.

COMMON Valve Seat Coating MATERIALS

COMMON Valve Seat Coating MATERIALS
  • COMMON Valve Seat Coating MATERIALS
供应商: Suzhou Kaitianfu Machinery Co., Ltd

供应产品
在线联系供应商

COMMON Valve Seat CoatingMATERIALS

Valve Seat: The detachable surface parts in valve are used to support the valve spool in the fully closed position and constitute a sealed part. Generally, valve seat diameter is the maximum flow diameter of the valve.

PRODUCT PARAMETERS FOR OUR high performance valve seat

This part can be illustrated by a table shown below:

name

Description

Chemical composition

Max thickness

Hardness

Bond strength

Porosity

Limit temperature

Costing

characterlzation

mm

MPa

%

℃

WC-CoCr

WC86/Co10/Cr4

Co：9-11

Cr：3.5-4.5

C：3.5-4.5

W: Bal

1

1100-1500

>75

<1%

482
  • Good abrasive resistance at low temperature
  • Compared with WC-Co, its oxidation resistance

and corrosion resistance are improved.

  • The coating is compact and hard

WC-Co

WC88/Co12

Co：11-13

C：3.6-5.5

W：Bal

2

1050-1200

>75

<1%

454
  • Good abrasive resistance at low temperature.
  • Limited oxidation resistance and corrosion
  • The coating is compact and hard.

WC-Co

WC83/Co17

Co：16-18

C：4.8-5.5

W: Bal

2

950-1100

>75

<1%

454
  • Good abrasive resistance at low temperature.
  • Compared with WC-12Co, its abrasive resistance

is poor, but toughness, impact strength and ductility are better.

  • The coating is compact and hard.

Cr3C2-NiCr

75Cr3C2/25NiCr

Ni：16-21C：9-11

Cr：11

B：2.2

Si：4

Fe：2.7

C：0.4

Ni：Bal

1

750-900

>75

<1.5%

871
  • Good abrasive and sliding abrasive performance

of abrasive-resistant materials at high temperatures.

  • Good corrosion resistance.


在线联系供应商

至: Suzhou Kaitianfu Machinery Co., Ltd
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

VALVE GATE COATING INTRODUCTION
 VALVE GATE COATING INTRODUCTION VALVE GATE COATINGINTRODUCTION tungsten carbide valve gate Valve Gate: The core parts of flat gate valves used in the petrochemical industry requir...
Tungsten Carbide Valve Seats PRODUCT DATA
 Tungsten Carbide Valve Seats PRODUCT DATA Tungsten Carbide Valve SeatsPRODUCT DATA Valve Seat: The detachable surface parts in valve are used to support the valve spool in the fully closed ...
COMMON Valve Seat Coating MATERIALS
 COMMON Valve Seat Coating MATERIALS COMMON Valve Seat CoatingMATERIALS Valve Seat: The detachable surface parts in valve are used to support the valve spool in the fully closed positi...
Tungsten Carbide Valve Seats FAQ FOR CLIENTS
 Tungsten Carbide Valve Seats FAQ FOR CLIENTS Tungsten Carbide Valve SeatsFAQ FOR CLIENTS Custom Valve Seats Valve Seat: The detachable surface parts in valve are used to support the valve spoo...
INTRODUCTION TO HVOF Coating
 INTRODUCTION TO HVOF Coating INTRODUCTION TO HVOF Coating custom valve gates Valve Gate: The core parts of flat gate valves used in the petrochemical industry require high pres...
供应产品

Same products

Class 300 Valve
 Class 300 Valve 卖方: GangYe Group Co.,Ltd. Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing...
Class 3000 Industrial Valve
 Class 3000 Industrial Valve 卖方: GangYe Group Co.,Ltd. Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-...
Class 2500 Industrial Valve
 Class 2500 Industrial Valve 卖方: GangYe Group Co.,Ltd. Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ...
Class 150 Valve
 Class 150 Valve 卖方: GangYe Group Co.,Ltd. globe valve class 150is a pressure rating designation defined by standards organizations, such as...
Class 1500 Industrial Valve
 Class 1500 Industrial Valve 卖方: GangYe Group Co.,Ltd. A class 1500 valve made of 316 stainless steel, for instance, can sustain 248 bar of pressure at ...