3NB-1300 Triplex Mud Pumps
3NB-1300 Triplex Mud Pumps
DESCRIPTION:
3NB-1300 Mud Pumpis horizontal triplex single acting piston pump which is suitable to oil, water well, geothermy, CBM, shale gas, coalfield exploration, freezing well as well as well other drilling ,well cementation, workover and other operations in industrial and mining enterprises. It is used for transferring mud, clay gum, mortar and other medium to the borehole. The pump adopts international advanced technology.
Frame
The machine frame is welded with steel plates. The transmission bearing seat and the upper and bottom seat of the crankshaft are made of cast steel. At the bearing seat of the crankshaft, it adopts steel plates and ribbed slabs to reinforce the system in order to get good stiffness and strength.
Crankshaft
It is made of alloy steel cast.
Transmission Gear Pair
The gear pair adopts involute herringbone gears with medium-hard gear surface so that the transmission torque is larger and the systems can operate more stably.
Pinion Shaft
It is made of an alloy steel forge, and a belt pulley may be installed at either side of the transmission shaft.
Crosshead
The crosshead is made by one-piece cast with nodular cast iron, so the crosshead has good resistance to abrasion. The structure of top and bottom guidance is adopted for crossheads in order to regulate the concentricity by adding gaskets at the bottom guidance.
Fluid Cylinder
The cylinder is made of forge alloy steel and adopts a straight-way structure. The hydraulic cylinder has a small size and higher volume efficiency. The conicity at the valve seat holes is 1:6 and there is a step. The hydraulic cylinder is applicable in conditions with high pressure. The cover and flange on the hydraulic cylinder are connected by saw tooth threads. The flange is mounted to the cylinder by bolts so that it is easy to remove and maintain. The cylinder surface is processed by chemical plating in order to increase the resistance to corrosion.
在线联系供应商
Other supplier products
 |
QZNB-2200 horizontal three-cylinder reciprocating single acting mud pump | QZNB-2200 horizontal three-cylinder reciprocating single acting mud pump Specifications： QZNB-2200 mud pumpis a horizontal three- cylinder recipr... |
 |
Truck Mounted Workover Rig Xj150 Xj250 Xj350 | Truck Mounted Workover Rig Xj150 Xj250 Xj350 Product Description The XJ250 truck mounted workover unitadopts single drum draw-works, hydraulic te... |
|
|
3NB-1300 Triplex Mud Pumps | 3NB-1300 Triplex Mud Pumps DESCRIPTION: 3NB-1300 Mud Pumpis horizontal triplex single acting piston pump which is suitable to oil, water well, ge... |
 |
Mud Pump Cylinder Liner F800/F1000/F1300/F1600/F-2200hl | Mud Pump Cylinder Liner F800/F1000/F1300/F1600/F-2200hl Product Description Fluid End: liner, piston rubber, valve body, valve seats, valve rubbe... |
 |
YMC-600 Truck Mounted Drilling Rig | YMC-600 Truck Mounted Drilling Rig Product Description The truckmounted drilling rigsseries from Yingpai Drilling Machinery can cover the drillin... |
Same products
 |
OEM 定制卧式 LB 系列冰箱润滑油齿轮泵 | 卖方: 河北盛辉泵业 | LB 系列冷冻机齿轮泵适用于输送粘度在 200°E （1500mpa.s）以下，无固体颗粒杂质，温度不高于 120° 的各种机械油、透平油及其它性质相近，性能平稳的介质。该设备结... |
 |
OEM 定制卧式 LB 系列冰箱润滑油齿轮泵 | 卖方: 河北盛辉泵业 | LB 系列冷冻机齿轮泵适用于输送粘度在 200°E （1500mpa.s）以下，无固体颗粒杂质，温度不高于 120° 的各种机械油、透平油及其它性质相近，性能平稳的介质。该设备结... |
 |
新款 YHCB 系列可移动卧式圆弧齿轮输油泵 | 卖方: 河北盛辉泵业 | YHCB 系列圆弧齿轮泵专为输送高粘度流体（如油、树脂和化学溶液）而设计。这些泵广泛应用于需要精确可靠地处理流体的行业，包括石化、食品加工和制药行业。它们设计坚固、流量控制精确、易于维护，是需要... |
 |
便携式WCB系列不锈钢高粘度柴油齿轮输送泵 | 卖方: 河北盛辉泵业 | WCB齿轮油泵重量轻，体积小，携带移动方便。结构采用联轴器与介质隔离，联轴器单独润滑，齿轮采用合金钢，采用特殊的热加工工艺，表面硬度可达HRC60以上，耐磨性强，使用寿命长。与其它普通型泵相比，... |
 |
库存 ZYB 系列不锈钢废重油输送高压齿轮泵 | 卖方: 河北盛辉泵业 | ZYB系列废油泵用于抽送温度不高于200℃，粘度不大于150mm2/S含有非金属杂质的重油、柴油、煤焦油及粮油、化工、建材、日化等产品中的杂质。本机采用自密封润滑设计，间隙自动调整结构，零件采用... |
