API610 BB1 Horizontal Foot mounted Single Case Single Stage Axially Split Chemical Pump

Standards: ISO 13709/API 610(BB1)
Operating Parameters :Capacity Q: up to 10000 m³/h ( 44030 gpm ) / Head H: up to 180 m ( 590 ft ) / Pressure P: up to 6.3 MPa ( 915 psi ) / Temperature T: -20 - to 160 ℃ ( -4-320 ℉ )
Features: The removal of the upper pump part is easy to maintain(no need to remove inlet and outlet pipings) / The pump shaft runs in oil lubricated rolling bearings with the rotor located by the non drive end bearing which also accommodates any residual axial thrusts from the hydraulically balanced impeller. / The shaft can be reversed to allow the pump to be driven from either side. / Seal chamber accommodates packing and multiple mechanical seal types. / Pump casing flanges according to GB/T9113.1-2010 PN25 - Other flange standards upon request / Coupling with spacer simplifies the access to the bearing frame and the seal chamber (driving end). / Jack screws (motor side) for an easier alignment setting

Other supplier products

	API685 Horizontal Overhung Centerline mounted Sealless Magnetic Drive Pump	Standards : API 685 / ISO 15783 Operating Parameters :Capacity Q: up to 650 m³/h ( 2860 gpm ) / Head H: up to 220 m ( 720 ft ) / Pressure P: u...
	API610 BB3 Horizontal Axially Split Multistage Petrochemical Process Pump	Standards:ISO 13709/API 610(BB3) Operating Parameters:Capacity Q: up to 2400 m³/h ( 10570 gpm ) / Head H: up to 2000 m ( 6560 ft ) / Pressure ...
	Horizontal Overhung Foot mounted Chemical Axial-Flow Pump	Standards:GB/T5656-2008 Operating Parameters:Capacity Q: up to 11000 m³/h ( 48430 gpm ) / Head H: up to 5.5 m ( 18 ft ) / Pressure P: up to 0....
	API610 VS5 Vertical Cantilever Sump Pump	Standards: ISO 13709/API 610(VS5) Operating Parameters: Capacity Q: up to 650 m³/h ( 2860 gpm ) / Head H: up to 80 m ( 262 ft ) / Pressure P: ...
	API685 Horizontal Overhung Close-Coupled Sealless Magnetic Drive Pump	Standards : API 685 / ISO 15783 Operating Parameters :Capacity Q: up to 160 m³/h ( 700 gpm ) / Head H: up to 140 m ( 460 ft ) / Pressure P: u...

供应产品

Same products

	Gr400 Pneumatic Conveying Equipment/Pneumatic High Pressure Conveying Equipment	卖方: Greentech International (Zhangqiu) Co., Ltd	Cast Iron Blow Through Airlock Valve Positive Rotary FeederRotary airlocks displace bulk solids f...
	Slurry Pump Impeller	卖方: Shijiazhuang Industrial Pump Factory Co., Ltd.	Ais a rotating component of athat accelerates fluid outward from the center of rotation, thus tra...
	Vertical foam pump Warman foam pump	卖方: Sunbo Machinery	The SF foam pump is robustly constructed, designed for continuous pumping of highly abrasive and ...
	Horizontal Froth Pump Warman	卖方: Sunbo Machinery	The SAHF Horizontal Froth Slurry Pumpis pumping slurry with obstinate froth, which is equivalent ...
	SPR Vertical Slurry Pump Parts Casing Impeller FPL	卖方: Sunbo Machinery	The SV(R) series Vertival slurry pumpparts is equivalent to warman SP slurry pump parts, which is...