45° Elbow Pickled Buttweld
Stainless steel elbow is mainly distinguished on different materials from the carbon steel elbow, and the chemical composition contained in the elbow is not rust for a long time, and it will not be corroded.
45° Elbow Pickled Seamless/Welded VS 90°
Both 45 ° elbow pickled seamless/weld and 90 ° elbow manufacture standard can be ASME B16.9, ASME B16.28, MSS SP-43, MSS SP-75 JIS B2311, DIN2605, GOST 17375, ISO
2 Wall Thickness (Similarity):
Both 45 ° elbow pickled seamless/weld and 90 ° elbow wall thickness can be SCH10/10S,SCH20/20S,STD,SCH40/40S,XS,SCH80,XXS ETC.(for ANSI),SGP(for JIS)
Size: 1/2"-48"(DN15-DN1200), or even bigger
Finishing: Polished, Pickled.
Connection type: Butt Welding.
Both 45°elbow and 90°elbow are welded to pipes and can change the flow direction.
45° Elbow Pickled Buttweld FAQs
Elbow is a key part of a pressure piping system used to change the fluid flow direction. The 45-degree pipe elbow is used to connect pipes at a 45° pipe angle.
- 45 Degree Elbow?
The back-arc length of 45 degree elbow equals (center to end diamater+1/2*OD)*π*1/4
For more information about wcb gate valvesand valves, please feel free to contact us!
在线联系供应商
Other supplier products
 |
Stub End Machined Buttweld | Stainless steel stub end is a punching method for turning over the outer edge of the rough forgings or semi-finished product. the edge is turned in... |
 |
ZMIO-A1 O.S.&Y. Flanged Gate Valves | The rising gate valve is also referred to as a lifting stem gate valve, which is up and down together during the opening and closing process. The h... |
 |
ZHRIB-D1 DIN 3202 BALL TYPE Check Valves Flanged End | The flanged ball check valve is used as a flap with a rubber foreskin ball. Under the action of the medium, it can be rolled up and down on the int... |
 |
Ductile Iron Foot Valve Flange End | A ductile iron foot valveis a kind of energy-saving valve. It is generally installed at the bottom end of the underwater suction pipe of the water ... |
 |
3PCS Ball Valve With Mounting Pad | The high-mounting pad three-piece internal threaded ball valve is composed of a three-part structure, which is mainly composed of the middle valve ... |
