Round Flange Mounted Units Pressed Steel 2019
ISUTAMI pressed steel round flange mounted unit, also known as ISUTAMI 3-bolt pressed steel round flange mounted bearing unit, it consists of two main components: a stamped steel housing and an insert spherical ball bearing. The housing is with a round flange and is made of low carbon stamped steel strip with zinc plated on the surface, so the housing has an anti-corrosion function. Three square bolt holes are evenly distributed on the circular flange, and the angle between the holes is 120°. These bolt holes are primarily used to secure and mount the entire bearing unit. The spherical bearing built into the steel housing is a rolling ball bearing, which is mainly used to reduce the friction of the transmission equipment during operation. There is a dust-proof rubber ring on each side. In addition, the inner ring of the bearing is generally divided into two types: a set screw locking type and an eccentric locking type, which can fix a circular shaft of a corresponding size. The series is pre-lubricated and one half with grease fitting, one half with grease groove.
Round Flange Mounted Units Pressed Steel Features
ISUTAMI pressed steel flange bearingis lighter than the cast iron round flange housing. The maximum size of 3-bolt pressed steel round flange mounted bearing units does not exceed 2kg, and the pressed steel housing is smaller. However, the series of mounted bearing units can only be used in applications with low loads. At present, ISUTAMI can provide three different types of products: UCPF series unit, SBPF series unit and SAPF series unit. Correspondingly, among the three products, UC200 series ball bearings, SB200 series ball bearings and SA200 series ball bearings are combined with PF series bearing housings to form bearing units. ISUTAMI stamped steel round flange monted bearing unit, because of its easy assembly and disassembly, has a long service life under certain conditions, and it is used in some specific machinery and equipment. At the same time, ISUTAMI can also provide a 4-bolt pressed steel round flange mounted bearing unit, and the 4-bolt product is more stable after installation.
In addition, ISUTAMI can design and manufacture other sizes of 3-bolt or 4-bolt pressed steel round flange mounted units for customers to meet their specific needs.
As one of the most professional pillow block bearing manufacturers in china, ISUTAMI is committed to providing customers with the best possible quality bearing products at the most reasonable price. If you want to know more details or want a quotation, just feel free to contact us!
在线联系供应商
Other supplier products
|
|
Round Flange Mounted Units Pressed Steel 2019 | ISUTAMI pressed steel round flange mounted unit, also known as ISUTAMI 3-bolt pressed steel round flange mounted bearing unit, it consists of two m... |
 |
Long Square Flange Linear Bearing KBK-L 2019 | ISUTAMI KBK-L long square flange linear bearings, also known as KBK-L long square flange linear ball bearings or KBK-L long square flange linear b... |
 |
KBA-AJ Linear Bearing Pillow Block 2019 | ISUTAMI KBA-AJ adjustment linear bearing pillow block, also known as KBA-AJ clearance-adjusting linear bearing unit,linear bearing pillow block eur... |
 |
Agricultural Bearing Hex Bore Series | ISUTAMI hex bore series agricultural bearing is a kind of regular agricultural bearing. Its appearance is similar to that of disc harrow bearings a... |
 |
Plastic Mounted Bearing 2019 | ISUTAMI plastic mounted bearing adopts stainless steel bearing and engineering plastic base. Various engineering plastic series of ISUTAMI, such as... |
Same products
 |
多级串联精密滚柱轴承T-3092-6A有货 | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号：T-3092-6A项目代码：T-3092-6A结构：基本型串联推力圆柱滚子轴承原产地：中国洛阳润滑：油润滑外形公制尺寸：30*92*294mm它们在橡胶和塑料行业的平行双螺杆挤出机... |
 |
食品螺杆挤出机多级串联推力轴承T-2872-6A | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号：T-2872-6A项目代码：T-2872-6A原产地：中国洛阳润滑：油润滑外形公制尺寸：29*75*165mm外径D:75mm内径d:29mm总高度：165毫米它们在橡胶和塑料行业... |
 |
薄膜螺杆挤出机齿轮箱串联滚柱轴承T-25105 8A | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号：T-25105 8A项目代码：T-25105.8A原产地：中国洛阳润滑：油润滑外形尺寸：25*105*255mm外径D:105mm内径d:25mm总高度：395mm它们在橡胶和塑料... |
 |
PVC螺杆挤出设备齿轮箱滚柱轴承T-25105 8A | 卖方: JinHang Precision Bearing Co.,LTD | 应用：橡胶和塑料工业中单螺杆和双螺杆挤出机的变速箱。深孔钻削设备摩擦焊机。轴承出厂编号：T-25105 8A项目代码：T-25105.8A原产地：中国洛阳润滑：油润滑外形尺寸：25*105*25... |
 |
食品挤出机多级串联推力轴承T-25105.6A工厂现货 | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号：T-25105.6A项目代码：T-25105.6A原产地：中国洛阳润滑：油润滑外形尺寸：25*105*255mm外径D:105mm内径d:25mm总高度：255毫米轴承轴直径：0.... |
