SMC Antenna Reflector Mould
SMC AntennaReflector Mould
The satellite earth antenna is the important earth satellite equipment to collect the weak signal from satellite and reduce noise to the lowest level within its ability. The traditional materials for satellite antenna are iron or aluminium. But the better properties of SMC material can boost the accuracy of satellite antenna. The good performance of antennaSMCis comparable to a metal one.
Features of SMC antenna
(1) High precision, high efficiency, and high gain.
The design of SMC antenna mold takes consideration of shrinkage ratio of the material and molding shrinkage rate, so the SMC antenna reflective surface has a smaller shape from the original design paraboloid after molding. SMC antenna comes with small reflective surface.
(2) Corrosion resistance
SMC is non-metal dielectric composite material, has good acid resistance, water resistance and corrosion resistance.
(3) long life
The service life of SMC molded antennas is generally more than 15 years; PROMLIN's prototype SMC mold in 1985 are still working normally, and they have been subject to typhoons and heavy rain every year.
(4) Strong wind resistance
The design of antenna adopts multiple longitudinal and circumferential rib structures. It can withstand a wind load of 45 m/s.
(5) Special reflective layer technology
A metal aluminum mesh is applied on the reflective surface, which can reflect electromagnetic waves and insulate the atmosphere, and plays a good protective role.
(6) Good consistency, no deformation, easy to transport and install
Membrane pressure technology adopted delivers good consistency, no deformation, and make it easy to transport and install.
SMC antenna mold specification
|
Product name |
SMC Satellite Dish Antenna Mould |
|
Product Material |
PP, PC, PS, PA6, POM, PE, PU, PVC, ABS, PMMA etc |
|
Mould cavity |
L+R/1+1 etc |
|
Mould life |
500, 000 times |
|
Mould testing |
All of the moulds can be well tested before the shipments |
|
Shaping Mode |
Pressure mold |
Design of SMC antenna
Draft angle: draft angle should be enough to allow smooth demoulding without damage.
Round angle: Stress is prone to accumulate the the right angle. A round angle can not only disperse stress, but also give a aesthetic touch, and serves as protection in quenching and working.
Quality Control Procedures for SMC Antenna Mould
Inspect steel hardness and dimension
Inspect Electrodes
Inspect dimension of parts
Inspect before assembly
Inspect trial report and samples
Inspect before shipment
Custom Service for SMC Antenna
Meet your specific needs
Experts and technicians available to give professional advice on your custom needs
Optimized quality possible
If you want to know more types of bmc compound, please visit our website.
Establithd in 2010 and located in Chengnan Development Zone, Luothe Tow, Huzhou City, Zhejiang Province, Zhejing Aobang Technology Co. L.d. not only has a mature and extensive prodution line of SMC/BMC moulds but also possesses many refined testing laboratoies in the industry. Whether at home or abroad, Zhejiang Aobang Techmnology Co. Ltd. can manufacture top-qulity SMC BMCcompositewith advanced mold making concepts and technologies. As a professional SMC/BMC moulds manufactuer, Waiwai Tree is a hightech enterpise who enjoys a good fame in the new motor and energy automobile industry both at home and abroad.
Send product request
Other supplier products
 |
BMC, SMC, GRP, GFK Building & Decoration Materials | Building decoration materials, also known as building finishing materials, refer to the materials laid or painted on the surface of buildings to de... |
 |
BMC, SMC, GRP, GFK Wall Panel | Composite wall panel is a new generation of high performance building partition board made of a variety of building materials instead of traditiona... |
 |
BMC/SMC Motor | BMC/SMC Motor Description BMC power motorreplaces traditional iron and aluminum, reduces the process, seals more, and has higher safety factor. It... |
 |
SMC/BMC Antenna Reflector | SMC BMCAntenna Reflector High precision, high efficiency, and high gain The most important job of using SMC for the manufacture of antennas is ... |
 |
BMC/SMC Molded Products | SMC, BMC thermosetting plastic products are produced by SMC and plastic smcmolding process. Types of BMC/SMC Molded Products BMC SMCMotor SM... |
Same products
 |
For Mercedes-Benz-C-206 Modified Bumper Mould | Seller: Taizhou Huangyan Chenpeng Mould Co., Ltd. | Taizhou Huangyan Chenpeng Mold Co., Ltd. is a professionalwholesale Mercedes-Benz-C-206 Modified ... |
 |
Front Bumper Lower Lip Mould For 2021 Honda CRV | Seller: Taizhou Huangyan Chenpeng Mould Co., Ltd. | Introducing the for 2021 Honda CRV Front Bumper Lower Lip Mould: Elevate Your Driving Experienc... |
 |
Bottle cap mold | Seller: Taizhou Huangyan Yongsheng Mould Co., Ltd. | Taizhou Yongsheng Mould Co., Ltd. can produce cap moulds （）within 64 cavities. The hot runner or ... |
 |
Plastic Injection Mould For 2009 Audi A5 Front Bumper | Seller: Taizhou Huangyan Chenpeng Mould Co., Ltd. | Our Advantage:1.We have developed about 1000 PCS bumper mould since we founded.2.Our company's mo... |
 |
Double Color Mold For Car Head Lighting Two-Shot Mold | Seller: Taizhou Toolsong Mould Co., Ltd. | Double Color Mold For Car Head Lighting Two-Shot Mold Double color lens mold for car head lighti... |
