.

RS485 protocol stepper controller for robotics control system

PMC006B3 is a kind of miniature integrated stepper motor controller,which can be directly mounted onto Nema17 stepper motor. The microsteppingstepper controllercan achieve Networking as many as 35 pieces stepper motor n controller controlled by one upper host PC, PLC orTablet PC.PMC006B3 provides a simple and rich set of control commands,which not only greatly simplifies the complexity of the upper layer control system, but also maximally reserves flexibility of control, and is suitable for all kinds of high precision, wide range of industry using.
Power supply: 12-36VDC
Phase current Max 2.75A
Full, half, 1/4th, 1/8th, 16th and 32th Microstepping



在线联系供应商

至: JUGETEK(Shanghai)Co.,Ltd
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

2相 四线 NEMA17 步进电机 42 电机3D打印机用
2相 四线 NEMA17 步进电机 42 电机3D打印机用 这Nema17步进是你需要为您的Reprap,Makerbot和其他3D打印机或CNC或激光或等离子切割机套件。 每转200步(1.8度/步) 2相双极4线 额定电压2V DC(不是该步进电机的工作电压,使用12V,24V或甚至更高至36V驱动此电机) 额定电流1.2A 相电阻:1.7欧姆&p...
RS485 protocol stepper controller for robotics control system
RS485 protocol stepper controller for robotics control system PMC006B3 is a kind of miniature integrated stepper motor controller,which can be directly mounted onto Nema17 stepper motor. The microsteppingstepp...
NEMA17 Stepper Motor 40mm Long, 1.2A for 3D printing
NEMA17 Stepper Motor 40mm Long, 1.2A for 3D printing This Nema17 Stepper is what you need for your Reprap, Makerbot and other 3D Printers or CNC or Laser or Plasma cutter kits.200 steps per revolution...
NEMA17 size steNEMA17 size stepper motor driver miniature pulse and direction driver pper motor driver miniature pulse and direction driver
NEMA17 size steNEMA17 size stepper motor driver miniature pulse and direction driver pper motor driver miniature pulse and direction driver The stepper driver has the advantages of miniature size, strong driving force, low heat dissipation, it can provide 0-5A peak current per phase.Mai...
NEMA17 Stepper Motor 40mm Long, 1.2A for 3D printing
NEMA17 Stepper Motor 40mm Long, 1.2A for 3D printing This Nema17 Stepper is what you need for your Reprap, Makerbot and other 3D Printers or CNC or Laser or Plasma cutter kits.200 steps per revolution...
供应产品

Same products

HTT-02 Hot Tack Tester
HTT-02 Hot Tack Tester 卖方: Cell Instruments Co., Ltd The HTT-02 Hot Tack Testeris specifically designed to assess this property by measuring the stren...
SPC-01 Stretch Film Peeling Cling Tester
SPC-01 Stretch Film Peeling Cling Tester 卖方: Cell Instruments Co., Ltd The SPC-01 Stretch Film Peeling Cling Testermeasures the adhesion between two layers of stretch f...
FTT-01 Film Thickness Tester
FTT-01 Film Thickness Tester 卖方: Cell Instruments Co., Ltd The FTT-01 FilmThickness Testerutilizes a mechanical scanning technique to measure the thickness ...
TST-01 Tensile Tester
TST-01 Tensile Tester 卖方: Cell Instruments Co., Ltd TST-01 tensile testers are suitable for conducting a variety of tests, including tensile strength...
HST-01 Heat Seal Tester
HST-01 Heat Seal Tester 卖方: Cell Instruments Co., Ltd HST-01 HeatSeal Testeris designed for laboratory use, to assess the heat seal ability of surfaces...