.

BS5163/GB RISING STEM WEDGE GATE VALVE

Size Range: DN50-DN800

Pressure: PN1.0-1.6MPa

Body Materials:

Seat Materials:

Disc Materials:

Stem Materials:

Introduction

BS5163/GB Ring stem Gate ValveDesign standard: BS5163Flange: BS4504 PN10.PN16/EN 1092

Face to face dimensions: BS5163

Test standard: BS5163

Work temperature: NBR≤80°,EPDM≤120°

Adoptive Standards

Technical Data

DN50-DN800

PN1.0-1.6MPa

Flange Connection:BS4504 PN10/16, EN1092

Face to Face dimension:BS5163

Product Features

Low torque operation

Rubber encapsulated wedge

Clockwise closing direction

Fusion bonded epoxy coated inside and outside

Product Advantage

1,The valve body is made of precision casting, the precise geometry makes the north of the valve body not need any finishing, so as to ensure the tightness of the valve.

2,The body is made of ductile iron QT450-10, shall not be broken by transportation, collision or installation.

3,The valve body adopts streamlined design, so that the medium moves straight in the valve cavity, the flow resistance is smaller and the flow area is larger.

4,The valve adopts bidirectional sealing design, and the installation direction and medium flow direction are not limited.

5,The inside and outside of the valve bodyadopt powder epoxy resin electrostatic coating, which can effectively prevent corrosion and rust caused by contact between valve body and medium, and can be used in sewage system.

6,The valve plate adopts high-quality overall rubber coating, the use of advanced technology makes the vulcanized rubber vulcanization after the valve plate to ensure accurate geometry, and the rubber and ductile iron gate connection is firm and not easy to fall off with good elastic memory, so as to ensure the stable performance of the valve sealing.

7,The bottom of the valve body adopts no groove design, and does not cause accumulation of impurities or dirt, thereby effectively avoiding the leakage caused by impurities scratching of the valve seat.

8,The valve stem is designed with three "O" ring seal. The friction resistance of the switch can be reduced, water leakage is greatly reduced, and the sealing ring can be replaced without cutting off water.

9,The screw made of aluminum bronze material, so the switch is more smooth, not easy to rust, difficult blockage.

10,The overall of valve adopt non rising stem design, reducing the valve, especially large diameter valve installation space.

11,For the installation of valves using in deep well and underground pipe, deep well connecting cap or lengthening rod mechanism can be provided according to customer requirements.

12,Bkvalve company specialized intentions since 2001, has a professional production, sales, research, after-sales team, is your strong backing of sales and use.

Standard Test
Shell test

The cold test of the valve body, which is connected with the valve body and the valve cover,

is carried out to test the structural strength, pressure resistance and compactness of the

valve housing, including the whole housing in the fixed connection

Closure test

Test of sealing performance between valve opening and closing parts and seat seal, between

valve body and valve seat

Test pressure

The display pressure of the valve lumen during the experiment

Test fluid

Liquid or gas for pressure test of valves

Test fluid temperature

The temperature of the liquid or gas used for the pressure test of the valve shall be in the

range of 5-40 unless otherwise specified

Resilient seats

Seals made of non-metallic elastic materials, solid and semisolid lubricants, etc.



在线联系供应商

至: TIANJIN BKVALVE Manufacturing Co., Ltd
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

PNEUMATIC STAINLESS STEEL FLANGE BALL VALVE  BKVALVE
PNEUMATIC STAINLESS STEEL FLANGE BALL VALVE BKVALVE pneumatic stainless steel flange ball valve Features 24 months guarantee Name: flange end floating ball valve Size: DN15-DN250 ...
PNEUMATIC WAFER BUTTERFLY VALVES
PNEUMATIC WAFER BUTTERFLY VALVES 24 months guarantee Zero Leakage Bi-Directional Low Torque,long life cycle 360°polished disc assures positive on-off Epoxy coated body,smo...
FLANGE DOUBLE ECCENTRIC BUTTERFLY VALVE
FLANGE DOUBLE ECCENTRIC BUTTERFLY VALVE flange butterfly valveFeatures 24 months guarantee Zero Leakage Bi-Directional Low Torque,long life cycle 360°polished disc assures positi...
3 PCS STAINLESS STEEL FLANGE BALL VALVE
3 PCS STAINLESS STEEL FLANGE BALL VALVE Name: 3pcs flange floating ball valve Size: DN15-DN250 End flange ANSI B 16.1,EN1092,AS2129 Face to Face ANSI B 16.10 ...
LUGGED STAINLESS STEEL KNIFE GATE VALVE
LUGGED STAINLESS STEEL KNIFE GATE VALVE Size Range: DN50-400 Pressure: PN1.0/1.6mpa Body Materials: Cast iron,Ductile Iron Seat Materials: Disc Materials: Stem Materials: Lugged...
供应产品

Same products

Disc Wafer Check Valve
Disc Wafer Check Valve 卖方: ZhengFeng Valve Group ZECO Valve Group, founded in 1991 with focus on manufacturing china water valve, including contro...
GREY FRPP FOOT/BOTTOM VALVE
GREY FRPP FOOT/BOTTOM VALVE 卖方: Kaixin Pipeline Technologies Co.,Ltd Grey FRPP Foot Operated Bottom Valve Custom 4 Inch DN15-DN300 Low Price Industrial Plastic Foot V...
Hydraulic Control Valve
Hydraulic Control Valve 卖方: Tianjin KXC Metal Products Co., Ltd are used to contain and transfer the flow and pressure of hydraulic fluid in hydraulic systems. ...
Thread Globe Valve
Thread Globe Valve 卖方: Tianjin KXC Metal Products Co., Ltd is a linear motion valve and are primarily designed to stop, start and regulate flow. The disk o...
Manual Wafer Butterfly Valve
Manual Wafer Butterfly Valve 卖方: 天津市江瑞流体设备有限公司 Carbon steel wafer butterfly valve with handle operation We supply Carbon steel material wafer t...