.

#graphiteelectrode #uhp750 #uhp650 #uhp700 #electrodes #steelmaking #electricarcfurnace #steelmills #steelplants #steelmakers #metalscraps #NACHI #heatingelements #quality #china #carbon

DESCRIPTION

UHP graphite electrode is used for the recycling of steel in the electric arc furnace industry. Its main ingredient is high-value needle coke which is made from either petroleum or coal tar. Graphite electrodes are finished with a cylinder shape and machined with threaded areas at each end. In this way, the graphite electrodes can be assembled into an electrode column using electrode nipple.

In order to meet the requirement of higher work efficiency and lower total cost, large capacity ultra-high power arc furnaces are becoming more and more popular. Because of this, UHP graphite electrodes with diameters of over 500 mm will dominate market.

FEATURE

Withstand large currents, high discharge rate.
Good dimension stability, not easy to deform.
Resistant to cracking & spalling.
High resistance to oxidation and thermal shock.
High mechanical strength, low electrical resistance.
High machining accuracy, good surface finishing.

APPLICATION

Graphite electrodes are widely used for production of alloy steels, metal and other nonmetallic materials, etc.
DC electric arc furnace.
AC electric arc furnace.
Submerged arc furnace.
Ladle furnace.

SPECIFICATION

Table 1: Technical Specification of UHP Graphite Electrode

Dia. Resistance Density FlexureStrength ElasticModulus AshContent CTE CurrentLoad CurrentDensity
(inch) (≤,µΩ·m) (≥,g/cm3) (≥,MPa) (≤,GPa) (≤,%) (100°C–600°C) (A) (A/cm2)
(≤,10-6/°C)
10 5.2 1.67 10.5 14 0.3 1.5 8100–12200 20–30
12 5.2 1.70 10.5 14 0.3 1.5 15000–22000 20–30
14 5.2 1.70 10.5 14 0.3 1.5 20000–30000 20–30
16 5.2 1.70 10.5 14 0.3 1.5 25000–40000 19–30
18 5.2 1.70 10.5 14 0.3 1.5 32000–45000 19–27
20 5.2 1.70 11 14 0.3 1.4 38000–55000 18–27
22 5.2 1.72 11 14 0.3 1.4 42000–66000 17–26
24 4.8 1.72 11 14 0.3 1.4 49000–76000 17–26

Table 2: Graphite Electrode Size & Tolerance

Diameter(mm) Length(mm)
NominalDiameter ActualDiameter NominalLength Tolerance ShortLength
(inch) (mm) (max.) (min.) (roughspot)
10 250 256 251 248 1600/1800 ±100 -275
12 300 307 302 299 1600/1800
14 350 357 352 349 1600/1800
16 400 409 403 400 1600/1800/2000/2200
18 450 460 454 451 1600/1800/2000/2200
20 500 511 505 502 1800/2000/2200/2400
22 550 562 556 553 1800/2000/2200/2400
24 600 613 607 604 2000/2200/2400/2700

SURFACE QUALITY

There should be less than two defects or holes on the electrode surface, the maximum size of which is mentioned in the below chart.
There should be no transverse crack on the electrode surface. For the longitudinal crack, the length should be less than 5% of the electrode circumference and the width should be 0.3 to 1.0 mm.
The width of black area on electrode surface should be less than 1/10 of the electrode circumference and the length should be less than 1/3 of the electrode.

SpecificationDefectDimension NominalDiameterofGraphiteElectrode(mm)
300–400 450–600
Diameter(mm) 20–40 30–50
(<20mmshouldbenegligible) (<30mmshouldbenegligible)
Depth(mm) 5–10 10–15
(<5mmshouldbenegligible) (<10mmshouldbenegligible)


在线联系供应商

至: Ao hui carbon company
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

#graphiteelectrode #uhp750 #uhp650 #uhp700 #electrodes #steelmaking #electricarcfurnace #steelmills #steelplants #steelmakers #metalscraps #NACHI #heatingelements #quality #china #carbon
#graphiteelectrode #uhp750 #uhp650 #uhp700 #electrodes #steelmaking #electricarcfurnace #steelmills #steelplants #steelmakers #metalscraps #NACHI #heatingelements #quality #china #carbon
#graphiteelectrode #uhp750 #uhp650 #uhp700 #electrodes #steelmaking #electricarcfurnace #steelmills #steelplants #steelmakers #metalscraps #NACHI #heatingelements #quality #china #carbon
#graphiteelectrode #uhp750 #uhp650 #uhp700 #electrodes #steelmaking #electricarcfurnace #steelmills #steelplants #steelmakers #metalscraps #NACHI #heatingelements #quality #china #carbon DESCRIPTION UHP graphite electrode is used for the recycling of steel in the electric arc furnace industry. Its main ingredient is high-val...
#graphiteelectrode #uhp750 #uhp650 #uhp700 #electrodes #steelmaking #electricarcfurnace #steelmills #steelplants #steelmakers #metalscraps #NACHI #heatingelements #quality #china #carbon
#graphiteelectrode #uhp750 #uhp650 #uhp700 #electrodes #steelmaking #electricarcfurnace #steelmills #steelplants #steelmakers #metalscraps #NACHI #heatingelements #quality #china #carbon Good day,dear friend: Aohui Carbon company here, exporting graphite electrodes in China. Call me please, let's talk details. Ms Hanna Way
奥辉新材料
奥辉新材料 石墨电极,碳素制品
#graphiteelectrode #uhp750 #uhp650 #uhp700 #electrodes #steelmaking #electricarcfurnace #steelmills #steelplants #steelmakers #metalscraps #NACHI #heatingelements #quality #china #carbon
#graphiteelectrode #uhp750 #uhp650 #uhp700 #electrodes #steelmaking #electricarcfurnace #steelmills #steelplants #steelmakers #metalscraps #NACHI #heatingelements #quality #china #carbon DESCRIPTION UHP graphite electrode is used for the recycling of steel in the electric arc furnace industry. Its main ingredient is high-val...
供应产品

Same products

超高功率石墨电极
超高功率石墨电极 卖方: 823406 超高压石墨电极用于电弧炉工业中的钢铁回收。其主要成分是由石油或煤焦油制成的高价值针状焦。石墨电极加工成圆柱形,并在每一端加工有螺纹区域。通过这种方式,可以使用电极接头将石墨电极组装成电极柱。
XINYU CARBON CO., LTD.
XINYU CARBON CO., LTD. 卖方: XINYU CARBON CO., LTD. 位于中国山西,占地面积超过15万平方米,员工超过500人。公司年产量 公司的主要业务是生产和销售直径300毫米至700毫米的常规、大功率和超高功率石墨电极。在过去的10年里,我们的产品已出口到美...
石墨电极
石墨电极 卖方: 吉林成信碳素有限公司 普通功率,高功率,超高功率电极
石墨电极
石墨电极 卖方: 吉林成信碳素有限公司 普通功率,高功率,超高功率电极
UHP graphite electrode 450
UHP graphite electrode 450 卖方: 临漳县三能碳素科技有限公司 石墨电极主要应用于冶金工业和电石、磷化工企业,如钢铁冶炼、工业硅、黄磷、铁合金、钛渣、棕刚玉等矿热炉熔炼生产。 大型石墨电极的典型性能。 直径:350mm-700mm 长度:1850mm-240...