LN85 Series Cage Guided Globe Control Valve
LN85 Series Cage Guided Globe Control Valve
LN85series are LN8 series pressure balance control valvesproducts, one of the three basic has separable sleeve, large guide structure, adopt the molding spring, energy storage pressure balance ring. Has a good dynamic stability, high control precision, allow the pressure difference is big, the operating force is small, large flow capacity, suitable for a wider temperature range of conditions, large pressure difference, under the action of alternating stress control.
Cage Guided Globe Control ValveDescription
Long life
According to the needs of the working conditions, different materials and surface hardening treatment can easily be chosen to meet the requirements of each function module of trim to improve its performance of the corrosion, cavitation and erosion resistant, lengthen service life.
- Cage guided globe valvebody
The body of LN8 series control valves consists of two passages from upper and lower, forming a shape like letter "S". The design of an elliptical section reduces the flow resistance and turbulent flow to keep the flow fluent. The flap in the middle of upper passage can reduce the eddy flow and increase the flow capacity.
- Globe valveActuator
The standard mate of LN8 series Globe valveis AM8 Multi-spring pneumatic diaphragm actuator, which can be used in many conditions with the features of strong output force, high reliability, long lifespan and extensive application. The output force changes with the number of springs. The high stress resistant diaphragm, bearing maximum pressure of 0.5 MPa air supply, gives control valve a reliable shutoff. This type of actuator has a long life cycle with more than 1 million times.
High Pressure Globe Control ValvePARAMETERS
Nominal Size |
DN40 ~ DN400 |
Pressure Rating |
PN16/25/40/63/100;CL150(PN20)/300(PN50)/600(PN110) |
Operateing Temperature |
-80℃~ 260℃ |
Characteristics |
Equal percentage, linear, quickly open |
Rangeability |
50:1 |
Seat Leakage Class |
ANSI B16.104: IV、V、VI |
Body Material |
WCB/WCC/LCB/LCC;WC6/WC9;CF8/CF8M;4A/5A etc. |
Trim Material |
630/316/316+ST/316nitriding/316+Ni60/316+WC etc. |
Seal Material |
PTFE+ graphite v-shaped packing, flexible graphite ring packing, graphite +PTFE braided packing etc. |
Send product request
Other supplier products
BN1101F Plastic Lined Butterfly Valve | BN1101F Plastic Lined Butterfly Valve BN1101F series Plastic Lined Butterfly Valvehave both the temperature resistance of hard liner and the sealin... | |
CN81 Series Eccentric Rotary Control Valve | CN81 Series Eccentric Rotary Control Valve CN8 series eccentric rotating valveis a valve core is on the surface of the spherical cap eccentric Angl... | |
LN82W Series Bellows Globe Control Valve | LN82W Series Bellows Globe Control Valve LN81W / 82 series bellows single-seat control valve, based on LN81/82 series valve single-seat non pressur... | |
SN51/52 Series Soft Seal O-type Ball Valve | SN51/52 Series Soft Seal O-type Ball Valve Sn51/52 series soft seal O type ball valveis a full straight through ball valve, the fluid pressure drop... | |
LN87 Cage guided regulating valve | LN87 Cage guided regulating valve High Precision Globe Control Valve Globe valveare designed strictly on the basis of the IEC standard. They are th... |
Same products
Class 300 Valve | Seller: GangYe Group Co.,Ltd. | Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing... | |
Class 3000 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-... | |
Class 2500 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ... | |
Class 150 Valve | Seller: GangYe Group Co.,Ltd. | globe valve class 150is a pressure rating designation defined by standards organizations, such as... | |
Class 1500 Industrial Valve | Seller: GangYe Group Co.,Ltd. | A class 1500 valve made of 316 stainless steel, for instance, can sustain 248 bar of pressure at ... |