W446 修井机用活塞泵
ELW-440/446 Pump can be widely used in all kinds of works in oil field. When the cylinder liner specification is 6”-3 1/2”, piston structure is recommended and it is suitable for Oil-Well Repair and shallow-well drilling, etc. When the cylinder liner specification is 3 1/4”-2”, axial piston structure is recommended and it is suitable for high-pressure work.
ELW446 Mud Pump TECHNICAL SPECIFICATION
Rated input power 328KW (440HP) Rated Stroke 320 Stroke/Minute(320SPM) Stroke 152.4mm （6”） Gear Ratio 4.578 :1 Max. operation pressure 35Mpa Valve chamber Valve-Over API 4# Max. liner dia. 6” Max. liner mud pressure(160 stroke/minute)16.9Mpa Dia. of suction manifold, 6”(150#) Flange Dia. of discharge manifold 3”(900#) Flange Dia. pinion shaft 95.25 mm(3.75”) Key 22.174x15.9mm Dimension:(No included base),2479X1219X1103 mm
Fluid End Expendables & Accessories
Liner: hy-chrome liner, zirconia liner, ceramic liner, chrome-plated liner, hardned liner
Piston: nitrile rubber piston, supreme piston, polyurethane piston, urethane bonded piston, green duo piston, blue lightning piston, white lightning piston
Valve & Seat: three-web valve seat, four-web valve seat, full open valve seat, Bomco type valve seat, NOV valve seat, Mission valve seat, Southwest valve seat
Pulsation Dampener: KB45,KB75,PD45,PD55,K10,K20
Module: “I” shaped module, “L” shaped module, suction module, discharge module
Spare parts: Upper and lower Valve Guide, Liner Gasket, Piston Rod, Rod Clamp, Valve Cover, Valve Cover Seal, Cylinder head, Cylinder Head Gasket, Cylinder Head Flange/Threaded Ring, Alignment Ring, Wear Plate, Cylinder Head Plug, Liner Flange, Liner Lock, Mud Baffle
Power End Parts
Pony Rod/Extension Rod, Stuffing Box, Stuffing box Seal Parts, Crosshead, Crosshead Guide, Crosshead Pin, Crosshead Bearing, Connection Rod, Bull Gears, Pinion Shaft, Pinion Shaft Bearing/Bearing Carrier/Oil Seal Gasket/, Crank Shaft, Crank Shaft Bearing/Bearing Carrier, Eccentric Bearing, Inner/outer Race Retainer, Gauges, Oil Lubrication Pump, Mud Pump Transmission Belt Pulley/V-belt
Contact: manager(at)
Web:
在线联系供应商
Other supplier products
 |
国民油井12p60泥浆泵陶瓷缸套 | Eastland Industrial Supply Limited supplies forged and casted steel pulsation dampeners which are inter-changeable and compatible with Hydril serie... |
|
|
W446 修井机用活塞泵 | ELW-440/446 Pump can be widely used in all kinds of works in oil field. When the cylinder liner specification is 6”-3 1/2”, piston stru... |
 |
Hydril K10/K20 泥浆泵空气包胶囊 | Eastland Industrial Supply Limited supplies forged and casted steel pulsation dampeners which are inter-changeable and compatible with Hydril serie... |
Same products
 |
用于沥青的高性能工业 RY 系列导热油离心输送泵 | 卖方: 河北盛辉泵业 | RY 系列热油离心泵具有结构合理、性能优良、使用可靠等特点。它适用于输送不含固体颗粒和纤维、温度不高于 300 ° C、粘度为 5-1500 cst 的润滑油或与润滑油类似的其他液体以及... |
 |
批发 KCB 系列高温电动齿轮输油泵 | 卖方: 河北盛辉泵业 | 本机属于大流量外啮合齿轮泵，适用于输送温度低于 200°C 的非腐蚀性润滑油、不含固体颗粒和纤维的液体，如原油、柴油、润滑油、动植物油等。它专为各种工业应用中的流体输送而设计。 |
 |
2BE1403-0 Liquid Rin2BE1403-0 Liquid Ring Vacuum Pump/Vacuum Pumpg Vacuum Pump/Vacuum Pump | 卖方: Greentech International (Zhangqiu) Co., Ltd | 2BE1 403-0 Liquid Ring Vacuum Pump2BE1series liquidring vacuum pumps and compressors are the prod... |
 |
2BE1405-1 Liquid Ring Vacuum Pump/Chemical Pump | 卖方: Greentech International (Zhangqiu) Co., Ltd | 2BE1 405-1 Liquid Ring Vacuum Pump2BE1series liquidring vacuum pumps and compressors are the prod... |
 |
2be1406-2b2be1406-1 Liquid Ring Vacuum Pumpe1406-1 Liquid Ring Vacuum Pump1 Liquid Ring Vacuum Pump | 卖方: Greentech International (Zhangqiu) Co., Ltd | 2BE1 406-1 Liquid Ring Vacuum Pump2BE1series liquidring vacuum pumps and compressors are the prod... |
