Single Row Cylindrical Roller Bearing
Single row cylindrical roller bearings with cages are part of radial roller bearings. Compared with the ball bearings' balls, the rollers have a bigger contact to the roller axle. As a consequence, it can transfer higher forces, has higher stiffness, and in the same capacity load working condition, the diameter of the roller can be smaller. The rollers own profiled ends. For the basic design of all cylindrical roller bearings, the cylindrical rollers are guided within two ribs by at least one ring. This ring matches with the cage and rollers and become a fit unit. The other ring is removable and easier to mount and dismount.In general, the fit of the rings are tight one. Based on different arrangement of the ribs on the inner ring and outer ring, the bearings can be divided into NU, N, NJ, NF and NUP types. And the cage is usually pressed steel cage or machined brass cage.
Type NU and N allow shaft moving, in an axial direction within limits, applicable to use as a free end.
Type NJ and NF can bear a certain extent one-way axial loads. Type NUP can bear a certain extent two-way axial loads.
ZWA has supplied thousands of pieces of single row cylindrical roller bearingto the customers and those bearings favored the customer to reach the following goals:
Increase productivity
Decrease the cost
Higher operational security
Longer maintenance intervals
Longer bearing service life
Features of single row cylindrical roller bearings are as follows
Bear not only high radial loads but also axial loads from one or two directions.
The separable design makes mounting, dismount, maintenance, and inspection easier and effective.
Higher fatigue limit
Lower heat generated from the bearings
Lower consumption on the lubrication
Application fields of single row cylindrical roller bearings are as follows
Steel, gearbox, crane, automobile, vibration equipment, and reducers, etc.
As one of top 10 bearing manufacturers in china, we can offer sorts of related products for sale, if you are interested, please leave us a message.
在线联系供应商
Other supplier products
 |
Single Row Spherical Roller Bearing | Single-row spherical roller bearings are self-retaining radial roller bearings. They also belong tp s;elf-aligning bearings. Benefit from the conca... |
 |
Deep Groove Ball Bearings | Deep groove ball bearing chinaare the typical rolling bearings which have the most widely application. Basic bearing ball deep grooveare made up of... |
 |
Toroidal Roller Bearing | Toroidal roller bearingare kind of new single-row radial bearing. It has crowned symmetrical rollers and circular ring raceways.The rollers of the ... |
 |
Tapered Roller Thrust Bearing | Tapered roller thrust bearingare composed of shaft washer, housing washer, cage and tapered rollers. The design of tapered roller thrust bearings i... |
 |
Spherical Roller Bearings | Spherical roller bearings are designed to adapt to severe misalignment caused by mounting or deflection on the shaft & housing. Not every type ... |
Same products
 |
多级串联精密滚柱轴承T-3092-6A有货 | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号：T-3092-6A项目代码：T-3092-6A结构：基本型串联推力圆柱滚子轴承原产地：中国洛阳润滑：油润滑外形公制尺寸：30*92*294mm它们在橡胶和塑料行业的平行双螺杆挤出机... |
 |
食品螺杆挤出机多级串联推力轴承T-2872-6A | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号：T-2872-6A项目代码：T-2872-6A原产地：中国洛阳润滑：油润滑外形公制尺寸：29*75*165mm外径D:75mm内径d:29mm总高度：165毫米它们在橡胶和塑料行业... |
 |
薄膜螺杆挤出机齿轮箱串联滚柱轴承T-25105 8A | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号：T-25105 8A项目代码：T-25105.8A原产地：中国洛阳润滑：油润滑外形尺寸：25*105*255mm外径D:105mm内径d:25mm总高度：395mm它们在橡胶和塑料... |
 |
PVC螺杆挤出设备齿轮箱滚柱轴承T-25105 8A | 卖方: JinHang Precision Bearing Co.,LTD | 应用：橡胶和塑料工业中单螺杆和双螺杆挤出机的变速箱。深孔钻削设备摩擦焊机。轴承出厂编号：T-25105 8A项目代码：T-25105.8A原产地：中国洛阳润滑：油润滑外形尺寸：25*105*25... |
 |
食品挤出机多级串联推力轴承T-25105.6A工厂现货 | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号：T-25105.6A项目代码：T-25105.6A原产地：中国洛阳润滑：油润滑外形尺寸：25*105*255mm外径D:105mm内径d:25mm总高度：255毫米轴承轴直径：0.... |
