Medical Face Mask Air Exchange Pressure Difference Tester
Products meet the standard requirements, which is YY0469-2004 "Medical surgical mask technical requirements" and YY 0969-2013 "Disposable medical masks", medical face mask air exchange pressure difference tester is measured by gas pressure difference on both sides of the mask (ie the damping from the mask exert to the airflow) to determine the breathability of the mask, and the instrument test results is accurate.
The device is used for the determination of gas exchange pressure difference of medical surgical masks and can also be used to determine the gas exchange pressure difference of other textile materials。
YY 0469-2011Surgical mask
YY 0969-2013Single-use medical face mask
EN 14683:2014Medical face masks - Requirements and test methods
YY 0969-2013Single-use medical face mask
EN 14683:2014Medical face masks - Requirements and test methods
1, using the suction gas source as the instrument power source, free from test space constraint;
2, with a high precision differential pressure sensor, digital show the sample pressure of both sides;
3, special sample holder to ensure a good clamping sample.
2, with a high precision differential pressure sensor, digital show the sample pressure of both sides;
3, special sample holder to ensure a good clamping sample.
Technical Parameters
| Items | Parameters |
| Air supply | Suction type |
| Air flow | 8L / min |
| Seal type | O-ring seal |
| Sample breathable diameter | Φ25mm |
| Differential pressure sensor range | 0 ~ 500Pa |
| Display mode | Digital display pressure difference |
| Power supply | 220V, 50Hz |
在线联系供应商
Other supplier products
 |
Precision Hastelloy slicer | Used to detect the production of accurate fiber cross-section of the sample material, in order to facilitate the fiber cross-section under the m... |
 |
Tearing Strength test instrument | IntroductionLiftthependulumuptoacertainheighttogiveitaninitialpotentialenergy.Thependulumtearsthespecimenwhileswingingdown.Theelectronictestsystemc... |
 |
Digital Autoburst Strength Tester | Digital Autoburst Strength Tester Standards: ASTM D3786, ERT 80-4-20, GB/T 7742.1, BS EN ISO 13938-1, BS 3424-6-B, ISO 3303-B, ISO 2758, ISO 3303... |
 |
Bally Type Flexometer | Bally Type Flexometer 6-12-24 Working Places Standards: EN ISO 20344:6.6, I.U.P.10+20, I.U.P.20, UNI 4818, DIN 53.351, UNE/I.U.P.20 Applications： ... |
 |
fabric textile random tumble pilling tester | Random Tumble Pilling Tester, to determine the pilling and fuzzing characteristics of textile fabrics.Random Tumble Pilling Tester uses stainless s... |
