API610 BB5 multi-stage centrifugal pump
API610 BB5 multi-stage centrifugal pump
API 610 Standard Pump
multi-stage centrifugal pump
General:
Type SBT, multi-stage horizontal radial split casing centrifugal pump, is designed in accordance with API610 and VDMA24297A (heavy duty),. Ideal for applications of petroleum and LPG in Petroleum Refineries, Petrochemical and Chemical factories, as well as other inflammable, explosive and toxic liquids without solids but in high temperature and pressure conditions.Thermal feed water pump
Features:
An upgraded new product from its original model transferred from Byron Jackson, USA.
Standard piping design in accordance with API610 and flange drilled to meet GB, DIN and ANSI Standards
Bearing assembly constructed with advanced sliding and axial thrust bearings.
High efficiency and energy-saving hydraulic models utilized for design of liquid contacted components, as a result efficiency increased by3~5% than ordinary oil pumps.
Configuration, dimensions and performance data shall be basically identical with its original type Y pumps.
Pump components and spare parts highly interchangeable.
Pump components materials can be selected from two standard Group II and III, more choices also available upon request for applications in cold and open locations and ocean vessels.
All bearings shall be water cooled.
Model Nomenclature
50 — Suction Dia. (mm)
x4 — Upgraded for the 1sttime
SBT — Centrifugal oil pump
II — Materials Group
35 — Single stage Head (m)
7 — No. of stages
B — Impeller Variation
Piping System
Shaft stuffing box, bearing or pump frame shall be cooled with water according to medium temperature and pressure. Flow of cooling water in each pipe line is recommended within the range of 0.2~0.5 m3/h, and pressure 0.2~0.3Mpa. Sealing flush fluids vary according to operating conditions such as temperature and pressure etc.
Pressure differential between flushing fluid and stuffing box needs to be 0.07~0.1Mpa as a rule. In case of calorific medium, the differential shall be min. 0.175~0.2Mpa higher than the vaporizing pressure. Steam piping, around 0.1Mpa, shall be equipped when medium temperature tends down to crystallizing point.
Applications：
Water supply,Thermal power plant feed water pump/cooling water pump,Pipeling pressure boosting,Refrigeration project
在线联系供应商
Other supplier products
 |
API610 BB4 multistage high pressure pump/BFP pump | API610 BB4 multistage high pressure pump/BFP pump API 610 Standard Pump Design: All parts and components of the SBD series pumps are designed as... |
 |
Sand Gravel Pump | Sand Gravel Pump Product Description TNGSeriesIntroduction:TNGseriesissinglecasinghorizontalslurrypumpandalsonamedasgravelpump,sandpumpand dredg... |
 |
API610 BB2 single stage double suction and between bearings, radial split pump | API610 BB2 single stage double suction and between bearings, radial split pump API 610 Standard Pump API610 BB2 pump China Instruction SOY seri... |
 |
TLNH Sump Slurry Pump | TLNH Sump Slurry Pump Slurry Pump vertical slurry Pump，mining slurry pump，power plant slurry pump Vertical Sump PumpDescription TheTLNHseriespu... |
 |
WQ Submersible Sewage Pump | WQ Submersible Sewage Pump Submersible Pump Large Flow Submersible Pump WQ submersible sewage pump is non-clogging sewage pump developed on the ... |
Same products
 |
Yoyik offer Thrust disk ALD320-20X2 for power station | 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Yoyik offer Thrust disk ALD320-20X2 for power stationMain: hydraulic machinery and components, h... |
 |
China offer Aperture gland ALD320-20X2 for Electric Company | 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China offer Aperture gland ALD320-20X2 for Electric CompanyDongfang Yoyik perennial supply spare... |
 |
Yoyik offer Throttling ring DLD320-20X2 for power generation | 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Yoyik offer Throttling ring DLD320-20X2 for power generationDongfang Yoyik has been focused on m... |
 |
China Supplier Aperture gland DLD320-20X2 for steam turbine | 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China Supplier Aperture gland DLD320-20X2 for steam turbineDeyang YOYIK have power plant profess... |
 |
Fluidic Connections | 卖方: Nanjing Runze Fluid Control Equipment Co.,Ltd | Fluidic Connections Fluidic Connections were manufactured from molds and injection machines by a... |
