Tobee® Bearing Assembly SH005M for 14/12ST-AH Slurry Pump
Tobee® SH005M Bearing Assemblyfor 14/12ST-AH Slurry Pump, it also used for 12/10ST-AH Slurry Pump and 10/8ST-AH Slurry Pump.
Slurry Pump Bearing Assembly SH005Malso called rotor assembly which an important driven part of the 14x12 ST-AH slurry pump, It is a large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame. It is most important part for drive power unit. The bearing assembly is to connect the pump and motor as a complete pump working system. Its stability will directly affect pump operation and work-life.
It is mainly composed of 13 parts: 1. Labyrinth, 2. End cover, 3. Bearing, 4. Shaft, 5. Bearing housing, 6. Shim, 7. Grease cap, 8. Piston ring, 9. Labyrinth ring, 10. Bearing seal, 11. End cover set screw, 12. Shaft key, 13. Oil cup.
Bearing Assembly Design Features:
√ The main function of the bearing housing is to support the shaft and the bearing, ensure rotation on the axis, bear the force, and connect the working body to the power.
√ The bearings bear the meridional and axial forces to achieve effective rotation. The installation clearances of the bearings of different bearing assemblies in the slurry pump are different.
√ The shaft is the centerline of the pump rotation. The two ends are used to connect the impeller and the coupling, connect the active parts, and transfer the power to the working parts.
√ The bearing end cover is used to fix and locate the accurate position of the shaft, adjust the assembly clearance of the bearing, and bear the axial force of the pump.
√ The lubrication of the bearings in the slurry pump bearing assembly uses lithium-based grease as the grease.
√ The installation of the bearing assembly is very important. Improper installation can easily cause the failure of the slurry pump to run, or cause the slurry pump to run unstable, broken shaft, vibration, etc.
HEBEI TOBEE PUMP CO.,LIMITED
Email:
| |
在线联系供应商
Other supplier products
 |
Tobee® 6x4E-AH Slurry Pump | Tobee® 6x4E-AH Slurry Pumpis designed for continuous conveying highly abrasive and high-hardness, high-concentration, low-corrosion slurries co... |
|
|
Tobee® Bearing Assembly SH005M for 14/12ST-AH Slurry Pump | Tobee® SH005M Bearing Assemblyfor 14/12ST-AH Slurry Pump, it also used for 12/10ST-AH Slurry Pump and 10/8ST-AH Slurry Pump. Slurry Pump Beari... |
 |
Tobee® 10/8F-AHR Rubber Lined Slurry Pump | Tobee® 10/8F-AHR Rubber Lined Slurry Pumpadopts double-casing structure, It is more easy for use and maintenance. Wetted parts are made from na... |
 |
Tobee® Slurry Pump Hi-seal Stuffing Box G078HS1D21 | Tobee®Hi-seal Stuffing Box G078HS1D21is one of shaft seal parts in 10x8ST-AH Centrifugal Slurry Pump. It also can be installed on 12x10ST-AH Sl... |
 |
Tobee® HH High Head Slurry Pump | Tobee®HHHigh Head SlurryPumplines were designed to produce high heads per stage at high pressures, Commonly used for long distance transport li... |
Same products
 |
WN(Q) Dredging Pump | 卖方: Shijiazhuang Chongmu Fluid Machine Co., Ltd | The dredging pumpis a kind of mud pump developed by our company, which is used for dredging and h... |
 |
IH Stainless Steel Centrifugal Pump | 卖方: Shijiazhuang Chongmu Fluid Machine Co., Ltd | The IH type single-stage single-suction cantilever chemical centrifugal pump is an energy-saving ... |
 |
Horizontal Multistage Pump | 卖方: Shijiazhuang Chongmu Fluid Machine Co., Ltd | Looking for a reliable horizontal multistage pump manufacturerwith high-quality, durable, and exp... |
 |
Diaphragm Pump DP03BL Series | 卖方: PJM MECHANICAL CO.LTD | Diaphragm Pump DP03BL Series We specifically manufacture DP03BL diaphragm pump for use in medica... |
 |
Gr300 Pneumatic Conveying Equipment/Air Vacuum Powder Automatic Conveying Equipment | 卖方: Greentech International (Zhangqiu) Co., Ltd | Cast Iron Blow Through Airlock Valve Positive Rotary FeederRotary airlocks displace bulk solids f... |
