Honghai Thermal oil pump
Brief Introduction
This series of thermal oil pump is produced on the basis of air-cooled hot oil pump, which is able to resist higher temperature. It adapts high technology and works high efficiency. Under high temperature, it’s able to work steadily without any leakage. As well, water cooling system is more safe and reliable.
This water-cooled thermal oil pump is scientific-constructed, mainly for conveying liquids with high temperature, below 350℃ is acceptable. It’s suggested to transport weak corrosive fluid without any solid particles. Honghai Thermal oil pump is an ideal circulating pump.
As for the corrosion resistance ability and temperature, the material of the relevant spare parts determines.
Theory: Centrifugal Pump
Feature
- Polytetrafluoroethylene is used for lips sealing, which greatly improve the sealing property, about 25 times reliable than the rubber sealing.
The materials contacting the liquids are mainly 1.HT200；II.ZG230-450；III.1Cr18Ni9Ti，OCr18Ni12-Mo2Ti.
Application
Now you can see that Honghai thermal oil pumps are widely used in many areas like petrol, chemistry, rubber, plastics, pharmacy, textile, printing and dyeing, food and road construction
在线联系供应商
Other supplier products
 |
Horizontal centrifugal pump | Horizontal centrifugal pump 2.good performance 3.reliable operation 4.high-temperature 5.small volume,save cost Applications 2.Chemical Industr... |
 |
ZYB Series Booster Fuel Pump | ZYB Series Booster Fuel Pump Advanced structure small volume big capacity low noise long service life Honghai ZYB series booster fuel gear pump is... |
 |
3RP Series Rotary Lobe Pump | 3RP Series Rotary Lobe Pump Outstanding self-priming ability high efficiency long life Brief Introduction It applies to delivering suspension liq... |
|
|
Honghai Thermal oil pump | Brief Introduction This series of thermal oil pump is produced on the basis of air-cooled hot oil pump, which is able to resist higher temperature.... |
 |
AY series single two-stage centrifugal oil pump | Honghai AY series single two-stage centrifugal oil pump High Effective Energy Saving AY two-stage centrifugal pump Advanced technology High effici... |
Same products
 |
OEM 定制卧式 LB 系列冰箱润滑油齿轮泵 | 卖方: 河北盛辉泵业 | LB 系列冷冻机齿轮泵适用于输送粘度在 200°E （1500mpa.s）以下，无固体颗粒杂质，温度不高于 120° 的各种机械油、透平油及其它性质相近，性能平稳的介质。该设备结... |
 |
OEM 定制卧式 LB 系列冰箱润滑油齿轮泵 | 卖方: 河北盛辉泵业 | LB 系列冷冻机齿轮泵适用于输送粘度在 200°E （1500mpa.s）以下，无固体颗粒杂质，温度不高于 120° 的各种机械油、透平油及其它性质相近，性能平稳的介质。该设备结... |
 |
新款 YHCB 系列可移动卧式圆弧齿轮输油泵 | 卖方: 河北盛辉泵业 | YHCB 系列圆弧齿轮泵专为输送高粘度流体（如油、树脂和化学溶液）而设计。这些泵广泛应用于需要精确可靠地处理流体的行业，包括石化、食品加工和制药行业。它们设计坚固、流量控制精确、易于维护，是需要... |
 |
便携式WCB系列不锈钢高粘度柴油齿轮输送泵 | 卖方: 河北盛辉泵业 | WCB齿轮油泵重量轻，体积小，携带移动方便。结构采用联轴器与介质隔离，联轴器单独润滑，齿轮采用合金钢，采用特殊的热加工工艺，表面硬度可达HRC60以上，耐磨性强，使用寿命长。与其它普通型泵相比，... |
 |
库存 ZYB 系列不锈钢废重油输送高压齿轮泵 | 卖方: 河北盛辉泵业 | ZYB系列废油泵用于抽送温度不高于200℃，粘度不大于150mm2/S含有非金属杂质的重油、柴油、煤焦油及粮油、化工、建材、日化等产品中的杂质。本机采用自密封润滑设计，间隙自动调整结构，零件采用... |
