Alternate salt corrosion spray test chamber

Alternate salt corrosion spray test chamber

Salt Corrosion Spray Test Chamber

Salt Spray Test Chamber

Configured for your specific tests

Alternate salt corrosion spray test chamber adds below functions from traditional salt corrosion spray test chamber:Programmable controllers,accelerated test for copper and acid test.,etc.It complies with Standardof ASTM、DIN、IEC、GJB.Grande makes rain and spray testing easier by offering a standard chamber capable of published and OEM proprietary test methods.

The standardized design can be configured for the rain/spray tests you need, eliminating the guesswork in buying a chamber. The system is based on thespecification requirements, and can also accomplish individual automaker’s tests, as well as electrical-enclosure tests.

Our Design

Grande's modular design allows you to add on additional features, depending on the number and type of tests required. One possible choice is to integrate the spray system with a regular temperature and humidity chamber to save money and floor space, while also creating an opportunity to simulate actual operating conditions your product may experience.

Our system uses multiple control solenoids to vary the water's spray volume/pressure. A holding tank prepares the water to the desired temperature, if required. A pump ensures the water is delivered in the proper pressure range. The water is fed to a motorized manifold that rotates the spray arms. Each spray arm has an adjustable valve to allow finer control of the spray.

Testing capabilities

Thespecificationis modeled after and doesn’t differ greatly. Details about the nozzle types and the rotating nature of the spray arms and product table are also included in the requirements. Additionally, drip and car wash tests are also specified.

Heavy splash/shower

S1 Spray room temperature water with 40 nozzles at 14.2 psi (1 kgf/cm2) for 30 minutes. The flow rate of the water shall be 6.5 gallons/min. (24.5 L/m).

S2 Spray room temperature water with 40 nozzles at 42.7 psi (3 kgf/cm2) for 60 minutes. The flow rate of the water shall be 10.3 gallons/min. (39.2 L/m).

Light spray/rain

R1 Spray room temperature water with two nozzles at 4.3 psi (0.3 kgf/cm2) for 10 minutes. The flow rate of the water shall be 0.8 gallons/min. (3.2 L/m).

R2 Spray room temperature water with two nozzles at 1.4 psi (0.1 kgf/cm2) for 10 minutes. The flow rate of the water shall be 0.5 gallons/min. (1.9 L/m).

Examples of OEM automotive manufacturers' requirements

Heat the sample to a temperature above boiling, then spray with cold water for about two minutes. Repeat cycle.

Heat the sample to boiling temperature, then spray with room temperature water for about fifteen minutes. Repeat cycle.

Simulate a car wash by using high pressure spray.

Features

Rotating rain and spray nozzles designed to JIS specifications

Speed control for the rotating spray nozzles

Stationary product shelf - A rotating shelf is optional: see options

Water pressure regulators, gauges and flow meters

Special high-volume floor drain system to rapidly drain water out of the chamber

Interior chamber size is the smallest possible area using the JIS specified nozzles

Applicable Test Methods

JSA JIS (Japanese Industrial Standard) D 0203 "Method of Moisture, Rain and Spray Test for Automobile Parts"

SAE (Society of Automotive Engineers) J2245 "Recommended Practice for Splash and Spray Evaluation"

SAE J575 "Test Methods and Equipment for Lighting Devices and Components"

"The cabinet shall be equipped with a nozzle(s) which provides a solid cone water spray of sufficient angle to completely cover the sample device. The centerline of the nozzle(s) shall be directed downward at an angle of 45 degrees to the vertical axis of a rotating test platform... The device shall be rotated about its vertical axis at a rate of 4.0 ± 0.5 rpm... The water spray test shall continue for 12 hours." ref: SAE J575.

