.

ISO2858 ISO5199 Standard Horizontal Overhung Chemical Process Pump

Standards : ISO 2858 / ISO 5199
Operating Parameters: Capacity Q: up to 2000 m³/h ( 8800 gpm ) / Head H: up to 160 m ( 525 ft ) / Pressure P: up to 2.5 MPa ( 363 psi ) / Temperature T: -30 to 180 ℃ ( -20 to 356 ℉ )
Features :Standard modularization design / The rear pull-out design enables the bearing pedestal including impeller and shaft seal to be removed with the volute casing left in position. The driver does not need to be removed if a spacer coupling is used / The standard seal arrangement has three options: gland packing,single mechanical seal and double seal / GB9113.1-2000 PN 2.5MPa suction and discharge flanges are standard. Other standards may also be required by the user / The pump rotation is clockwise when looking from the drive end. / Jack screws (motor side) for an easier alignment setting


在线联系供应商

至: Yantai Shengquan Pump Co., Ltd
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

API610 BB1 Horizontal Foot mounted Single Case Single Stage Axially Split Chemical Pump
API610 BB1 Horizontal Foot mounted Single Case Single Stage Axially Split Chemical Pump Standards: ISO 13709/API 610(BB1) Operating Parameters :Capacity Q: up to 10000 m³/h ( 44030 gpm ) / Head H: up to 180 m ( 590 ft ) / Pressure...
API610  OH3 Vertical In-Line Overhung Petrochemical Process Pump
API610 OH3 Vertical In-Line Overhung Petrochemical Process Pump Standards :ISO 13709/API 610 (OH3/OH4) Operating Parameters: Capacity Q: up to 600 m³/h ( 2640 gpm ) / Head H: up to 120 m ( 394 ft ) / Pressu...
Synchronous vacuum tank Self-Priming Chemical Process Pump
Synchronous vacuum tank Self-Priming Chemical Process Pump Standards:ISO 13709/API 610 / ISO 5199 Operating Parameters:Capacity Q: up to 400 m³/h ( 1760 gpm ) / Head H: up to 250 m ( 820 ft ) / Pressur...
API610 VS6 Low temperature Vertical Sump Double Case Multistage Pump
API610 VS6 Low temperature Vertical Sump Double Case Multistage Pump Standards :ISO 13709/API 610(VS6) / GB 150 Operating Parameters :Capacity Q: up to 800 m³/h ( 3520 gpm ) / Head H: up to 800 m ( 2625 ft ) / P...
API685  Horizontal Multistage Sealless Magnetic Drive Pump
API685 Horizontal Multistage Sealless Magnetic Drive Pump Standards :API 685 / ISO 15783 Operating Parameters:Capacity Q: up to 160 m³/h ( 700 gpm ) / Head H: up to 350 m ( 1150 ft ) / Pressure P: up ...
供应产品

Same products

danfoss hydraulic motor supplier
danfoss hydraulic motor supplier 卖方: Baoding Dingsen Hydraulic Equipment Sales Co., LTD danfoss hydraulic motor supplier Danfoss Hydraulic Motor – Overview A Danfoss hydra...
rexroth hydraulic motor
rexroth hydraulic motor 卖方: Baoding Dingsen Hydraulic Equipment Sales Co., LTD rexroth hydraulic motor Rexroth Hydraulic Motor – Overview A Rexroth hydraulic moto...
parker hydraulic pump supplier
parker hydraulic pump supplier 卖方: Baoding Dingsen Hydraulic Equipment Sales Co., LTD parker hydraulic pump supplier Parker Hydraulic Pump Supplier – Simple Introduction ...
eaton hydraulic pump remanufactured manufacturer
eaton hydraulic pump remanufactured manufacturer 卖方: Baoding Dingsen Hydraulic Equipment Sales Co., LTD eaton hydraulic pump remanufactured manufacturer Remanufactured Eaton Hydraulic Pumps &ndash...
danfoss hydraulic pump supplier
danfoss hydraulic pump supplier 卖方: Baoding Dingsen Hydraulic Equipment Sales Co., LTD danfoss hydraulic pump supplier Danfoss Hydraulic Pump Supplier – Simple Overview A...