HIGH ACCURACY PRESSURE SENSOR
Industrial Pressure Transducers
Pressure Type: Gauge / Absolute
Pressure Range: 0~7MPa / 0~4MPa
Pressure Accuracy: 0.25%FSO / 0.1% FSO
Output: 4~20ma/ 0~5V/ 0~10V RS485
High accuracy pressure transducer applies a silicon strain diaphragm embedded in an oil-filled steel housing and the repeatable & low hysteresis properties of silicon are exploited by the difference normalization digital amplifier to provide precision optimized measurement results around the ambient temperature range. A four Wheatstone bridge is diffused into a silicon wafer and then micro-machined to exacting standards to produce a high precision pressure sensor.
APPLICATION OF LEFOO HIGH ACCURACY PRESSURE SENSOR
Through a high precision and long-term stability, these high accuracy pressure transducersand transmitters are particularly suited for applications in flow
or in any facility where high-precision measurement is required. They are used as pressure measuring devices in modern automated industries for higher energy efficiency and longer equipment lifespan. These characteristics make it a valuable tool in metrology, hydrology, oceanography, industries.
HIGH ACCURACY PRESSURE SENSOR HAS THE APPLICATIONS AS BELOW
Testing technology
Calibration technology
Geoscience/hydrology
High accuracy pressure sensing in original equipment manufacturing (OEMs)
Aerospace / Military
Laboratories and maintenance shops
Leak and burst applications
Wind tunnels
Level monitoring
OEM / Test Bench
Aviation
FACTORS IMPACT ON THE ACCURACY
There are many factors that influence the choice of a sensing device in a certain application. Gauge pressure sensor, absolute or differential, transducer or transmitter, measurement range, fitting style/size, and absolute maximum ratings such as burst pressure are among the most important.
FACTORS AFFECTING ACCURACY
Making the right choice can then be guided by considering factors that affect accuracy. The major sensor characteristics that influence accuracy are temperature coefficients, temperature hysteresis, pressure hysteresis, and non-linearity. Applicable temperature coefficients include temperature-related changes to zero offset, sensitivity, and measurement span.
TEMPERATURE ERROR OVER 85°C
The LFT2010 high accuracy pressure differentialtransducer for a high-temperature application over 85 °C will cause permanent damage to accuracy. The ideal working temperature is within the range of -10°C to 70°C. For example, there are some common sensors on the market with 0.5% accuracy( not LEFOO products). The 0.5% FS accuracy does not include the permanent temperature error which is an additional 0.02%X3=0.06% per degree per second.Celsius.The extremely high temperature will ruin the accuracy and the sensor in seconds.
To reduce this additional temperature error and assuming you have the ability to calibrate the sensor when the temperature is between 80 and 90°C, LEFOO pressure control treats the error from room temp up to 90℃ as a calibration shift since you are only interested in optimizing performance between 80 and 90°C. So the easiest way to reduce the temperature error is to check the output signal at zero and full-scale pressure when the temperature is at its mid-point 85°C. If you are not able to set full-scale pressure, an even simpler method is to just check the zero shift at 85°C since most of the thermal error is typically contributed by the thermal zero shift.
CUSTOM HIGH ACCURACY PRESSURE TRANSDUCERS
LEFOO offer ODM and OEM pressure transducers that have excellent long-term stability, linearity, repeatability. LEFOO can also supply custom-configured banks of transducers in calibration test carts, racks, or benches to fulfill a specific need for flexibility in pressure range and temperature compensation.
The custom systems can contain a variety of components including controlling software, pressure controllers, pressure switch and any customer-specified ancillary equipment necessary.
在线联系供应商
Other supplier products
 |
LEFOO PRESSURE SWITCH HVAC | A pressure switch controlis a control device that runs a switch on or switch-off action when a preset pressure value occurs. LEFOO low pressure swi... |
 |
SUBMERSIBLE LIQUID LEVEL SENSOR | Submersible level sensor Working temperature: -20~85°C Protection Level: IP68 Measure Precisement: 0.5% F.S Measurement type: Temperature +... |
 |
LEFOO PRESSURE TRANSMITTER MANUFACTURER | A water pressure transmitter(pressure transducer) converts the physical quantity 'force per area' into an industry-standard signal that machines ca... |
 |
PRESSURE SWITCH CONTROLLER | The pressure switch controlleris an important device for controlling the activation and deactivation of air compressor or liquid displace systems w... |
 |
Lefoo Differential Pressure Gauge LFB | Consists of magnetic spiral movement and a rubber diaphragm as the sensitive element to measure the pressure. LEFOO pressure differential monitorLF... |
Same products
 |
R404a Scroll Compressor for Cold Chain Transportation | 卖方: Scroll Air Compressor,Electric Scroll Compressor | Optimized for Cold Chain Vehicles & Containers The34cc R404a scroll compressor for cold chai... |
 |
Electric scroll compressor with R404a Refrigerant | 卖方: Scroll Air Compressor,Electric Scroll Compressor | Introduction Leling's compact refrigeration scroll compressor (18CC) is specially engineered for... |
 |
Vapor Injection Compressor With Enhanced Enthalpy | 卖方: Scroll Air Compressor,Electric Scroll Compressor | The vapor injection compressor with enhanced enthalpy is a new type of compressor improved on the... |
 |
R404a Refrigeration Compressor | 卖方: Scroll Air Compressor,Electric Scroll Compressor | R404a Refrigeration Compressor The refrigeration and freezing scroll compressor is a type of com... |
 |
DC variable frequency electric scroll compressor | 卖方: Scroll Air Compressor,Electric Scroll Compressor | The electric scroll compressoris mainly composed of moving scroll plate, stationary scroll plate,... |
