.

Pensky-martens closed cup flash point tester

Scope of application

The instrument is designed and made as per the National Standard GB/T261 ASTM D93 ISO 2719 Test Methods for Flash Point and Fire Point of Petroleum Products, It is used to determine flash point of petroleum products and bituminous materials, excepting fuel oil and materials having a flashpoint of lower than 79 °C.

Function characteristics

1, with the operating software prompts;

2, with the experimental date, test time parameter prompts;

3, automatic correction of atmospheric pressure and calculated correction values;

4 differential detection, automatic correction system deviation;

5, opening the lid, ignition, detection, print test data computer is done automatically;

6, electronic ignition, the gas flame, forced air cooling.

7, the innovative use of the furnace automatically tilt system, the experiment after the furnace cooling rate faster, greatly shortened several times the time interval between experiments

Technical parameters

1 Power supply: AC 220V ± 10%, 50Hz

2, range: room temperature ~ 300 ° C;

3, Repeatability: ≤ 2 ℃

Reproducibility: ≤ 4 ° C The visibility: 0.1 ℃

5, Accuracy: 0.5 ℃

6, heating rate: GB/T261-Standard

7 Ignition way: electronic ignition gas flame

8, to adapt to the environment temperature :10-40 ℃

9, adapt to the environment humidity: <85%

10 Total power consumption: not more than 300W


在线联系供应商

至: Changsha Friend Experimental Analysis Instrument Co., Ltd
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

 Engine coolant corrosion tester
Engine coolant corrosion tester Scope of application ApplicationrangetheenginecoolantcorrosionMeterinstrumentspecificallydesignedandmanufacturedaccordingtothethepetrochemicalStand...
Rapid low temperature Closed Cup Flash Point tester
Rapid low temperature Closed Cup Flash Point tester
Karl fischer titrator
Karl fischer titrator Measuring compliance with octane number: ASTM D 2699-86, ASTM D 2700-86 diesel cetane measuring compliance with ASTM D4737-03, ASTM D 613, EN ISO 5...
Sulfur content analyzer in petrol products (X-ray spectroscopy methods)
Sulfur content analyzer in petrol products (X-ray spectroscopy methods) Scope of application Sulfur content of petroleum products tester (X-ray spectroscopy) People's Republic of China in accordance with requirements of...
 Automatic cleveland open cup flash point tester
Automatic cleveland open cup flash point tester Scope of application Color LCD, the analog trace shows a function of time warming up and test curve, automatic program sweep, automatic ignition, a...
供应产品

Same products

Air Permeability Tester STD- F8
Air Permeability Tester STD- F8 卖方: Standard International Group (HK) Limited The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
Surface Performance Tester STD-FB4 - A
Surface Performance Tester STD-FB4 - A 卖方: Standard International Group (HK) Limited Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
Compression Tester STD - FB3 - A
Compression Tester STD - FB3 - A 卖方: Standard International Group (HK) Limited TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
Single - Strand Bending Tester STD - FB2 - SH
Single - Strand Bending Tester STD - FB2 - SH 卖方: Standard International Group (HK) Limited Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
Bending Tester STD- FB2 - S
Bending Tester STD- FB2 - S 卖方: Standard International Group (HK) Limited Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...