API610 OH2 Horizontal Overhung Centerline mounted Low-Flow Petrochemical Process Pump
Standards: ISO 13709/API 610 (OH2)
Operating Parameters:Capacity Q: 0.8 to 12.5 m³/h ( 2.2-55 gpm ) / Head H: up to 125 m ( 410 ft ) / Pressure P: up to 5.0 MPa ( 725 psi ) / Temperature T: -80 to 450 ℃ ( -112 to 842 ℉ )
Features:Standard modularization design / Low-flow design / The rear pull-out design enables the bearing pedestal including impeller and shaft seal to be removed with the volute casing left in position / Shaft sealed by cartridge mechanical seal +API flushing plans.ISO 21049/API682 seal chamber accommodates multiple seal types / Full interchangeability with ZA/ZE bearing assembly and mechanical seals / Efficient airfins cooled bearing housings / High radial load roller bearing. Back-to-back angular contact bearings handle axial loads / The pump rotation is clockwise when looking from the drive end / Jack screws (motor side) for an easier alignment setting / Bearing lubrication and cooling options:Oil mist /Fan cooling
在线联系供应商
Other supplier products
 |
API685 Horizontal Overhung Centerline mounted Sealless Magnetic Drive Pump | Standards : API 685 / ISO 15783 Operating Parameters :Capacity Q: up to 650 m³/h ( 2860 gpm ) / Head H: up to 220 m ( 720 ft ) / Pressure P: u... |
 |
Submersible Large flow channel Blockless Solids Handling Pump | Standards :JB/T8857-2011 Operating Parameters: Capacity Q: up to 7000 m³/h ( 30820 gpm ) / Head H: up to 60 m ( 197 ft ) / Pressure P: up to 1... |
 |
API685 Horizontal Overhung Close-Coupled Self-Priming Sealless Magnetic Drive Pump | Standards:API 685 / ISO 15783 Operating Parameters :Capacity Q: up to 160 m³/h ( 700 gpm ) / Head H: up to 95 m ( 310 ft ) / Pressure P: up to... |
 |
API610 BB1 Horizontal Foot mounted Single Case Single Stage Axially Split Chemical Pump | Standards: ISO 13709/API 610(BB1) Operating Parameters :Capacity Q: up to 10000 m³/h ( 44030 gpm ) / Head H: up to 180 m ( 590 ft ) / Pressure... |
 |
API610 OH1 Horizontal Overhung Petrochemical Process Pump | Standards:ISO 13709/API 610 (OH1) Operating Parameters:Capacity Q: up to 2600 m³/h ( 11450 gpm ) / Head H: up to 250 m ( 820 ft ) / Pressure P... |
Same products
 |
danfoss hydraulic motor supplier | 卖方: Baoding Dingsen Hydraulic Equipment Sales Co., LTD | danfoss hydraulic motor supplier Danfoss Hydraulic Motor – Overview A Danfoss hydra... |
 |
rexroth hydraulic motor | 卖方: Baoding Dingsen Hydraulic Equipment Sales Co., LTD | rexroth hydraulic motor Rexroth Hydraulic Motor – Overview A Rexroth hydraulic moto... |
 |
parker hydraulic pump supplier | 卖方: Baoding Dingsen Hydraulic Equipment Sales Co., LTD | parker hydraulic pump supplier Parker Hydraulic Pump Supplier – Simple Introduction ... |
 |
eaton hydraulic pump remanufactured manufacturer | 卖方: Baoding Dingsen Hydraulic Equipment Sales Co., LTD | eaton hydraulic pump remanufactured manufacturer Remanufactured Eaton Hydraulic Pumps &ndash... |
 |
danfoss hydraulic pump supplier | 卖方: Baoding Dingsen Hydraulic Equipment Sales Co., LTD | danfoss hydraulic pump supplier Danfoss Hydraulic Pump Supplier – Simple Overview A... |
