FGD Slurry Recirculation Pump
Product Description
Flue-gas (FGD) is a set of technologies used to remove sulfur dioxide (SO2) from exhaust flue gases of fossil-fuel power plants, and from the emissions of other sulfur oxide emitting processes such as waste incineration.One of its core equipment is the FGD RCPump.The FGD RC pump manufactured by Shijiazhuang Industrial Pump Factory Co., Ltd. is designed with horizontal, single-case, single-stage, single suction, bracket or suspension type structure. All wet-end parts are made of high chrome alloy material GLH-5 and GLH-6(equivalent to A49). According to the technical scheme, by adopting optimized structural design and special modified materials, abrasion and corrosion resistance of the desulphurization pump can be achieved, and the service life of the desulphurization pump is prolonged.
The series medium horizontal desulphurization pumpoffer the special features of being high in efficiency, long in service life, reliable in operation.
The wet parts are made of chrome-nickel alloy with high abrasive and corrosive resistance. The clearance between cryween crystalline is very small; so the material has the ability of inter crystalline crack resistance under corroded by chlorion and high mechanical strength.
The series desulfurization pumps can operate reliably lest the or nonmetallic pumps appear fragment, avulsion and distortion.
The hydraulic loss coefficient is small. The hydraulic efficiency of DT series desulfurization pumps is higher 3% than that of other pumps with the same parameters.
在线联系供应商
Other supplier products
|
|
FGD Slurry Recirculation Pump | Product Description Flue-gas (FGD) is a set of technologies used to remove sulfur dioxide (SO2) from exhaust flue gases of fossil-fuel power pla... |
 |
DG Series Filter Press Feed Pump | Product Description - Single stage, single suction, horizontal centrifugal pump - Wet parts such as casing, impeller, liner plate in anti-abras... |
 |
CH Series Ash-Flushing Pump | Product Description - Single case, - Wet parts such as casing, impeller, liner plate in anti-abrasion high chrome cast iron alloy. - Hydrauli... |
 |
Anti-abrasion Sand Dredger Pump | Product Description As one of , SGB provide sand dredgepumps with high quality. A dredge pump is a horizontal centrifugal pump and is the hear... |
 |
Wear Plates (front & rear liner plate) | Product Description The ofslurry pump is one of the overflow parts of the slurry pump. Due to the transported materials containing various solid... |
Same products
 |
OEM 定制卧式 LB 系列冰箱润滑油齿轮泵 | 卖方: 河北盛辉泵业 | LB 系列冷冻机齿轮泵适用于输送粘度在 200°E （1500mpa.s）以下，无固体颗粒杂质，温度不高于 120° 的各种机械油、透平油及其它性质相近，性能平稳的介质。该设备结... |
 |
OEM 定制卧式 LB 系列冰箱润滑油齿轮泵 | 卖方: 河北盛辉泵业 | LB 系列冷冻机齿轮泵适用于输送粘度在 200°E （1500mpa.s）以下，无固体颗粒杂质，温度不高于 120° 的各种机械油、透平油及其它性质相近，性能平稳的介质。该设备结... |
 |
新款 YHCB 系列可移动卧式圆弧齿轮输油泵 | 卖方: 河北盛辉泵业 | YHCB 系列圆弧齿轮泵专为输送高粘度流体（如油、树脂和化学溶液）而设计。这些泵广泛应用于需要精确可靠地处理流体的行业，包括石化、食品加工和制药行业。它们设计坚固、流量控制精确、易于维护，是需要... |
 |
便携式WCB系列不锈钢高粘度柴油齿轮输送泵 | 卖方: 河北盛辉泵业 | WCB齿轮油泵重量轻，体积小，携带移动方便。结构采用联轴器与介质隔离，联轴器单独润滑，齿轮采用合金钢，采用特殊的热加工工艺，表面硬度可达HRC60以上，耐磨性强，使用寿命长。与其它普通型泵相比，... |
 |
库存 ZYB 系列不锈钢废重油输送高压齿轮泵 | 卖方: 河北盛辉泵业 | ZYB系列废油泵用于抽送温度不高于200℃，粘度不大于150mm2/S含有非金属杂质的重油、柴油、煤焦油及粮油、化工、建材、日化等产品中的杂质。本机采用自密封润滑设计，间隙自动调整结构，零件采用... |
