Medical Face Mask Air Exchange Pressure Difference Tester
Products meet the standard requirements, which is YY0469-2004 "Medical surgical mask technical requirements" and YY 0969-2013 "Disposable medical masks", medical face mask air exchange pressure difference tester is measured by gas pressure difference on both sides of the mask (ie the damping from the mask exert to the airflow) to determine the breathability of the mask, and the instrument test results is accurate.
The device is used for the determination of gas exchange pressure difference of medical surgical masks and can also be used to determine the gas exchange pressure difference of other textile materials。
YY 0469-2011Surgical mask
YY 0969-2013Single-use medical face mask
EN 14683:2014Medical face masks - Requirements and test methods
YY 0969-2013Single-use medical face mask
EN 14683:2014Medical face masks - Requirements and test methods
1, using the suction gas source as the instrument power source, free from test space constraint;
2, with a high precision differential pressure sensor, digital show the sample pressure of both sides;
3, special sample holder to ensure a good clamping sample.
2, with a high precision differential pressure sensor, digital show the sample pressure of both sides;
3, special sample holder to ensure a good clamping sample.
Technical Parameters
| Items | Parameters |
| Air supply | Suction type |
| Air flow | 8L / min |
| Seal type | O-ring seal |
| Sample breathable diameter | Φ25mm |
| Differential pressure sensor range | 0 ~ 500Pa |
| Display mode | Digital display pressure difference |
| Power supply | 220V, 50Hz |
Send product request
Other supplier products
 |
G506 Mask Automatic Filter Performance Tester | Description: The latest G506 mask automatic filter performance tester uses the most advanced technology and design concepts, to meet a variety o... |
 |
Launder-ometer /washing color fastness tester | IntroductionLaunder-ometer /washing color fastnesss tester can be used for washing, dry cleaning color fastness test. Double cylinder separation, r... |
 |
moisture management tester | The Moisture Management Tester is the only instrument on the market that can precisely measure the liquid management properties of performance and ... |
 |
PFE Tester | Medical Face Mask Particle Protection Tester Echnical Features:It is equipped with a special salt aerosol generator, which can generate aerosols of... |
 |
Leather Water Vapor Permeability Tester | Standards:UNI EN IUP/15, UNI EN 13515, EN ISO 20344: 6.6, IUP 15, BS 3144 Method 24, SLP 25，DIN 53333, ISO 17699, DIN 53 429, METODO - 309 WI 009Ap... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