Optional/additional test capabilities:

Temperature/humidity controlled rain chamber: Includes -20 to 150°C and 20 to 98%RH capabilities

Water recirculation: Allows re-use of the treated rain water

Water conditioning: Allows the water to be cooled (5 to 20°C) prior to spray

High pressure spray: Adds capability to meet car wash test requirement

Drip nozzle: Adds capability to meet drip test requirement

Rotating table: Rotates the sample for full exposure to spray

Complied Standards：GB10485-89 GB4208-93 GB/T4942 andcorresponding IEC ISO & ASTM standards

Technical parameters:

Model No		GSMT-108		GSMT-270		GSMT-600		GSMT-1080
Working room(L)		108		270		600		1080
Inner chamber size(mm)W*H*D		600*400*450		900*600*500		1200*1000*500		900*2000*600
Exteriorchamber size(mm)W*H*D		1070*580*1030		1380*800*1150		1700*1210*950		1250*2800*1600
Packaging volume(CBM)								5
		200		220		250		350
Temperature range	Inside Chamber	RT+5℃～55℃，±0.5℃
	Air	Room temp.~50°C,±0.5℃
	Salt water	Room temp.~50°C,±0.5°C
Saturated Air Pressure(Kg/m)
Spray Volume(m/80cm/hr)
PH	Salt
	Copper acetate
System	Salt Spray Veicle	Air+acid(base)liquid,spraying tower device and non crystal nozzle(Fog particles finer and distributed evenly)
	Heating	SUS#304 & #316 stainless steel heater+taflon
	Controller	Touch-screen display controller,Hydrometer,salinomerer,fog collector,glassbar
Other Components		Imported LED digital display PID + SSR microcomputer integrated controller
Safety protection device		Overheating prevention circult-breaker,dehydration and overheating prevention mechanism,breakdown indicator light
Power supply		AC 1Ψ 220V 60/50Hz
							5
Customized service		Welcome to Non-standard,Specail requirements,OEM/ODM orders.
The technical information will be subjected to change without notice

Other supplier products

	3-layers temp humi test chamber	3-layers temp humi test chamber Programmable Temperature And Humidity Test Chamber Temperature Humidity Test Chamber It is applied to test the m...
	High altitude low pressure simulation test chamber	High altitude low pressure simulation test chamber Altitude Chamber For Sale Altitude Test Chambers Temperature testing at altitudes up to 100,0...
	Programmable Temperature and Humidity Test Chambers	Programmable Temperature and Humidity Test Chambers 3-Layers Temp Humi Test Chamber Temperature Humidity Test Chamber Temperature and Humidity T...
	Liquid Thermal shock test chamber	Liquid Thermal shock test chamber Three Zone Thermal Shock Test Chamber Thermal Shock Test Chamber Liquid Thermal Shock Test Chamber,Cold and ho...
	Temperature Cycling Test Chambers	Temperature Cycling Test Chambers Fast change rates test chamber Temperature Cycle Test Chamber Fast change rates testing chamber is suitable fo...

供应产品

Same products

	PH-2398 pH/EC/ORP/温度 多参数测试仪	卖方: 科立龙电子股份有限公司	大显示，可同时进行水质PH、氧化还原电位、电导率、温度的测量； 带背光LCD显示清晰，功能齐全，精度高； 仪表采用微电脑测量与控制技术，具有自动校准功能，方便实用。 内置蓝牙，可以与电脑或...
	ORP-2026S 防水型 土壤ORP&温度 二合一测试仪	卖方: 科立龙电子股份有限公司	范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV...
	防水型 EC /TDS/温度三合一参数测试仪	卖方: 科立龙电子股份有限公司	范围 EC ～19.9mS TDS Temp 0～50℃ 分辨率 ...
	EC-98330 电导率营养测试棒	卖方: 科立龙电子股份有限公司	本营养测试仪适用于水培和农业应用，能够准确测量水中的营养液电导率（EC）单位为mS/cm，以及总溶解固体（TDS）转换为百万分之一（ppm）。 适合需要较高EC值的植物，该测试仪具有高达6.0...
	PH-808防水笔式土壤PH计	卖方: 科立龙电子股份有限公司	两点按键校准,自动识别pH标准缓冲液 自动温度补偿确保全量程范围的精确测量。 自动电源关闭，有效节省电池能耗。 可替换型电极降低仪表维护与使用成 全防水性能保障在恶劣环境中对仪表的完整保...