA-L extended linear case housing (unit), is a suitable series for European market. L is an abbreviation for Long. This model consists of a long type aluminum housing with 4 fixing holes as well as two KB standard linear bearings. There is an oil hole on the unit side and one circlip on each end in the proper position. There are also two rubber seals (UU) at both ends of the linear bearing to keep back debris or ball bearing contamination. The aluminum casing is applied because it is small and lightweight, this kind of material has strong corrosion resistance.
KBA-L Linear Bearing Pillow Block Features
The KBA-L linear bearing pillow block housingis a closed, double-length European metric version. The two KB standard linear bearings are mounted in the housing and arranged in a straight line in the aluminum casing. Advantages of the bearing bushing include less tilt or friction, less wear over time, and better machining results.
If you are manufacturing CNC milling machines, milling machines or lathes that require precise linear motion, it is a perfect solution to install this long aluminum bearing housing with KB standard linear bearings. Aluminum housing size range: length (L) ranges 58-230mm (matching KB standard linear bearing length (L) ranges 25-100mm); width (W) ranges 34-122mm; height (F) ranges 22-102mm. The minimum combined size of the specification KBA8L is 58*34*22mm, and the largest combined specification KBA50L is 230*122*102mm. These data are basically the same as the SMA-L extended type linear bearing pillow block, except that the KBA-L series has no diameter of 12mm and 35mm. The aluminum housing has four CNC drilled holes, threaded holes and countersunk holes of the same size M4-M10, which can be easily and safely mounted to almost any linear motion system.
A typical CNC system consists of a linear shaft of matching diameter, ranging from 8 to 60 mm in diameter, mounted on both ends of the shaft by two end supports, and the housing of the extended linear bearing runs straight along the shaft. Most CNC machines and 3D printers have two such components mounted side-by-side, using a housing as a stand to support the mobile platform. This is a long unit able to be mounted from above or below, making it easy to incorporate into the intended system. Positioning and precision enhancements are facilitated with one of the side aspects serving as datum face. The extruded aluminum case has undergone sufficient post-extrusion heat treatment to create a compact, lightweight and precision item.
As a professional bearing manufacturing company in china, ISUTAMI is committed to providing customers with the best possible quality bearing products at the most reasonable price. If you want to know more details or want a quotation, just feel free to contact us!
在线联系供应商
Other supplier products
 |
Agricultural Bearing Hex Bore Series | ISUTAMI hex bore series agricultural bearing is a kind of regular agricultural bearing. Its appearance is similar to that of disc harrow bearings a... |
 |
Round Flange Mounted Units Pressed Steel 2019 | ISUTAMI pressed steel round flange mounted unit, also known as ISUTAMI 3-bolt pressed steel round flange mounted bearing unit, it consists of two m... |
 |
Plastic Mounted Bearing 2019 | ISUTAMI plastic mounted bearing adopts stainless steel bearing and engineering plastic base. Various engineering plastic series of ISUTAMI, such as... |
 |
Long Pilot Pattern Square Flange Linear Bearing LMKP-L 2019 | ISUTAMI LMKP-L long pilot pattern square flange linear bearing, also called LMKP-L long pilot pattern square flange linear ball bearing or LMKP-L l... |
 |
Standard Linear Bearing SW | ISUTAMI SW standard linear bearings, also known as SW standard linear ball bearings or SW standard linear bushing bearings. SW is the imperial seri... |
Same products
 |
多级串联精密滚柱轴承T-3092-6A有货 | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号：T-3092-6A项目代码：T-3092-6A结构：基本型串联推力圆柱滚子轴承原产地：中国洛阳润滑：油润滑外形公制尺寸：30*92*294mm它们在橡胶和塑料行业的平行双螺杆挤出机... |
 |
食品螺杆挤出机多级串联推力轴承T-2872-6A | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号：T-2872-6A项目代码：T-2872-6A原产地：中国洛阳润滑：油润滑外形公制尺寸：29*75*165mm外径D:75mm内径d:29mm总高度：165毫米它们在橡胶和塑料行业... |
 |
薄膜螺杆挤出机齿轮箱串联滚柱轴承T-25105 8A | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号：T-25105 8A项目代码：T-25105.8A原产地：中国洛阳润滑：油润滑外形尺寸：25*105*255mm外径D:105mm内径d:25mm总高度：395mm它们在橡胶和塑料... |
 |
PVC螺杆挤出设备齿轮箱滚柱轴承T-25105 8A | 卖方: JinHang Precision Bearing Co.,LTD | 应用：橡胶和塑料工业中单螺杆和双螺杆挤出机的变速箱。深孔钻削设备摩擦焊机。轴承出厂编号：T-25105 8A项目代码：T-25105.8A原产地：中国洛阳润滑：油润滑外形尺寸：25*105*25... |
 |
食品挤出机多级串联推力轴承T-25105.6A工厂现货 | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号：T-25105.6A项目代码：T-25105.6A原产地：中国洛阳润滑：油润滑外形尺寸：25*105*255mm外径D:105mm内径d:25mm总高度：255毫米轴承轴直径：0.... |
