Three screw pump
Three screw pump
The 3GR type three-screw pumpis a rotor type positive displacement pump. The principle is that the primary and secondary moving screws cooperate with the meshing and then use the inner and outer parts of the bushing with three holes to cooperate, so that the oil pump inlet and outlet have a number of sealed chambers. This chamber will allow the oil pump to continuously enter the inside of the oil pump during operation, will enter the screw oil pump, then use the axial movement to move the liquid to the outlet and also allow the input to gradually increase to form a It is continuous, stable and also capable of axially moving the pressurized liquid.
Parameters
Flow rate: Q=2～320m3/h
Pressure: H=0.1～4.0 Mpa
Speed: n=400rpm/630rpm/720rpm/960rpm
Viscosity: 3.0～760mm²/s；
Temperature: T=-20～120℃
ZGPV screw pumpFeatures
3GR screw pump has a simple structure: it has various structural forms, generally a small flow rate of 0.2~6.5m3/h. The pump body and bushing of the 3GR screw pump are integrated (collectively referred to as the pump body), and the shaft seal is a mechanical seal. The pump bushing above the medium flow is a separate part fixed in the pump body. The large flow pump is mostly made into a double suction structure horizontal installation. The shaft seal has two kinds of mechanical seal and packing seal depending on the transport medium. ZGPV screw pumpis installed in both horizontal and vertical versions. The prime mover is AC and DC marine motors.
3GR screw pump has a long service life: the active screw of the 3GR screw pump is driven by the motor, there is no mechanical contact between the main and the slave rods, and the pressure liquid is driven to rotate from the rod around the shaft line, between the main and the slave rods. There is a layer of oil film protection between the screw and the bushing, so the mechanical friction of the pump is extremely small and the service life is long.
The liquid pumped by the 3GR screw pump moves linearly in the pump at a constant speed, so the pressure pulsation is small, the flow rate is stable, and the noise is low. Since the inertia of the rotating component is small, the starting torque and vibration are small.
3GR screw pump has high suction capacity.
Structure
MOC
|
Description |
Material |
||||||
|
Anti-corrosion alloy |
Cast steel |
Stainless steel |
|||||
|
China standard |
ASTM standard |
China standard |
ASTM standard |
China standard |
ASTM standard |
||
|
1 |
Pump casing |
20# Alloy Titanium Nickel 904L Ti/Pd Alloy Monel |
Hastelloy Monel Ⅱ-B Ⅱ-C Ni-Resist1 Ni-Resist2 Ni-Resist3 |
25# 35# |
WCA WCB |
ZG1Cr13 ZG2Cr13 ZG00Cr18Ni10 ZG0Cr18Ni9 ZG0Cr18Ni12Mo2Ti ZG0Cr17Ni4CuNb ZG1Cr18Ni9 ZG1Cr18Ni9Ti ZG00Cr17Ni14Mo2 0Cr26Ni5Mo2 0Cr17Mn13Mo2N 00Cr18Ni5Mo3Si2 |
CA-15 CA-15M CF-3(304L) CF-8(304) CF-8M(316) CF-3M(316L) CN-7M(320) CD-4MCu |
|
2 |
Stator |
||||||
|
3 |
Rotor |
||||||
|
4 |
Suction chambe |
||||||
|
5 |
Intermediate shaft |
Carbon steel SS420 2205 SS304 SS316 |
|||||
|
6 |
Bearing housing |
Cast iron |
|||||
ZGPV screw pumpApplication
Three-screw pump is suitable for lubricating oil and lubricating liquid for fuel oil, lubricating oil, hydraulic oil, crude oil, and other similar oils.
To handle industrial and domestic wasterwater, and muddy water containing solid particles and short fibre;To handle mediums such as oil remains in oil tankers,oil water,oil residue and etc.;
To handle thick paste ,emulsified paste,unguent cosmetics and etc.;
To handle adhesive starch ,cooking oil ,honey, pulpy sugar, mashed fruit,cream and other leftovers;
To handle paste in the industries of brewage,construction ,mining ,printing ,papermaking and etc
screw pump manufacturer: Sichuan Zigong Pump & Valve Co., Ltd.
