Sulfur content analyzer(Coulomb's law methods)
Scope of application Microcoulomb sulfur analyzer uses the principle of micro-coulometric titration, the sample combustion occurs when the redox reactions in the cracking tube, the carrier gas into the titration cell, and with I3-or Ag + react by measuring the electrolytic titration the consumption of electricity, according to Faraday's law, to obtain the total sulfur or total chlorine content of the sample. Function characteristics 1, the instrument uses the Windows operating platform, Chinese interface 2, the computer controls the entire analysis, data processing and other processes, the display state of the whole working process, the parameters may be required, save or print the result 3, the instrument uses the international fashion circuit and imported components, reducing instrument noise and improve the detection sensitivity and reliable performance 4, the instrument measurement accuracy and stability. Technical parameters 1, measuring range: Sulfur 0.1mg / L ~ 10000mg / L ~ percentage Chlorine 0.3mg / L ~ 10000mg / L ~ percentage 2, the sample state: solid, liquid, gas (matching the corresponding injector). 3, Temperature range: room temperature ~ 1000 ℃ ± 3 ℃ 4, repeatability error: X 10mg / L Cv ≤ 5% FDR-3106 sulfur content of petroleum products tester (Coulomb's law), applies to a relatively high sulfur content of the material to detect heavy oil, coal and so on.
在线联系供应商
Other supplier products
| Karl fischer titrator | Measuring compliance with octane number: ASTM D 2699-86, ASTM D 2700-86 diesel cetane measuring compliance with ASTM D4737-03, ASTM D 613, EN ISO 5... | |
| Automatic closed cup flash point tester of petroleum products | Scope of application Applied standards: GB/T 261-2008, ASTM D93-02 Application range: applies to the determination of flash point of petroleum prod... | |
| Gasoline oxidation stability teste | The instrument is designed and made as per GB/T8018, ISO5736,ASTM D525, DIN51781 Function characteristics 1,Oxidation stability analyzer, automatic... | |
| Sulfur content analyzer (lamp methods) | Scope of application Sulfur Content Analyzer(Lamp Method) is designed and madeas perthe National Standard of People’ Republic of China GB/T38... | |
| Pensky-martens closed cup flash point tester | Scope of application The instrument is designed and made as per the National Standard GB/T261 ASTM D93 ISO 2719 Test Methods for Flash Point and Fi... |
Same products
| Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... | |
| Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... | |
| Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... | |
| Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... | |
| Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
















