Single Row Cylindrical Roller Bearing
Single row cylindrical roller bearings with cages are part of radial roller bearings. Compared with the ball bearings' balls, the rollers have a bigger contact to the roller axle. As a consequence, it can transfer higher forces, has higher stiffness, and in the same capacity load working condition, the diameter of the roller can be smaller. The rollers own profiled ends. For the basic design of all cylindrical roller bearings, the cylindrical rollers are guided within two ribs by at least one ring. This ring matches with the cage and rollers and become a fit unit. The other ring is removable and easier to mount and dismount.In general, the fit of the rings are tight one. Based on different arrangement of the ribs on the inner ring and outer ring, the bearings can be divided into NU, N, NJ, NF and NUP types. And the cage is usually pressed steel cage or machined brass cage.
Type NU and N allow shaft moving, in an axial direction within limits, applicable to use as a free end.
Type NJ and NF can bear a certain extent one-way axial loads. Type NUP can bear a certain extent two-way axial loads.
ZWA has supplied thousands of pieces of single row cylindrical roller bearingto the customers and those bearings favored the customer to reach the following goals:
Increase productivity
Decrease the cost
Higher operational security
Longer maintenance intervals
Longer bearing service life
Features of single row cylindrical roller bearings are as follows
Bear not only high radial loads but also axial loads from one or two directions.
The separable design makes mounting, dismount, maintenance, and inspection easier and effective.
Higher fatigue limit
Lower heat generated from the bearings
Lower consumption on the lubrication
Application fields of single row cylindrical roller bearings are as follows
Steel, gearbox, crane, automobile, vibration equipment, and reducers, etc.
As one of top 10 bearing manufacturers in china, we can offer sorts of related products for sale, if you are interested, please leave us a message.
Send product request
Other supplier products
Single Row Tapered Roller Bearing | Single row tapered roller bearingas the most widely used tapered roller bearings consist of one outer ring, and one inner ring unit. The inner ring... | |
Deep Groove Ball Bearings | Deep Groove Ball Bearings Deep groove ball bearings are the typical rolling bearings which have the most widely application. Basic deep groove bal... | |
Four Row Tapered Roller Bearing | Four row tapere roller bearingsis composed of two double row inner rings and one double row outer ring consisting two single outer rings. Between t... | |
Toroidal Roller Bearing | Toroidal roller bearingare kind of new single-row radial bearing. It has crowned symmetrical rollers and circular ring raceways.The rollers of the ... | |
Tapered Roller Bearings | China tapered roller bearings, also known as TRB bearing, are also a kind of bearing that can be separated, a tapered raceway featured the inner an... |
Same products
Cylindrical roller bearing 527272 for strander machine | Seller: JinHang Precision Bearing Co.,LTD | cylindrical roller bearings Z-527272.ZL with cage are available as non-locating, semi-locating an... | |
Tubular Stranding machine use bearing 527247 | Seller: JinHang Precision Bearing Co.,LTD | Bearing description:single row cylindrical roller bearing Service:offer drawing and technical sup... | |
Tubular Stranding machine use bearing 527462 | Seller: JinHang Precision Bearing Co.,LTD | The cylindrical roller bearings 527462 have high rigidity, high radial load carrying capacity. B... | |
Stainless steel wire stranding machine 537024P5 | Seller: JinHang Precision Bearing Co.,LTD | The bearings Z-537024.ZL can be lubricated from the end faces using grease or oil.The bearing 537... | |
Cylindrical roller bearing 527461 for Tubular twister | Seller: JinHang Precision Bearing Co.,LTD | Bearing factory items:Z-527461.ZL Bearing old type: 527461 The bearing z-527461.zl structure:sin... |