SMC Antenna Reflector Mould
SMC AntennaReflector Mould
The satellite earth antenna is the important earth satellite equipment to collect the weak signal from satellite and reduce noise to the lowest level within its ability. The traditional materials for satellite antenna are iron or aluminium. But the better properties of SMC material can boost the accuracy of satellite antenna. The good performance of antennaSMCis comparable to a metal one.
Features of SMC antenna
(1) High precision, high efficiency, and high gain.
The design of SMC antenna mold takes consideration of shrinkage ratio of the material and molding shrinkage rate, so the SMC antenna reflective surface has a smaller shape from the original design paraboloid after molding. SMC antenna comes with small reflective surface.
(2) Corrosion resistance
SMC is non-metal dielectric composite material, has good acid resistance, water resistance and corrosion resistance.
(3) long life
The service life of SMC molded antennas is generally more than 15 years; PROMLIN's prototype SMC mold in 1985 are still working normally, and they have been subject to typhoons and heavy rain every year.
(4) Strong wind resistance
The design of antenna adopts multiple longitudinal and circumferential rib structures. It can withstand a wind load of 45 m/s.
(5) Special reflective layer technology
A metal aluminum mesh is applied on the reflective surface, which can reflect electromagnetic waves and insulate the atmosphere, and plays a good protective role.
(6) Good consistency, no deformation, easy to transport and install
Membrane pressure technology adopted delivers good consistency, no deformation, and make it easy to transport and install.
SMC antenna mold specification
|
Product name |
SMC Satellite Dish Antenna Mould |
|
Product Material |
PP, PC, PS, PA6, POM, PE, PU, PVC, ABS, PMMA etc |
|
Mould cavity |
L+R/1+1 etc |
|
Mould life |
500, 000 times |
|
Mould testing |
All of the moulds can be well tested before the shipments |
|
Shaping Mode |
Pressure mold |
Design of SMC antenna
Draft angle: draft angle should be enough to allow smooth demoulding without damage.
Round angle: Stress is prone to accumulate the the right angle. A round angle can not only disperse stress, but also give a aesthetic touch, and serves as protection in quenching and working.
Quality Control Procedures for SMC Antenna Mould
Inspect steel hardness and dimension
Inspect Electrodes
Inspect dimension of parts
Inspect before assembly
Inspect trial report and samples
Inspect before shipment
Custom Service for SMC Antenna
Meet your specific needs
Experts and technicians available to give professional advice on your custom needs
Optimized quality possible
If you want to know more types of bmc compound, please visit our website.
Establithd in 2010 and located in Chengnan Development Zone, Luothe Tow, Huzhou City, Zhejiang Province, Zhejing Aobang Technology Co. L.d. not only has a mature and extensive prodution line of SMC/BMC moulds but also possesses many refined testing laboratoies in the industry. Whether at home or abroad, Zhejiang Aobang Techmnology Co. Ltd. can manufacture top-qulity SMC BMCcompositewith advanced mold making concepts and technologies. As a professional SMC/BMC moulds manufactuer, Waiwai Tree is a hightech enterpise who enjoys a good fame in the new motor and energy automobile industry both at home and abroad.
在线联系供应商
Other supplier products
 |
BMC/SMC Mould | BMC/SMC plasticMoulding Description: We mainly use injection molding and pressure molding as the methods. When designing the flow channel and part... |
 |
Flange Molding | Flanged joint is the main connection method in pipeline construction. Compared to thermoplastic, thermoset composite can be reprocessed. With high ... |
 |
Principle Analysis of Over Moulding Technology for Injection Mold | In the past 10 years, over-mouldingtechnology has completely changed the aesthetic standards, design ideas and functional requirements of consumer ... |
 |
BMC, SMC, GRP, GFK Ceiling | Aobang composite ceiling is divided into: BMC ceiling, SMC ceiling, GRP ceiling, GFK Ceiling. The ceiling materials have been developed for more t... |
 |
BMC, SMC, GRP, GFK Roof Tiles | Aobang composite roofing tiles is divided into: BMC roofing tiles, SMC roofingtiles, GRP roofing tiles, GFK roof tiles. Do you konw what is gfk ... |
Same products
 |
BMC/SMC Molded Products | 卖方: ZHEJIANG AOBANG TECHNOLOGY CO.,LTD | BMCSMCthermosetting plastic products are produced by SMC and BMCmoldingprocess. PRODUCTS Type... |
|
|
SMC Antenna Reflector Mould | 卖方: ZHEJIANG AOBANG TECHNOLOGY CO.,LTD | SMC AntennaReflector Mould The satellite earth antenna is the important earth satellite equipmen... |
 |
Auto Parts Mould | 卖方: ZHEJIANG AOBANG TECHNOLOGY CO.,LTD | BMC Car PartsMould Automobiles are different in size and shape. That means automobile suppliers ... |
 |
Plastic Household Mould | 卖方: Unique Solutions Mold | Plastic Household Mould The smart switches and smart sockets of the smart home systems have the ... |
 |
Overmolding & 2k Molding | 卖方: Unique Solutions Mold | Molding Over Molding& 2k Molding The same type of material of different colors is usually us... |
