TC Seal
TC materials have features of high hardness, strength, abrasion resistance and corrosion resistance. It is known as “Industrial Tooth”. Due to its superior performance, it has been widely used in military industry, aerospace, mechanical processing, metallurgy, oil drilling, electronic communication, architecture and other fields. For example, in pumps, compressors and agitators, TC seals are used as mechanical seals. Good abrasion resistance and high hardness make it suitable for the manufacture of wear-resistant parts with high temperature, friction and corrosion.
According to its chemical composition and usage characteristics, TC can be divided into four categories: tungsten cobalt (YG), tungsten-titanium (YT), tungsten titanium tantalum (YW), and titanium carbide (YN).
Tungsten cobalt (YG) hard alloy is composed of WC and Co. It is suitable for processing brittle materials such as cast iron, nonferrous metals and non-metallic materials.
Stellite (YT) is composed of WC, TiC and Co. Due to the addition of TiC to the alloy, its wear resistance is improved, but the bending strength, grinding performance and thermal conductivity have decreased. Because of its brittleness under low temperature , it is only suitable for high-speed cutting general materials and not for the processing of brittle materials.
Tungsten titanium tantalum (niobium) cobalt (YW) is added to the alloy to increase the high temperature hardness, strength and abrasion resistance through appropriate amount of tantalum carbide or niobium carbide. At the same time, the toughness also is improved with better comprehensive cutting performance. It is mainly used for hard cutting materials and intermittent cutting.
The carbonized titanium base class (YN) is a hard alloy with the hard phase of TiC, nickel and molybdenum. Its advantages are high hardness, anti - bonding ability, anti - crescent wear and anti - oxidation ability. At a temperature of more than 1000 degrees, it can still be machined. It is applicable to the continuous-finishing of alloy steel and quenching steel.
Sealcon mainly selects the materials of YN and YG series to provide customers with high quality TC Sealservice.
|
model |
nickel content（wt%） |
density(g/cm²) |
hardness(HRA) |
bending strength(≥N/mm²) |
|
YN6 |
1800 |
|||
|
YN8 |
2000 |
|||
|
model |
cobalt content（wt%） |
density(g/cm²) |
hardness(HRA) |
bending strength(≥N/mm²) |
|
YG6 |
1800 |
|||
|
YG8 |
1980 |
|||
|
YG12 |
2400 |
|||
|
YG15 |
2480 |
|||
|
YG20 |
2650 |
|||
|
YG25 |
2850 |
|||
Sealconseals hydrocarbon pump mechanical seal,welcome to order it.
在线联系供应商
Other supplier products
 |
Flygt Mechanical Seals FSU-90 | Hangzhou Sealcon Fluid Machinery CO., Ltdwas established in 2011, with Sealcon trademark we specialized in high quality mechanical sealdesign, manu... |
 |
SiC Mechanical Seal | Silicon carbide products are classified into many kinds according to different application environment. It is generally used more mechanically. For... |
 |
Seal Spare Parts Sealing Rings | Seal Spare Parts Sealing Rings Brief Introduction of Sealing Rings The seal ring is a ring seal with the notch, it is placed in the ring groove o... |
 |
Flygt Mechanical Seals FKU-35 | Hangzhou Sealcon Fluid Machinery CO., Ltdwas established in 2011, with Sealcon trademark we specialized in high quality mechanical sealdesign, manu... |
 |
MECHANICAL SEALS FOR PUMP | Mechanical seal for pump is a kind of dynamic seal assembly, which is widely used on the rotating shaft. It is also known as the end seal. Consisti... |
Same products
 |
Zbk03 Series Roots Vacuum Pump/Roots Pump | 卖方: Greentech International (Zhangqiu) Co., Ltd | ZBK series roots vacuum pump is a kind of coarse vacuum acquisition of equipment, it is widely us... |
 |
"Brand Assurance Globe valve GR2-0-KB-G5/30X48 for power generation | 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Brand Assurance Globe valve GR2-0-KB-G5/30X48 for power generation YOYIK is a large number of st... |
 |
Wear Resistance Electric stop valve NKJ961Y-16C for thermal power plant | 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Wear Resistance Electric stop valve NKJ961Y-16C for thermal power plant YOYIK professional produ... |
 |
Brand Assurance Stop valve J61Y-600CL for power generation | 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Brand Assurance Stop valve J61Y-600CL for power generation YOYIK is a large number of steam turb... |
 |
JWSP-1 Oil Sampling Pumps | 卖方: Shenzhen Joinwe Smart Co.,Ltd | JWSP-1 Oil Sampling Pumpis made of imported PA material, 303 stainless steel and 6061 aluminum al... |
