LEFOO HIGH ACCURACY PRESSURE TRANSMITTER

High Accuracy Pressure Transmitter LFT2010

High accuracy pressure transmitter applies a silicon strain diaphragm embedded in an oil-filled steel housing and the repeatable & low hysteresis properties of silicon are exploited by the difference normalization digital amplifier to provide precision optimized measurement results around the ambient temperature range. A four Wheatstone bridge is diffused into a silicon wafer and then micro-machined to exacting standards to produce a pressure sensor.

APPLICATION OF LEFOO HIGH ACCURACY PRESSURE TRANSMITTERS

In Lefoo, one of the top differential pressure transmittersuppliers, Through a high precision and long-term stability, these high accuracy pressure transducersand transmitters are particularly suited for applications in flow or in any facility where high-precision measurement is required. They are used as pressure measuring devices in modern automated industries for higher energy efficiency and longer equipment lifespan. These characteristics make it a valuable tool in metrology, hydrology, oceanography, and industries.

LEFOO HIGH ACCURACY PRESSURE TRANSMITTER

Industrial High Precision Pressure Transmitter

Pressure Type: Gauge / Absolute

Pressure Range: 0~7MPa / 0~4MPa

Pressure Accuracy: 0.25%FSO / 0.1% FSO

Output: 4~20ma/ 0~5V/ 0~10V RS485

LEFOO HIGH PRECISION PRESSURE TRANSMITTER HAS THE APPLICATIONS AS BELOW

Testing technology

Calibration technology

Geoscience/hydrology

High accuracy pressure sensing in original equipment manufacturing (OEMs)

Aerospace / Military

Laboratories and maintenance shops

Leak and burst applications

Wind tunnels

Level monitoring

OEM / Test Bench

Aviation

FACTORS IMPACT ON THE HIGH PRECISION PRESSURE TRANSMITTERS ACCURACY

Accoring to lefoo, There are many factors that influence the choice of a sensing device in a certain application. Gauge pressure sensor, absolute or differential, transducer or transmitter, measurement range, fitting style/size, and absolute maximum ratings such as burst pressure are among the most important.

FACTORS AFFECTING HIGH PRECISION PRESSURE TRANSMITTERS ACCURACY

Making the right choice can then be guided by considering factors that affect accuracy. The major high accuracy pressure transducers characteristics that influence accuracy are temperature coefficients, temperature hysteresis, pressure hysteresis, and non-linearity. Applicable temperature coefficients include temperature-related changes to zero offset, sensitivity, and measurement span.

TEMPERATURE ERROR OVER 85°C OF HIGH ACCURACY PRESSURE TRANSMITTERS

The LFT2010 high accuracy pressure transmitter for a high-temperature application over 85 °C will cause permanent damage to accuracy. The ideal working temperature is within the range of -10°C to 70°C. For example, there are some common high precision pressure sensoron the market with 0.5% accuracy( not LEFOO products). The 0.5% FS accuracy does not include the permanent temperature error which is an additional 0.02%X3=0.06% per degree per second.Celsius.The extremely high temperature will ruin the accuracy and the sensor in seconds.

To reduce this additional temperature error and assuming you have the ability to calibrate the sensor when the temperature is between 80 and 90°C, LEFOO pressure control treats the error from room temp up to 90℃ as a calibration shift since you are only interested in optimizing performance between 80 and 90°C. So the easiest way to reduce the temperature error is to check the output signal at zero and full-scale pressure when the temperature is at its mid-point 85°C. If you are not able to set full-scale pressure, an even simpler method is to just check the zero shift at 85°C since most of the thermal error is typically contributed by the thermal zero shift.

LEFOO CUSTOM HIGH ACCURACY PRESSURE TRANSMITTERS

LEFOO offer ODM and OEM pressure transducers that have excellent long-term stability, linearity, repeatability. LEFOO can also supply custom-configured banks of transducers in calibration test carts, racks, or benches to fulfill a specific need for flexibility in pressure range and temperature compensation.

The custom systems can contain a variety of components including controlling software, pressure controllers, pressure switch and any customer-specified ancillary equipment necessary.

Other supplier products

	LEFOO STEPPER MOTOR PERISTALTIC PUMP	LEFOO STEPPER MOTOR PERISTALTIC PUMP Peristaltic pumps are very popular fluid transfer equipment with a wide range of applications. Peristaltic pu...
	Oil-filled Diffusion Silicon Pressure Transmitter LFT2800	LEFOO LFT2800 pressure transmitter is widely used in the measurement of fluid medium pressure in test systems such as fire protection, water treatm...
	DIFFERENTIAL PRESSURE PRODUCTS	LEFOO differential pressure transmitter at the pressure ranges of 0～±100Pa, 0～±1,000Pa, and 0～±10,000Pa.LCD digital display 25...
	RO Diaphragm Water Booster Pump 300 GPD	LEFOO was founded in 1995, over the past 25 years LEFOO has grown to one of theprofessional peristaltic pump manufacturersthat has 3 subsidiaries w...
	LEFOO DIGITAL PRESSURE SWITCH	Pressure Range: -100~100kpa Pressure Accuracy: 1%FSO Work Temperature: 0~50 °C Measure media: Non-corrosive dry gas Output: digital 4~20ma/...

供应产品

Same products

	OEM 定制卧式 LB 系列冰箱润滑油齿轮泵	卖方: 河北盛辉泵业	LB 系列冷冻机齿轮泵适用于输送粘度在 200°E （1500mpa.s）以下，无固体颗粒杂质，温度不高于 120° 的各种机械油、透平油及其它性质相近，性能平稳的介质。该设备结...
	OEM 定制卧式 LB 系列冰箱润滑油齿轮泵	卖方: 河北盛辉泵业	LB 系列冷冻机齿轮泵适用于输送粘度在 200°E （1500mpa.s）以下，无固体颗粒杂质，温度不高于 120° 的各种机械油、透平油及其它性质相近，性能平稳的介质。该设备结...
	新款 YHCB 系列可移动卧式圆弧齿轮输油泵	卖方: 河北盛辉泵业	YHCB 系列圆弧齿轮泵专为输送高粘度流体（如油、树脂和化学溶液）而设计。这些泵广泛应用于需要精确可靠地处理流体的行业，包括石化、食品加工和制药行业。它们设计坚固、流量控制精确、易于维护，是需要...
	便携式WCB系列不锈钢高粘度柴油齿轮输送泵	卖方: 河北盛辉泵业	WCB齿轮油泵重量轻，体积小，携带移动方便。结构采用联轴器与介质隔离，联轴器单独润滑，齿轮采用合金钢，采用特殊的热加工工艺，表面硬度可达HRC60以上，耐磨性强，使用寿命长。与其它普通型泵相比，...
	库存 ZYB 系列不锈钢废重油输送高压齿轮泵	卖方: 河北盛辉泵业	ZYB系列废油泵用于抽送温度不高于200℃，粘度不大于150mm2/S含有非金属杂质的重油、柴油、煤焦油及粮油、化工、建材、日化等产品中的杂质。本机采用自密封润滑设计，间隙自动调整结构，零件采用...