螺钉
7 Thread Cutting Screws
Phillips Pan Thread Cutting Screw Type 23 Fully Threaded
Specification
Diameter: #2,#4,#6,#8,#10,#12,1/4"
Length: From 3/16" to 6"
Coating: Zinc, Yellow Zinc Chipboard Screws Double Countersunk Pozi Drive Type 17
Chipboard Screws Double Countersunk Pozi Drive Type 17 with 6 nibs
Specifications:
Diameter: 2.5mm,3.0mm,3.5mm,4.0mm,4.5mm,5.0mm,6.0mm
Length: From 10mm to 220mm Coating: Zinc, Yellow Zinc
8. Floor screws
Torx Flat Thread Cutting Screw Type F Fully Threaded
Specification:
Diameter: #4, #6,#8,#10,#12,1/4"
Length: From 3/8" to 1 1/2"
Coating: Zinc, Yellow Zinc
9. Pan framing screws
Pan Framing Screws Phillips Drive sharp point
Specification:
Diameter: 3.5 mm (#6), 3.9mm(#7)
Length: 11 mm(7/16")
Coating: Zinc, Black Phosphated Self-drilling Pan Framing Screws Phillips Drive
Specification:
Diameter: 3.5mm(#6),3.9mm(#7)
Length:11mm(7/16")
Coating: Zinc, Black Phosphated 10 hi-lo thread screws
Drywall Screws with hi-low thread
Specification:
Diameter: 3.5mm(#6),3.9mm(#7),4.2mm(#8),4.8mm(#10)
Length: From 16mm to 152mm Or From 1/2" to 6"
Coating: Black Phosphated, Grey Phosphated, Zinc, Yellow Zinc Phillips flat countersunk hi-lo thread with cut point
Specification:
Diameter: 3.9mm
Length: From 16mm to 65mm
Coating: Black Phosphated, Grey Phosphated, Zinc, Yellow Zinc 11 Trim Head Screws
Trim Head Screws Fine Thread Phillips Cross Drive
Trim Head Screws Fine Thread Square Drive
Specification:
Diameter: 3.5mm (#6), 4.2mm (#8)
Length: From 25mm to 64mm or From 1" to 2 1/2"
Coating: Black Phosphated, Grey Phosphated, Zinc, Yellow Zinc
12 Frame to frame (element screws)
Phillips Flat Undercut Self Tapping Screw Type A
Specification:
Diameter: 4.5mm
Length: 55mm, 65mm, 80mm, 95mm
Coating: Zinc, Yellow Zinc 13 Composite Decking Screws
For deck building with the new composite materials
Specification:
Diameter: #8
Length: 2 1/2", 3"
Co
Other supplier products
|
|
木螺钉，大扁头螺钉，水泥螺钉 |
木螺丝 英双线木螺丝，双沉头英双线木螺丝 直径 : 4号、6号、7号、8号 10号、12号 长度 : 从1/2寸 到4寸 表面处理;镀锌 水泥螺钉 大扁头螺钉 |
|
|
纤维板钉 |
干壁钉（干壁螺丝）
细牙/细牙干壁钉；钻尾干壁钉；
直径 : 3.5mm(#6)/3.9mm(#7)
4.2mm(#8)/4.8mm(#10)
长度 : 从16mm 到152mm
从1/2寸 到6寸
表面处理;黑色磷化/灰色磷化
镀锌/镀黄锌/达克罗 |
|
|
干壁钉 |
细牙/细牙干壁钉；钻尾干壁钉；
直径 : 3.5mm(#6)/3.9mm(#7)
4.2mm(#8)/4.8mm(#10)
长度 : 从16mm 到152mm
从1/2寸 到6寸
表面处理;黑色磷化/灰色磷化
镀锌/镀黄锌/达克罗 |
|
|
链带螺钉， 自攻钉，支架钉 |
链带螺钉， 支架钉， 自攻钉 |
|
|
螺钉 |
7 Thread Cutting Screws
Phillips Pan Thread Cutting Screw Type 23 Fully Threaded
Specification
Diameter: #2,#4,#6,#8,#10,#12,1/4"
Length: From 3/... |
供应产品
Same products
