Cryogenic Gate Valve
Description of Cryogenic ButterflyValve:
As the cryogenic butterfly valve manufacturers, the main material of ZECO cryogenic gate valve is selected. Considering from the metallographic aspect, in addition to austenitic steel, copper and aluminum with face centered cubic lattice, general steel will appear low temperature brittleness at low temperature, thus reducing the strength and service life of the valve. When the temperature is higher than -100℃, choose ferritic steel; when the temperature is lower than -100℃, choose austenitic steel; low pressure and small diameter valves can choose copper and aluminum and other materials. Stem and fastener is selected, when the temperature is higher than -100℃, stem and bolt materials adopt Ni, Cr-Mo alloy steel, through appropriate heat treatment, to improve tensile strength and prevent thread bite. Austenitic stainless steel is used when the temperature is higher than -100℃. Low hardness of 18-8 acid resistant steel will cause mutual abrasion between stem and packing, causing leakage of packing.Therefore, the stem surface must be hard chrome plated (thickness 0.04-0.06mm), or nitride and nickel-phosphorous plated to improve surface hardness.In order to prevent nuts and bolts from biting to death, the nuts are generally made of Mo steel or Ni steel and coated with molybdenum disulfide on the surface of the threads.
Features of Cryogenic Gate Valve:
Material of Cryogenic Gate Valve:
|
No |
Part |
Material |
|
1 |
Body |
ASTM A350 LF3 |
|
2 |
Seat Ring |
ASTM A276 410 + STL |
|
3 |
Wedge |
ASTM A350 LF3 + STL |
|
4 |
Stem |
ASTM A182 F6 |
|
5 |
Bonnet Gasket |
Graphite + SS316 |
|
6 |
Bonnet Bolt |
ASTM A193 B16 |
|
7 |
Bonnet Nut |
ASTM A194 4 |
|
8 |
Bonnet |
ASTM A350 LF3 |
|
9 |
Backseat |
ASTM A182 410 |
|
10 |
Stem Packing |
Reinforced Graphite |
|
11 |
Handwheel |
KTH330-08 |
What We Offer?
As a industrial valve supplier, ZECO always adhere to exceed customer expectations, to provide customers with more value-added
services and products as the ultimate goal.
在线联系供应商
Other supplier products
 |
Resilient Gate Valve for Underground 1025 | Most of the 2.5 inch butterfly valveused in the walkway begin to be made of ductile cast iron, as copper or stainless steel becomes much more expen... |
 |
Strainer & Dirt Separator | Strainers, dirt separatorsand backflow preventers are designed to prevent impurities from entering the specified pipe section. Comparing these thre... |
 |
Gate Valve | The resilient seatedgate valveof ZhengFeng is widely used and reliable in the water supply and drainage system of water supply company, sewage comp... |
 |
Backflow Preventers | Basic information This bronze adjustable dynamic flow balancingvalve is required to maintain the flow of these pipes or end equipment at all times ... |
 |
2pc Ball Valve | Description of 2pc Ball Valve: ZECO Ball valve is the same to the ordinary that trim spring with the stem to reach the purpose of open/ close, it i... |
Same products
 |
Combination angle valve | 卖方: Zhejiang Huaqi Information Technology Co., LTD | Meet our Brass Angle Ball Valve, a versatile and reliable solution for controlling fluid flow in ... |
 |
Multifunctional hydraulic control valve | 卖方: FLUID TECH PIPING SYSTEMS (TIANJIN) CO.,LTD | Features: Size: 2"-24”(DN50-DN600) Material: Ductile iron ASTM A536, 65-45-12 Dimension:... |
 |
Fire Protection Grooved Butterfly Valve | 卖方: FLUID TECH PIPING SYSTEMS (TIANJIN) CO.,LTD | Features: Code：D81X4 Size: 2"-12”(DN50-DN300) Material: Ductile iron ASTM A536, 65-45-12... |
 |
Dry Ash Gate Valve | 卖方: China Valve Industry Co., Ltd. | The dry ash gate valve is designed for both inlet and outlet pipelines. It features... |
 |
China factory High temperature double head bolt 2""-8UN Steam Turbine RSV N for power station | 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China factory High temperature double head bolt 2""-8UN Steam Turbine RSV N for power stationOur... |
