#graphiteelectrode #uhp750 #uhp650 #uhp700 #electrodes #steelmaking #electricarcfurnace #steelmills #steelplants #steelmakers #metalscraps #NACHI #heatingelements #quality #china #carbon
DESCRIPTION
UHP graphite electrode is used for the recycling of steel in the electric arc furnace industry. Its main ingredient is high-value needle coke which is made from either petroleum or coal tar. Graphite electrodes are finished with a cylinder shape and machined with threaded areas at each end. In this way, the graphite electrodes can be assembled into an electrode column using electrode nipple.
In order to meet the requirement of higher work efficiency and lower total cost, large capacity ultra-high power arc furnaces are becoming more and more popular. Because of this, UHP graphite electrodes with diameters of over 500 mm will dominate market.
FEATURE
Withstand large currents, high discharge rate.
Good dimension stability, not easy to deform.
Resistant to cracking & spalling.
High resistance to oxidation and thermal shock.
High mechanical strength, low electrical resistance.
High machining accuracy, good surface finishing.
APPLICATION
Graphite electrodes are widely used for production of alloy steels, metal and other nonmetallic materials, etc.
DC electric arc furnace.
AC electric arc furnace.
Submerged arc furnace.
Ladle furnace.
SPECIFICATION
Table 1: Technical Specification of UHP Graphite Electrode
| Dia. | Resistance | Density | FlexureStrength | ElasticModulus | AshContent | CTE | CurrentLoad | CurrentDensity |
| (inch) | (≤,µΩ·m) | (≥,g/cm3) | (≥,MPa) | (≤,GPa) | (≤,%) | (100°C–600°C) | (A) | (A/cm2) |
| (≤,10-6/°C) | ||||||||
| 10 | 5.2 | 1.67 | 10.5 | 14 | 0.3 | 1.5 | 8100–12200 | 20–30 |
| 12 | 5.2 | 1.70 | 10.5 | 14 | 0.3 | 1.5 | 15000–22000 | 20–30 |
| 14 | 5.2 | 1.70 | 10.5 | 14 | 0.3 | 1.5 | 20000–30000 | 20–30 |
| 16 | 5.2 | 1.70 | 10.5 | 14 | 0.3 | 1.5 | 25000–40000 | 19–30 |
| 18 | 5.2 | 1.70 | 10.5 | 14 | 0.3 | 1.5 | 32000–45000 | 19–27 |
| 20 | 5.2 | 1.70 | 11 | 14 | 0.3 | 1.4 | 38000–55000 | 18–27 |
| 22 | 5.2 | 1.72 | 11 | 14 | 0.3 | 1.4 | 42000–66000 | 17–26 |
| 24 | 4.8 | 1.72 | 11 | 14 | 0.3 | 1.4 | 49000–76000 | 17–26 |
Table 2: Graphite Electrode Size & Tolerance
| Diameter(mm) | Length(mm) | ||||||
| NominalDiameter | ActualDiameter | NominalLength | Tolerance | ShortLength | |||
| (inch) | (mm) | (max.) | (min.) | (roughspot) | |||
| 10 | 250 | 256 | 251 | 248 | 1600/1800 | ±100 | -275 |
| 12 | 300 | 307 | 302 | 299 | 1600/1800 | ||
| 14 | 350 | 357 | 352 | 349 | 1600/1800 | ||
| 16 | 400 | 409 | 403 | 400 | 1600/1800/2000/2200 | ||
| 18 | 450 | 460 | 454 | 451 | 1600/1800/2000/2200 | ||
| 20 | 500 | 511 | 505 | 502 | 1800/2000/2200/2400 | ||
| 22 | 550 | 562 | 556 | 553 | 1800/2000/2200/2400 | ||
| 24 | 600 | 613 | 607 | 604 | 2000/2200/2400/2700 | ||
SURFACE QUALITY
There should be less than two defects or holes on the electrode surface, the maximum size of which is mentioned in the below chart.
There should be no transverse crack on the electrode surface. For the longitudinal crack, the length should be less than 5% of the electrode circumference and the width should be 0.3 to 1.0 mm.
The width of black area on electrode surface should be less than 1/10 of the electrode circumference and the length should be less than 1/3 of the electrode.
| SpecificationDefectDimension | NominalDiameterofGraphiteElectrode(mm) | |
| 300–400 | 450–600 | |
| Diameter(mm) | 20–40 | 30–50 |
| (<20mmshouldbenegligible) | (<30mmshouldbenegligible) | |
| Depth(mm) | 5–10 | 10–15 |
| (<5mmshouldbenegligible) | (<10mmshouldbenegligible) | |
在线联系供应商
Other supplier products
供应产品
Same products
 |
超高功率石墨电极 | 卖方: 邯郸市鸿冠新材料科技有限公司 | 超高功率石墨电极主要用于电炉冶炼、半导体材料制备、硅材料热处理等高温工艺中的电极部分。它由高品质的石墨材料制成，具有优异的导电性、稳定性和耐高温性能。 超高石墨电极的主要参数包括直径、长度... |
 |
重庆森仟烨新材料科技股份有限公司 | 卖方: 833804 | 石墨材料及制品研发、生产、销售;炭电极及制品研发、生产、销售;石墨烯、锂电池负极材料研发、生产、销售;炭纤维材料研发、生产、销售;货物进出口业务。(依法须经批准的项目，经相关部门批准后方可开展经... |
 |
重庆森仟烨新材料科技股份有限公司 | 卖方: 833804 | 石墨材料及制品研发、生产、销售;炭电极及制品研发、生产、销售;石墨烯、锂电池负极材料研发、生产、销售;炭纤维材料研发、生产、销售;货物进出口业务。(依法须经批准的项目，经相关部门批准后方可开展经... |
 |
CUSTOM EXTRUDED GRAPHITE BLOCK | 卖方: Pingdingshan Wanhui Graphite Co., LTD | Extruded graphite block, mainly used for molten iron with casting molds and graphite crucible fur... |
 |
CUSTOM GRAPHITE EDM BLOCKS | 卖方: Pingdingshan Wanhui Graphite Co., LTD | EDM graphite blocksare becoming more and more popular among our customers. EDM graphite is a new ... |
