.

Mechanical Bearing C35

MAIN CHARACTERISTICS

Low vibration, low noise.
Suitable for bad and complicated environment.
Precision level all over P5

The accuracy of ZXZC deep groove ball bearings (Mechanical Bearing C35) are divided into four grades of tolerances with national standard GB/T307. 1 which compared with the ISO and AFBMA standard.etc is in the following table.

Mechanical Bearing C35 are packed in plastic tubes or polythene bags,and then in carton boxes industrial packing is also available. Special requirements should be mentioned in order.



在线联系供应商

至: Ningbo Hardchn bearing Co., Ltd.
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Mechanical Bearing C35
Mechanical Bearing C35 MAIN CHARACTERISTICS Low vibration, low noise.Suitable for bad and complicated environment.Precision level all over P5 The accuracy of ZXZC deep gr...
Mechanical Bearing 635
Mechanical Bearing 635 MAIN CHARACTERISTICS Low vibration, low noise.Suitable for bad and complicated environment.Precision level all over P5 The high standard achieved e...
Mechanical Bearing 6002
Mechanical Bearing 6002 The accuracy of ZXZC deep groove ball bearings (Mechanical Bearing 6002) are divided into four grades of tolerances with national standard GB/T307....
Mechanical Bearing 6800
Mechanical Bearing 6800 The high standard achieved ensures that every compoment from our fully automated factories will meet the critical standards set by our customers an...
供应产品

Same products

大型齿轮箱塑料 PVC 串联轴承厂 M5CT2047 20*47*99MM 有货
大型齿轮箱塑料 PVC 串联轴承厂 M5CT2047 20*47*99MM 有货 卖方: JinHang Precision Bearing Co.,LTD 串联推力轴承M5CT2047可以在有限的空间内承受重载荷,并在轴向方向上提供牢固的支撑,并且摩擦力低,使用寿命长。 此外,这些轴承通过油润滑移动。 此外,这些串联推力轴承主要用于橡胶和塑料行业的...
 M5CT1858X2多级圆柱滚子轴承现货18*58*107.5mm
M5CT1858X2多级圆柱滚子轴承现货18*58*107.5mm 卖方: JinHang Precision Bearing Co.,LTD 串联推力轴承 M5CT1858 设计用于水平轴应用(挤出机齿轮驱动),必须施加足够的推力载荷以防止滚子滑动。 通常,所需的最小载荷表示为轴承额定动载荷 (C) 与施加载荷 (P) 的比率。 必须...
 M5CT1858 在挤出机齿轮箱中定制大尺寸串联推力轴承 18x58 x126.5mm
M5CT1858 在挤出机齿轮箱中定制大尺寸串联推力轴承 18x58 x126.5mm 卖方: JinHang Precision Bearing Co.,LTD 串联推力轴承 M5CT1858 设计用于水平轴应用(挤出机齿轮驱动),必须施加足够的推力载荷以防止滚子滑动。 通常,所需的最小载荷表示为轴承额定动载荷 (C) 与施加载荷 (P) 的比率。 必须...
 M5CT1242 食品饲料挤出机多级串联轴承工厂 12*42*104.6mm
M5CT1242 食品饲料挤出机多级串联轴承工厂 12*42*104.6mm 卖方: JinHang Precision Bearing Co.,LTD 串联推力轴承 M5CT1242 设计用于水平轴应用(挤出机齿轮驱动),必须施加足够的推力载荷以防止滚子滑动。 通常,所需的最小载荷表示为轴承额定动载荷 (C) 与施加载荷 (P) 的比率。 必须...
5级串联推力轴承用于大型挤出机齿轮箱 M5CT1037E 10x37x99mm
5级串联推力轴承用于大型挤出机齿轮箱 M5CT1037E 10x37x99mm 卖方: JinHang Precision Bearing Co.,LTD 串联推力轴承M5CT1037E可以在有限的空间内承受重载荷,并在轴向方向上提供牢固的支撑,并且摩擦力低,使用寿命长。 此外,这些轴承通过油润滑移动。 此外,这些串联推力轴承主要用于橡胶和塑料行业...