Taber abrasion resistance test machine
Range of application
TABER abrasion resistance tester and wear resistance tester can be replaced by wheel and weight,
which apply to the abrasion resistance performance test on fabric, cardboard, paint, leather, tile, glass and natural rubber,
method is simple and easy to operate,which has been widely used in various industry's testing laboratory.
Abrasion tests, the material is standard wheel friction after a certain number of turns,
evaluate its abrasion resistance material weightlessness rate by calculation.
Abrasion wheel after pre grinding standard method, test results can reach very high consistency.
Core advantages
Simple operation, display real-time speed, the speed control can be achieved 30-75rpm adjustment,
wearing can be preset number of turns.Arm can match with balance weights, accurate weight balance abrasion arm,
to realize the ASTM standard which requires 125 g pressure requirements
Vacuuming mouth height is adjustable, and adapt to different thickness materials, efficient removal of debris, improve test accuracy
Brand motor, mute, low noise, smooth operation
Applicable Standards
ISO 9352, ISO 5470, ISO 7784, ASTM D1044, ASTM D3884, ASTM D4060, GB/T 5137.1, QB/T 2726, DIN 53109
Features:
Operation panel with LCDscreen, display real-time speed with speed button, 30-75rpm speed adjustable.The number of wear cycles can be preset, setting range 1-999999 times.
The rear arm can precisely balance the weight of the worn arm with balance weights to meet the 125 g pressure according to the ASTM standard, as well as other standards and special pressure requirements.
Vacuum pump suction height is adjustable to meet material testing in different thickness. Besides, it can be efficiently eliminate debris to improve test accuracy.
Specifications
| spinning speed |
adjustable within the range of 30-75r/min (digital) |
| The sample surface diameter |
100mm |
| Sample table diameter |
113mm |
| setting range of Number of turns |
1-999999 |
| Air pressure |
250g |
| Weight (based on purchase) |
Counterweight、250g、500g、750g、1000g |
| Wheel pressure range |
125g、250g、500g、750g、1000g、1250g |
| Vacuum arm height |
Adjustable |
| power |
220V，50Hz |
| Size |
220mm×380mm×300mm |
| weight |
20kg |
| Basic configuration |
| G270 |
Taber Abrasion Resistance Tester |
|
（250g、500g、1000g）
Weight × 1 set (250g, 500g, 1000g each one pairs) |
| Optional Accessories |
|
| 27001 |
1 pair of 125g Balance weights and fixed screw |
| 27002-1 |
1 pair of Import original abrasion wheel CS-10×1 |
| 27002-2 |
1 pair of Import original abrasion wheel H-18×1 |
| 27003 |
Import the original decoration sandpaper (grinding disc) S - 11 x 1 package (100 pieces/package) |
| 27004 |
Import original sample sticker S - 36 (50 / package) |
| 27005 |
Diamond wheel polisher (friction wheel polishing Taber) |
| XC001 |
One set of the vacuum cleaner |
Other supplier products
|
|
Fluorescent UV Test Chamber |
This product uses fluorescent UV lamps, combined with temperature and humidity device to simulate the material decline in color, brightness, streng... |
|
|
Perspiration Tester Kit |
Perspiration tester consists of 1 stainless steel frame with 21 acrylic separator plates to hold 20 samples. Thus the bothISO/A... |
|
|
Small High Efficiency Air Filter |
The small high efficiency air filter test device is a highly targeted filter test equipment, based on the "European standard EN1822-5: 2000 deter... |
|
|
Flexible carpet thickness tester |
Flexible carpet thickness testerStandard:ISO1765:1986，ISO1766:1999(BS)，BS4051:1987(1996)，BS4098:1975(1996)，BS5808:1991(1996)，WoolsofNewZealandtestm... |
|
|
ASTM D3939 ICI Mace Snag Tester for snagging performance test |
The ICI Mace Snag Tester is equipped with an observation box and the comparison pattern card with different fabric structure. It is equipped with f... |
供应产品
Same products
