Taber abrasion resistance test machine
Range of application
TABER abrasion resistance tester and wear resistance tester can be replaced by wheel and weight,
which apply to the abrasion resistance performance test on fabric, cardboard, paint, leather, tile, glass and natural rubber,
method is simple and easy to operate,which has been widely used in various industry's testing laboratory.
Abrasion tests, the material is standard wheel friction after a certain number of turns,
evaluate its abrasion resistance material weightlessness rate by calculation.
Abrasion wheel after pre grinding standard method, test results can reach very high consistency.
Core advantages
Simple operation, display real-time speed, the speed control can be achieved 30-75rpm adjustment,
wearing can be preset number of turns.Arm can match with balance weights, accurate weight balance abrasion arm,
to realize the ASTM standard which requires 125 g pressure requirements
Vacuuming mouth height is adjustable, and adapt to different thickness materials, efficient removal of debris, improve test accuracy
Brand motor, mute, low noise, smooth operation
Applicable Standards
ISO 9352, ISO 5470, ISO 7784, ASTM D1044, ASTM D3884, ASTM D4060, GB/T 5137.1, QB/T 2726, DIN 53109
Features:
Operation panel with LCDscreen, display real-time speed with speed button, 30-75rpm speed adjustable.The number of wear cycles can be preset, setting range 1-999999 times.
The rear arm can precisely balance the weight of the worn arm with balance weights to meet the 125 g pressure according to the ASTM standard, as well as other standards and special pressure requirements.
Vacuum pump suction height is adjustable to meet material testing in different thickness. Besides, it can be efficiently eliminate debris to improve test accuracy.
Specifications
| spinning speed |
adjustable within the range of 30-75r/min (digital) |
| The sample surface diameter |
100mm |
| Sample table diameter |
113mm |
| setting range of Number of turns |
1-999999 |
| Air pressure |
250g |
| Weight (based on purchase) |
Counterweight、250g、500g、750g、1000g |
| Wheel pressure range |
125g、250g、500g、750g、1000g、1250g |
| Vacuum arm height |
Adjustable |
| power |
220V，50Hz |
| Size |
220mm×380mm×300mm |
| weight |
20kg |
| Basic configuration |
| G270 |
Taber Abrasion Resistance Tester |
|
（250g、500g、1000g）
Weight × 1 set (250g, 500g, 1000g each one pairs) |
| Optional Accessories |
|
| 27001 |
1 pair of 125g Balance weights and fixed screw |
| 27002-1 |
1 pair of Import original abrasion wheel CS-10×1 |
| 27002-2 |
1 pair of Import original abrasion wheel H-18×1 |
| 27003 |
Import the original decoration sandpaper (grinding disc) S - 11 x 1 package (100 pieces/package) |
| 27004 |
Import original sample sticker S - 36 (50 / package) |
| 27005 |
Diamond wheel polisher (friction wheel polishing Taber) |
| XC001 |
One set of the vacuum cleaner |
Other supplier products
|
|
Flammability Tester for Construction Materials |
Flammability Tester for Construction Materials is used to detect a variety of building materials and combustion performance measurement and control... |
|
|
Medical Face Mask Synthetic Blood Penetration Resistance Tester |
Medical masks synthetic blood penetration tester is used to determine the resistance of medical protective masks to penetration by synthetic blood ... |
|
|
digital fabric elmendorf tearing strength tester |
Standards: ASTM D1424/D689, NEXT 17, M&S P29, BE EN ISO 13937/4674, BS 4468, DIN EN 21974, GB/T 3917.1, ISO 1974 Applications: Digital Elmendo... |
|
|
fabric horizontal burning tester |
Standards:
ISO 3795, FMVSS 302, DIN 75200, SAE J369, ASTM D5132, JIS D1201, AU 169
Applications:
The Horizontal Flammability Testeris designed... |
|
|
AATCC 195 Moisture Management Tester |
Testing Standards: AATCC 195, SN 1689.1, GB/T 21655.2 Moisture management tester is the tool for the measurement, evaluation and classification of... |
All supplier products
Same products
