liquid ring vacuum pump manufacturer
Available in both cast iron and stainless steel construction, the 2BV family provides capacities up the 600m3/h(360CFM) in a compact monoblock design.
Space-saving installation
When compared to conventional pumps, the 2BV5’s monoblock design delivers the benefits of a simple, compact and economicalintallation. Since the pump and motor are integral and self supporting there is no need for additional baseplates, couplings or guards, which add to the cost, complexity and overall size of the installation.
Rugged and reliableof
We focused on durability and dependability when we developed these liquid-ring pumps.Wiht a reinforced stainless steel shaft and sealed bearings, the 2BV can provide up to20,000 hours of maintenance-free operation. Additional features such as the iron pump’s ceramic coated casingprevent wear and ensure constant performance even under harsh conditions.
Quiet operationof
The 2BV is expertly designed and manufactured to be quiet and vibration free. With sound pressure levels of less that 75dBA, it complies with the strictest noise standards, eliminating the need for additional sound attenuating devices.
Advantages at a glance
●-Compact
●-Rugged design for reliable operation and long service life
●-Precision-balanced rotor
●-For worldwide use 50/60HZ motors
●-Available from stock
●-Low installation costs
●-Easy to service
●-Standar mechanical seal
●-Reinforced stainless-steel shaft in the pump body
Main applicationsof
●-Plastics industry
●-Chemical industry
●-Medical technology
●-Food and beverage industry
●-General industry
|
TYPE |
Power( Kw ) |
Suc Cap (m³/h) |
Speed (rpm) |
|
2BV2060 |
27 |
2830 |
|
|
2BV2061 |
52 |
2840 |
|
|
2BV2070 |
80 |
2880 |
|
|
2BV2071 |
110 |
2890 |
|
|
2BV5110 |
4 |
165 |
1440 |
|
2BV5111 |
230 |
1440 |
|
|
2BV5121 |
280 |
1440 |
|
|
2BV5131 |
11 |
400 |
1460 |
|
2BV5161 |
15 |
500 |
970 |
The operating data are applicable under the following conditions:
water vapour saturated air:20°C
service liquid:- water: 15°C
Compression pressure1013 mbar (atmospheric pressure)
----38V/50HZ
Material design
HT200
SS304
在线联系供应商
Other supplier products
 |
Flame Arresters | The Enardo Detonation represents thebest value in flame arrestor protection. They prevent flamepropagation by absorbing and dissipating heat us... |
 |
Flygt blender | Founded in Sweden more than 100 years ago, Flygt is a well-known water pump brand, sewage treatment solution provider and water technology co... |
 |
Industrial Pressure Regulators | Thanks for your use or future use of Lapar series of products and your attention to Lapar.LAPAR, headquarted in Milan,Italy,is one of internatio... |
 |
Flygt Sewage pump | PRODUCT FEATURES State-of-the-art wastewater pump with N-technology Sustained high efficiency with energy savings up to 25% Flexible and mod... |
 |
FLYGT submersible pump agents | PRODUCT FEATURES State-of-the-art wastewater pump with N-technology Sustained high efficiency with energy savings up to 25% Flexible and mod... |
Same products
 |
OEM 定制卧式 LB 系列冰箱润滑油齿轮泵 | 卖方: 河北盛辉泵业 | LB 系列冷冻机齿轮泵适用于输送粘度在 200°E （1500mpa.s）以下，无固体颗粒杂质，温度不高于 120° 的各种机械油、透平油及其它性质相近，性能平稳的介质。该设备结... |
 |
OEM 定制卧式 LB 系列冰箱润滑油齿轮泵 | 卖方: 河北盛辉泵业 | LB 系列冷冻机齿轮泵适用于输送粘度在 200°E （1500mpa.s）以下，无固体颗粒杂质，温度不高于 120° 的各种机械油、透平油及其它性质相近，性能平稳的介质。该设备结... |
 |
新款 YHCB 系列可移动卧式圆弧齿轮输油泵 | 卖方: 河北盛辉泵业 | YHCB 系列圆弧齿轮泵专为输送高粘度流体（如油、树脂和化学溶液）而设计。这些泵广泛应用于需要精确可靠地处理流体的行业，包括石化、食品加工和制药行业。它们设计坚固、流量控制精确、易于维护，是需要... |
 |
便携式WCB系列不锈钢高粘度柴油齿轮输送泵 | 卖方: 河北盛辉泵业 | WCB齿轮油泵重量轻，体积小，携带移动方便。结构采用联轴器与介质隔离，联轴器单独润滑，齿轮采用合金钢，采用特殊的热加工工艺，表面硬度可达HRC60以上，耐磨性强，使用寿命长。与其它普通型泵相比，... |
 |
库存 ZYB 系列不锈钢废重油输送高压齿轮泵 | 卖方: 河北盛辉泵业 | ZYB系列废油泵用于抽送温度不高于200℃，粘度不大于150mm2/S含有非金属杂质的重油、柴油、煤焦油及粮油、化工、建材、日化等产品中的杂质。本机采用自密封润滑设计，间隙自动调整结构，零件采用... |
