.

M4CT40110 Extruder gearbox bearing for PVC twin extruder machine 40*110*164mm in stock

M4CT40110 Extruder gearbox bearing for PVC twin extruder machine 40*110*164mm in stock

We jinhang precision bearing offer the tandem roller extruder bearing M4CT40110 that use for PVC screw extruder gearbox, the shaft diameter is 40mm, the bearing outer diameter is 110mm.
We had many M4CT40110 Bearing in stock for the customer.
The M4CT40110 Bearing specification as following:
Tandem bearings M4CT40110 consist of several axial cylindrical roller bearings arranged in line, A system of rings and washers matched to each other ensures that all stages of the tandem bearing are subjected to uniform load at all times irrespective of the ratio C/F. The rings and washers are made from hardened steel. Tandem bearings are predominantly fitted with standard axial cylindrical roller and bearing assemblies.

Tandem bearing code Basic size unit(mm) Basic load rating
Unit (KN) weight Delivery time Package
Inner dia Outer dia Height Cr Cor kg Strong carton
M4CT40110 40 110 164 831 3634 7 In stock



在线联系供应商

至: JinHang Precision Bearing Co.,LTD
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

22212EKW33  调心滚子轴承60 * 110 * 28MM
22212EKW33 调心滚子轴承60 * 110 * 28MM 调心滚子轴承22212EKW33圆锥孔 22212 E W33圆柱孔 尺寸:60 * 110 * 28MM 外径:110mm 内径:60mm 高度:28mm 重量1.15公斤 轧材GCr15 保持架材料08AI钢 间隙C1 C2 C3 C0 孔锥孔1:12 润滑脂润滑 交货时间
 挤出机齿轮箱串联轴承五级推力滚子 M5CT420 4x20x54mm 库存
挤出机齿轮箱串联轴承五级推力滚子 M5CT420 4x20x54mm 库存 串联推力轴承 M5CT420 设计用于水平轴应用(挤出机齿轮驱动),必须施加足够的推力载荷以防止滚子滑动。 通常,所需的最小载荷表示为轴承额定动载荷 (C) 与施加载荷 (P) 的比率。 必须避免 C/P > 12 的负载,并且应避免 C/P 介于 8 和 12 之间的负载。 M5CT4...
YRT 395 rotary table bearing
YRT 395 rotary table bearing YRT 395 rotary table bearing JinHang Precision bearing offer high precision YRT 395 rotary table bearing,spindle bearing,crossed roller bearing,cy...
RB4010UUCC0P5 交叉滚子轴承
RB4010UUCC0P5 交叉滚子轴承 RB4010UUCC0P5 crossed roller bearing in stock Bearing type: RB4010UUCC0P5 Dimension:40x65x10mm Inner diameter:40mm Outer diameter:65mm Width:10mm T...
Slewing bearing 011.20.250 specification
Slewing bearing 011.20.250 specification 011.20.250 Belong to four point contact ball slewing bearing with external teeth, We had offered the bearing 011.20.250 to our Europen customer ,No...
供应产品

Same products

单螺杆挤出机齿轮箱使用 M6CT1452A2E 14x52x151mm
单螺杆挤出机齿轮箱使用 M6CT1452A2E 14x52x151mm 卖方: JinHang Precision Bearing Co.,LTD 推力圆柱滚子轴承M6CT1452A2E,尺寸14x52x151mm,内径:14mm,外径:52mm,总高:151mm串联轴承 基本尺寸单位(mm) 基本额定载荷单位(千牛)内径 外径 高度 Cr...
推力圆柱滚子轴承M6CT1242E,尺寸12x42x125.7mm,内径:12mm,外径:42mm,总高:125.7mm 串联轴承 基本尺寸单位(mm) 基本额定载荷 单位(千牛) 内径 外径 高度 Cr Cor M6CT1242E 12 42 125.7 154 534
推力圆柱滚子轴承M6CT1242E,尺寸12x42x125.7mm,内径:12mm,外径:42mm,总高:125.7mm 串联轴承 基本尺寸单位(mm) 基本额定载荷 单位(千牛) 内径 外径 高度 Cr Cor M6CT1242E 12 42 125.7 154 534 卖方: JinHang Precision Bearing Co.,LTD 推力圆柱滚子轴承M6CT1242E,尺寸12x42x125.7mm,内径:12mm,外径:42mm,总高:125.7mm串联轴承 基本尺寸单位(mm) 基本额定载荷单位(千牛)内径 外径 高度 ...
大型齿轮箱中的串联轴承 M6CT630 6x30x89mm 用于塑料挤出
大型齿轮箱中的串联轴承 M6CT630 6x30x89mm 用于塑料挤出 卖方: JinHang Precision Bearing Co.,LTD 推力圆柱滚子轴承M6CT630,尺寸6x30x89mm,内径:6mm,外径:30mm,总高:89mm串联轴承 基本尺寸单位(mm) 基本额定载荷单位(千牛)内径 外径 高度 Cr CorM6CT...
摩擦焊机使用串联滚子轴承 M6CT537 5x37x117mm摩擦焊机使用串联滚子轴承 M6CT537 5x37x117mm
摩擦焊机使用串联滚子轴承 M6CT537 5x37x117mm摩擦焊机使用串联滚子轴承 M6CT537 5x37x117mm 卖方: JinHang Precision Bearing Co.,LTD 推力圆柱滚子轴承M6CT537,尺寸5x27x78mm,内径:5mm,外径:37mm,总高:117mm串联轴承 基本尺寸单位(mm) 基本额定载荷单位(千牛)内径 外径 高度 Cr CorM6C...
深孔钻设备用推力滚子轴承M6CT527 5x27x78mm
深孔钻设备用推力滚子轴承M6CT527 5x27x78mm 卖方: JinHang Precision Bearing Co.,LTD 推力圆柱滚子轴承M6CT527,尺寸5x27x78mm,内径:5mm,外径:27mm,总高:78mm串联轴承 基本尺寸单位(mm) 基本额定载荷单位(千牛)内径 外径 高度 Cr CorM6CT...