Single Fiber Strength Tester
The single fibers are stretched to break on a constant elongation extensometer (CRE) under specified conditions. The values of tensile strength, elongation at break, elongation strength, and initial modulus of the specimen obtained from the load-elongation curve or the data display acquisition system are suitable for the tensile test of chemical fiber and natural fiber Stretch performance test.
Standards
GB/T21120 Synthetic fibers for cement, cement mortar and concrete
GB/T14337 Testing method for tensile properties of man-made staple fibers
ISO 5079 Textiles - Fibres - Determination of breaking force and elongation at break of individual fibres
GB/T13835.5 Test method for rabbit hair—Part 5:Breaking tenacity and elongation at break of single fibre
ASTM D3822(M) Standard test method for tensile properties of single textile fibers
JIS L1015 Testing methods for man-made staple fibres
ASTM D1294/2524/3106/3217/1445 Method of test for breaking tenacity of wool fiber bundles
DIN53843-2 Testing of textiles– Loop tensile test for staple fibres
ISO3060 Textiles -- Cotton fibres -- Determination of breaking tenacity of flat bundles
BS5116、BS 4029 Hexagon socket screws and wrench keys: metric series —Part 5: Specification for hexagon socket set screws with cup point
Technical Parameters
| Items | Standard requirements |
Design requirements |
Implementation methods |
| Load range | According to the maximum load requirements of the specimen |
0-100cN | Outsourcing, pressure sensor |
| Load error | ±1% | ≤±1% | Sensor validity |
| Load resolution | 0.1cN | 0.1cN | Sensor accuracy |
| Elongation range | 100mm | 100mm | Outsourcing, displacement sensor |
| Elongation error | 0.05,0.1mm | ≤0.01 | Sensor validity |
| Elongation resolution | 0.1% | 1% | Sensor accuracy |
| Clamp distance | 2-20mm | 1-20mm | Machining |
| Lower gripper descent speed | 5-20mm/min | 1-100mm/min | Outsourcing, stepper motor |
| Lower gripperstroke | 100mm | 100mm | Machining |
Accessories
The device can indicate or record the load applied to the specimen and the corresponding elongation value; (Force sensor)
The device can make load-elongation curve; (Integrated software)
The gripper suitably holds a single fiber at the desired nominal gauge length; (Manual, pneumatic and electric. The pneumatic gripper avoids the influence of the measurement of the force sensor and also reduces the degree of damage to the special brittle material during the clamping process.)
The device has a different stretching speed; (Stepper motor)
The device is used to wet the fibers in a wet state experiment so that the fibers are immersed during the test without affecting the test results; (Containers)
The device is used to precisely calibrate the instrument.
在线联系供应商
Other supplier products
 |
coatings hardness test machine scratch tester apparatus | With the Shear / Scratch Tester, you can evaluate resistance to shearing, scratching, gouging, marring, scraping and engraving on a variety of flat... |
 |
Medical Face Mask Air Exchange Pressure Difference Tester | The Medical Face Mask Air Exchange Pressure Difference Tester is used for the determination of gas exchange pressure difference of medical surgical... |
 |
Slip Resistance Tester | Slips and trips are the most common cause of major injuries at work and can happen almost anywhere-broken bones and other serious injuries frequent... |
 |
Bally Type Flexometer | Bally Type Flexometer 6-12-24 Working Places Standards: EN ISO 20344:6.6, I.U.P.10+20, I.U.P.20, UNI 4818, DIN 53.351, UNE/I.U.P.20 Applications： ... |
 |
Leather Air Permeability Tester | IntroductionA certain area of leather or textile samples is exerted a certain pressure on the air. The permeability is different, through t... |
Same products
 |
MECHANIC MEC 4K 2K 高清电子目镜相机，适用于立体显微镜 | 卖方: 深圳市维客修科技有限公司 | 描述 美卡尼克MEC 2K/2K PRO/4K高清电子目镜摄像机，可以将双目立体显微镜改装成三目显微镜。采用SONY 1/2.3"进口CMOS传感器，采用优质CMOS传感器，硬... |
 |
Fluke 15B+ 17B+ 18B+ 数字万用表电压频率测试仪 | 卖方: 深圳市维客修科技有限公司 | iFixes 10CC半透明/全透明/乳白色/浅无铅助焊膏适用于手机主板CPU BGA维修。iFixes助焊剂注射器注射焊膏焊接膏手机整理焊接耗材系列，适用于电路板纳米芯片，手机PCB， SMT... |
 |
HTT-02 Hot Tack Tester | 卖方: Cell Instruments Co., Ltd | The HTT-02 Hot Tack Testeris specifically designed to assess this property by measuring the stren... |
 |
SPC-01 Stretch Film Peeling Cling Tester | 卖方: Cell Instruments Co., Ltd | The SPC-01 Stretch Film Peeling Cling Testermeasures the adhesion between two layers of stretch f... |
 |
FTT-01 Film Thickness Tester | 卖方: Cell Instruments Co., Ltd | The FTT-01 FilmThickness Testerutilizes a mechanical scanning technique to measure the thickness ... |
