LN85 Series Cage Guided Globe Control Valve
LN85 Series Cage Guided Globe Control Valve
LN85series are LN8 series pressure balance control valvesproducts, one of the three basic has separable sleeve, large guide structure, adopt the molding spring, energy storage pressure balance ring. Has a good dynamic stability, high control precision, allow the pressure difference is big, the operating force is small, large flow capacity, suitable for a wider temperature range of conditions, large pressure difference, under the action of alternating stress control.
Cage Guided Globe Control ValveDescription
Long life
According to the needs of the working conditions, different materials and surface hardening treatment can easily be chosen to meet the requirements of each function module of trim to improve its performance of the corrosion, cavitation and erosion resistant, lengthen service life.
- Cage guided globe valvebody
The body of LN8 series control valves consists of two passages from upper and lower, forming a shape like letter "S". The design of an elliptical section reduces the flow resistance and turbulent flow to keep the flow fluent. The flap in the middle of upper passage can reduce the eddy flow and increase the flow capacity.
- Globe valveActuator
The standard mate of LN8 series Globe valveis AM8 Multi-spring pneumatic diaphragm actuator, which can be used in many conditions with the features of strong output force, high reliability, long lifespan and extensive application. The output force changes with the number of springs. The high stress resistant diaphragm, bearing maximum pressure of 0.5 MPa air supply, gives control valve a reliable shutoff. This type of actuator has a long life cycle with more than 1 million times.
High Pressure Globe Control ValvePARAMETERS
|
Nominal Size |
DN40 ~ DN400 |
|
Pressure Rating |
PN16/25/40/63/100;CL150(PN20)/300(PN50)/600(PN110) |
|
Operateing Temperature |
-80℃~ 260℃ |
|
Characteristics |
Equal percentage, linear, quickly open |
|
Rangeability |
50:1 |
|
Seat Leakage Class |
ANSI B16.104: IV、V、VI |
|
Body Material |
WCB/WCC/LCB/LCC;WC6/WC9;CF8/CF8M;4A/5A etc. |
|
Trim Material |
630/316/316+ST/316nitriding/316+Ni60/316+WC etc. |
|
Seal Material |
PTFE+ graphite v-shaped packing, flexible graphite ring packing, graphite +PTFE braided packing etc. |
在线联系供应商
Other supplier products
 |
SN51/52 Series Soft Seal O-type Ball Valve | SN51/52 Series Soft Seal O-type Ball Valve Sn51/52 series soft seal O type ball valveis a full straight through ball valve, the fluid pressure drop... |
 |
v notch ball valve | v notch ball valve V Notch Ball Valves Our V-Ball, V-Port and are made of high-quality materials. v notch ball valve, the "V" notch is a uniq... |
 |
LN81 Series Single Seat Globe Control Valve | LN81 Series Single Seat Globe Control Valve LN81 series are single-seat LN8 series pressure imbalance structure products, one of two basic guide pl... |
 |
electromagnetic flowmeter | electromagnetic flowmeter SFE900 Electromagnetic flowmeter is a product with high precision and high reliability after continuous upgrading a... |
 |
LN82W Series Bellows Globe Control Valve | LN82W Series Bellows Globe Control Valve LN81W / 82 series bellows single-seat control valve, based on LN81/82 series valve single-seat non pressur... |
