Pressure Regulating Valve price
Specificationsof
This section lists the specifications for the MR95 Series regulators. Factory specification such as type, maximuminlet pressure, maximum temperature, maximum outlet pressure, spring range, orifice size and seat material arestamped on the nameplate fastened on the regulator at the factory.
Available Constructionsof
Type MR95L:Pressure reducing regulator foroutlet pressures from 2 to 30 psig / 0.14 to 2.1 bar. 1/4 in. to 1 in. body sizes only.
Type MR95H:Pressure reducing regulatorfor outlet pressures from 5 to 150 psig / 0.34 to 10.3 bar.
Type MR95HP:
Pressure reducing regulatorfor outlet pressures from 15 to 400 psig / 1.0 to 27.6 bar (soft-seated).
Type MR95HT:High temperature pressurereducing regulator for outlet pressures from 15 to
300 psig / 1.0 to 20.7 bar (metal seat) and up to 650°F / 343°C.
Type MR95LD:Pressure reducing differentialregulator for differential set pressures from 2 to 30 psi / 0.14 to 2.1 bar with maximum inlet pressure up to 300 psi / 20.7 bar and maximum
outlet pressure up to 125 psi / 8.6 bar. 1/4 in. to 1 in. body sizes only.
Type MR95HD:Pressure reducing differentialregulator for differential set pressures from 5 to
150 psi / 0.34 to 10.3 bar with maximum inlet/ outlet pressures up to 300 psig / 20.7 bar.
Type MR95HD:Pressure reducing differentialregulator for differential set pressures from 5 to
150 psi / 0.34 to 10.3 bar with maximum inlet/ outlet pressures up to 600 psi / 41.4 bar.
We are .
在线联系供应商
Other supplier products
 |
Flygt Sewage pump | PRODUCT FEATURES State-of-the-art wastewater pump with N-technology Sustained high efficiency with energy savings up to 25% Flexible and mod... |
 |
LAPAR VALVE | Thanks for your use or future use of Lapar series of products and your attention to Lapar.LAPAR, headquarted in Milan,Italy,is one of interna... |
 |
YARWAY BLOW-OFF VALVES | SEATLESS, HARDSEAT AND UNIT TANDEM Designed for blow-off service in boiler systems with pressures of 3206 psig FEATURES •Designedacco... |
 |
Rotary Vane Vacuum Pump | Basic Principle The sucking and exhausting valves are usually fitted in the round pump body where there is a centrifugal rotor with three vanes ... |
 |
2BE Liquid ring vacuum pump | 2BE CONSTRUCTION TYPE The 2BE liquid ring are of uncomplicated and robust construction with the following particular features: non-polluting... |