Visit company website:
在线联系供应商
Other supplier products
 |
Stainless steel magnetic drive pump | Stainless steel magnetic drive pump CQB type stainless steel magnetic drive pump(ie magnetic pump) is applied by modern magnetic principle. It adop... |
 |
轴流泵 | 产品简介: 拥有8项专利技术，ZW轴流泵综合性能在国内同类产品中名列前茅。产品为省级成果奖，荣获中国机械工业技术进步奖。从直径250mm到1500mm，每一种规格都有大量的实际销售成果。ZW轴流泵广泛应用于大流量、低总扬程应用的强制循环泵，如:MVR水处理、真空盐、氧化铝、硫酸钠、氯碱、制... |
 |
耐腐蚀耐高温钛材离心泵 | 简介: HZ系列化工流程泵包括HZ(闭式叶轮型)、HZJ(半开式叶轮型)和HZQ(全开式叶轮型)。具有抗汽蚀性能更好、密封性能稳定、运行平稳、维修方便等优点，我公司精心研制的新一代化工流程泵，具有零部件的高互换性，高性能的机械密封，可生产各种防腐蚀材料的化工流程泵，在化工领域得到广泛的应用。... |
 |
钛材耐腐蚀离心泵 | 简介: HZ系列化工流程泵包括HZ(闭式叶轮型)、HZJ(半开式叶轮型)和HZQ(全开式叶轮型)。具有抗汽蚀性能更好、密封性能稳定、运行平稳、维修方便等优点，我公司精心研制的新一代化工流程泵，具有零部件的高互换性，高性能的机械密封，可生产各种防腐蚀材料的化工流程泵，在化工领域得到广泛的应用。... |
 |
哈氏合金耐酸耐高温离心泵 | 简介: HZ系列化工流程泵包括HZ(闭式叶轮型)、HZJ(半开式叶轮型)和HZQ(全开式叶轮型)。具有抗汽蚀性能更好、密封性能稳定、运行平稳、维修方便等优点，我公司精心研制的新一代化工流程泵，具有零部件的高互换性，高性能的机械密封，可生产各种防腐蚀材料的化工流程泵，在化工领域得到广泛的应用。... |
Same products
 |
盛辉供应商2CY 系列船用电动高压润滑油齿轮泵 | 卖方: 河北盛辉泵业 | 2CY 系列输油泵主要由齿轮、轴、泵体、安全阀、轴端密封件等组成。齿轮经过热处理，具有高硬度和高强度，与轴一起安装在可更换的轴套中，用于旋转工作。适用于输送温度低于 300℃、粘度 5&time... |
 |
工厂直销 LC 系列高粘度罗茨燃油输送泵 | 卖方: 河北盛辉泵业 | LC 高粘度油泵通常用于输送高粘度油和其他流体，包括油漆、润滑油、原油、玻璃胶等。它还可用于输送豆酱、糖浆和酵母等食品级物料。该设备具有效率高、操作简便、功耗低、自吸能力强、不吸油等特点。圣汇生... |
 |
高性能 LCB 系列高温沥青齿轮泵 | 卖方: 河北盛辉泵业 | 当您需要输送常温下无腐蚀性、无固体颗粒、不凝固的介质时，LCB系列齿轮泵是您的最佳选择，尤其适用于室外安装在高寒地区以及需要对介质进行保温处理的场合。 |
 |
2024年热销YQB系列液化石油气加气输送泵 | 卖方: 河北盛辉泵业 | YQB系列液化石油气输送泵常用于输送液化石油气、液氨、丙烯、丙烷、环氧乙烷、甲醇及各种性质类似石油的挥发性液体或石油产品，特别适用于液化石油气装卸车、加料车间、充装钢瓶等工作场所。 |
 |
OEM 卧式 SN 系列船用高压燃油三螺杆泵 | 卖方: 河北盛辉泵业 | SN系列三螺杆泵适用于输送润滑油、低润滑性液体、无腐蚀性矿物油、粘稠液体等润滑性液体介质，如润滑油、燃料油、重柴油及各种合成橡胶液等。该机结构紧凑，体积小，振动小，自吸能力强等特点。 |
