LUGGED STAINLESS STEEL KNIFE GATE VALVE
Size Range: DN50-400
Pressure: PN1.0/1.6mpa
Body Materials: Cast iron,Ductile Iron
Seat Materials:
Disc Materials:
Stem Materials:
Lugged Knife Gate Valve Feature
1. Knife gate valve opening and closing part is the valve plate, the plate movement direction is perpendicular to the direction of the fluid. Knife gate valve can only be fully open and fully closed, can’t be used for adjusted and the throttle.2.The valve plate has two sealing surfaces. The two sealing surfaces of the most common gate valve forming the wedge, the wedge angle various according to the valve parameters, usually is 50. Wedge knife gate valve plate can be made into a whole part , called the rigid gate plate; also be made to that can produce small quantities of deformation in order to improve its production process, to make up the sealing surface angle deviations arising during processing, this plate called resilient plate. The seal can only rely on media pressure to seal, which rely on media pressure to ram pressure to the sealing surface of the other side of the seat to ensure the seal, which is self-sealing.
Product Advantage
1,The valve body is made of precision casting, the precise geometry makes the north of the valve body not need any finishing, so as to ensure the tightness of the valve.
2,The body is made of ductile iron QT450-10, shall not be broken by transportation, collision or installation.
3,The valve body adopts streamlined design, so that the medium moves straight in the valve cavity, the flow resistance is smaller and the flow area is larger.
4,The valve adopts bidirectional sealing design, and the installation direction and medium flow direction are not limited.
5,The inside and outside of the valve bodyadopt powder epoxy resin electrostatic coating, which can effectively prevent corrosion and rust caused by contact between valve body and medium, and can be used in sewage system.
6,The valve plate adopts high-quality overall rubber coating, the use of advanced technology makes the vulcanized rubber vulcanization after the valve plate to ensure accurate geometry, and the rubber and ductile iron gate connection is firm and not easy to fall off with good elastic memory, so as to ensure the stable performance of the valve sealing.
7,The bottom of the valve body adopts no groove design, and does not cause accumulation of impurities or dirt, thereby effectively avoiding the leakage caused by impurities scratching of the valve seat.
8,The valve stem is designed with three "O" ring seal. The friction resistance of the switch can be reduced, water leakage is greatly reduced, and the sealing ring can be replaced without cutting off water.
9,The screw made of aluminum bronze material, so the switch is more smooth, not easy to rust, difficult blockage.
10,The overall of valve adopt non rising stem design, reducing the valve, especially large diameter valve installation space.
11,For the installation of valves using in deep well and underground pipe, deep well connecting cap or lengthening rod mechanism can be provided according to customer requirements.
12,Bkvalve company specialized intentions since 2001, has a professional production, sales, research, after-sales team, is your strong backing of sales and use.
Standard Test
Shell test
The cold test of the valve body, which is connected with the valve body and the valve cover,
is carried out to test the structural strength, pressure resistance and compactness of the
valve housing, including the whole housing in the fixed connection
Closure test
Test of sealing performance between valve opening and closing parts and seat seal, between
valve body and valve seat
Test pressure
The display pressure of the valve lumen during the experiment
Test fluid
Liquid or gas for pressure test of valves
Test fluid temperature
The temperature of the liquid or gas used for the pressure test of the valve shall be in the
range of 5-40 unless otherwise specified
Resilient seats
Seals made of non-metallic elastic materials, solid and semisolid lubricants, etc.
在线联系供应商
Other supplier products
 |
STAINLESS-STEEL-FLANGED TRIPLE OFFSET BUTTERFLY VALVE | stainless-steel-flanged-triple-offset-butterfly-valve Features 24 months guarantee Zero Leakage Bi-Directional Low Torque,long life cycle 360&... |
 |
WORM GEAR OPERATED LUG BUTTERFLY VALVE OF BKVALVE | worm-gear-operated lug butterfly valve Features 24 months guarantee Zero Leakage Bi-Directional Low Torque,long life cycle 360°polished di... |
 |
PNEUMATIC WAFER BUTTERFLY VALVES | 24 months guarantee Zero Leakage Bi-Directional Low Torque,long life cycle 360°polished disc assures positive on-off Epoxy coated body,smo... |
 |
BS5163/GB RISING STEM WEDGE GATE VALVE | Size Range: DN50-DN800 Pressure: PN1.0-1.6MPa Body Materials: Seat Materials: Disc Materials: Stem Materials: Introduction BS5163/GB Rin... |
 |
STAINLESS STEEL CONCENTRIC FLANGE BUTTERFLY VALVE | stainless steel concentric flange buttefly valve Features 24 months guarantee Zero Leakage Bi-Directional Low Torque,long life cycle 360°p... |
Same products
 |
Universal Union with Filter Angle Valve | 卖方: Zhejiang Huaqi Information Technology Co., LTD | In commercial applications, such as in hotels or office buildings, brass fill valves are used to ... |
 |
Propane Gas Fire Pit Valve Control System Kit | 卖方: Dong Guan ABYDA Gas Valve Co., Ltd | Product Specification:1. 1/2" Brass Control Key valve with 3/8" male flare adapter of 2;2. 3" Key... |
 |
UB6 Sleeved Plug Valve | 卖方: China JSC Valve Manufacturer Group Co., Ltd. | PTFE Sleeved Plug ValveValve description: Sleevedplug valve, PTFE seatDesign standard: API 599Bod... |
 |
Y Type Check Valve | 卖方: China JSC Valve Manufacturer Group Co., Ltd. | Discover quality with our Y Type Check Valve from China. Made of forged Carbon Steel ASTM A105N, ... |
 |
ASTM A352 LCC Wedge Gate Valve | 卖方: China JSC Valve Manufacturer Group Co., Ltd. | Explore our top-tier wedge gate valve meticulously crafted in our Chinese factory, featuring prem... |
