.

Back grinding wheels for thinning

back grindingWheel for inserts

Siliconwafer back grinding wheelsare mainly used for the thinning and fine grinding of the silicon wafer.

Coolant: Oil, emulsion

workpiece processed: silicon wafer of discrete devices, integrated chips (IC) and virgin,ATM, Melchiorre, Peter Wolters, Diskus, Viotto, Wendt

Material of workpiece: monocrystalline silicon and some other semiconductor materials.

Grinders: SHUWA SGM-6301, NTS Nanosurface-180G, NTS Nanosurface 250/NC-VDM

Main role of back grinding wheel

In the middle of the pre-production process, thick silicon wafer can reduce damage; before assembly, silicon wafer is thinned, which is conducive to heat dissipation; reduce package volume; improve mechanical strength (softer after thinning, softer after thinning, minus Small stress); improve electrical performance (short connection); reduce the workload of dicing wafer

Vitrified bond suitable for silicon wafer back grinding wheel

Vitrified bond diamond grinding wheel bond agent has higher strength; good wear resistance, sharp cutting Grinding efficiency is high, and easy to trim; generally suitable for silicon wafers, such as rough grinding, semi-finishing grinding, etc.

The diamond grinding wheel has good self-sharpening performance and is not easy to clog; the grinding efficiency is high, the grinding force is small, and the grinding temperature is low The bonding agent itself has good elasticity and polishing performance; the workpiece has high surface finish and good surface quality; it is suitable for fine grinding and polishing of silicon wafers.

The Specification Of Diamond Back Grinding Wheels:

Model

Diameter (Mm)

Thickness (Mm)

Hole (Mm)

6A2

175

30, 35

76

200

35

76

350

45

127

6A2T

195

170

280

30

6A2T(Three Ellipses)

350

35

235

209

158

Other Size Can Ba Made According To Customers Requirements

silicon wafer back grinding wheel features:

1, surface quality: require grinding lines evenly, without chipping, debris, scribe, etc.;

2, processing accuracy: TTV <5 μm etc. (Total thinning veracity);

3, processing quality: surface roughness: < 10 nm; damage layer thickness: < 10 μm;

Applicationof back grinding wheel

The grinding wheels for LED substrateare mainly used for back thinning of sapphire epitaxial wafer, silicon wafer, gallium arsenide and GaN wafer.

Workpiece processed: sapphire epitaxial wafer, silicon wafer, gallium arsenide and GaN wafer.

Material of workpiece: synthetic sapphire, single crystal silicon, gallium arsenide and GaN materials.

The LED substrate thinning grinding wheel is mainly used for the back surface thinning of the sapphire epitaxial wafer, silicon wafer, gallium arsenide and gallium nitride wafer in the LED industry. The grinding LED substrate grinding wheel developed by our company has superior grinding performance and high cost performance. It can be used stably in European, American, Japanese and domestic grinding machines, and can replace imported products.

If you need any products, do not hesitate to contact



在线联系供应商

至: More Super Hard Products Co., Ltd
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

PCD blanks 51mm 58mm
PCD blanks 51mm 58mm PCD CUTTING TOOL BLANKS 1.The introduction of PCD cutting tool blanks PCD cutting tool blanks consist ofPCD layer integrally sintered at ultrahigh ...
The Used PDC Cutter
The Used PDC Cutter TSP Polycrystalline Diamond Petroleum & Geology Industry Type: Triangle, cylindrical, Square, Flake And so on Lead Time: 10 ~ 12 Da...
Wood Bandsaw Blade
Wood Bandsaw Blade diamond band saw blade with segment used for cutting marble /granite Advantage Using high quality grit electroplated to the blade edge - NIABRA...
PCD Boring lathe tools for carbide roller cutter blades full face PCD
PCD Boring lathe tools for carbide roller cutter blades full face PCD PCD Boring lathe tools for carbide roller cutter blades full face PCD grooving inserts Pcd notcing tools PCD bore cutter for tungsten carbide rol...
King CME Atlas Copco Sandvik DTH button bits sharpening diamond grinding cups
King CME Atlas Copco Sandvik DTH button bits sharpening diamond grinding cups Atlas Copco Sandvik King DTH Button Drill Bits Diamond Grinding Cups/Pins Atlas Button Bits Diamond Grinding Pins: - specially formulated matri...
供应产品

Same products

Die Grinder Bits Carbide Tooling Tungsten Carbide Burrs
Die Grinder Bits Carbide Tooling Tungsten Carbide Burrs 卖方: 株洲煜杰合金材料有限公司 Die Grinder Bits Carbide Tooling Tungstencarbide burrs Carbide Burr: Carbide rotary burr is use...
3 Flutes Solid Tungsten Carbide Chamfering Milling Cutter
3 Flutes Solid Tungsten Carbide Chamfering Milling Cutter 卖方: 株洲煜杰合金材料有限公司 3 Flutes Solid Tungsten Carbide Chamfering Milling Cutter The angle of two sides:60degree,90degre...
Diamond Quick Change Discs
Diamond Quick Change Discs 卖方: 郑州瑞特金刚石砂带有限公司 Size: Φ50mm, Φ75mm Grit: 60#~800# Description ●Taking aluminium or fiberglass as backing, diamond...
Diamond & CBN Flap Wheels
Diamond & CBN Flap Wheels 卖方: 郑州瑞特金刚石砂带有限公司 Size:Diameter: 15mm~80mm, Thickness: 10mm~50mm Grit:Diamond & CBN/60#~1500# Description ●Be t...
Diamond & CBN Discs
Diamond & CBN Discs 卖方: 郑州瑞特金刚石砂带有限公司 Size:Φ10mm~600mm Grit:Diamond & CBN/40~5000# Description ●Can be fixed on electric tools...