Single Fiber Strength Tester
The single fibers are stretched to break on a constant elongation extensometer (CRE) under specified conditions. The values of tensile strength, elongation at break, elongation strength, and initial modulus of the specimen obtained from the load-elongation curve or the data display acquisition system are suitable for the tensile test of chemical fiber and natural fiber Stretch performance test.
Standards
GB/T21120 Synthetic fibers for cement, cement mortar and concrete
GB/T14337 Testing method for tensile properties of man-made staple fibers
ISO 5079 Textiles - Fibres - Determination of breaking force and elongation at break of individual fibres
GB/T13835.5 Test method for rabbit hair—Part 5:Breaking tenacity and elongation at break of single fibre
ASTM D3822(M) Standard test method for tensile properties of single textile fibers
JIS L1015 Testing methods for man-made staple fibres
ASTM D1294/2524/3106/3217/1445 Method of test for breaking tenacity of wool fiber bundles
DIN53843-2 Testing of textiles– Loop tensile test for staple fibres
ISO3060 Textiles -- Cotton fibres -- Determination of breaking tenacity of flat bundles
BS5116、BS 4029 Hexagon socket screws and wrench keys: metric series —Part 5: Specification for hexagon socket set screws with cup point
Technical Parameters
| Items | Standard requirements |
Design requirements |
Implementation methods |
| Load range | According to the maximum load requirements of the specimen |
0-100cN | Outsourcing, pressure sensor |
| Load error | ±1% | ≤±1% | Sensor validity |
| Load resolution | 0.1cN | 0.1cN | Sensor accuracy |
| Elongation range | 100mm | 100mm | Outsourcing, displacement sensor |
| Elongation error | 0.05,0.1mm | ≤0.01 | Sensor validity |
| Elongation resolution | 0.1% | 1% | Sensor accuracy |
| Clamp distance | 2-20mm | 1-20mm | Machining |
| Lower gripper descent speed | 5-20mm/min | 1-100mm/min | Outsourcing, stepper motor |
| Lower gripperstroke | 100mm | 100mm | Machining |
Accessories
The device can indicate or record the load applied to the specimen and the corresponding elongation value; (Force sensor)
The device can make load-elongation curve; (Integrated software)
The gripper suitably holds a single fiber at the desired nominal gauge length; (Manual, pneumatic and electric. The pneumatic gripper avoids the influence of the measurement of the force sensor and also reduces the degree of damage to the special brittle material during the clamping process.)
The device has a different stretching speed; (Stepper motor)
The device is used to wet the fibers in a wet state experiment so that the fibers are immersed during the test without affecting the test results; (Containers)
The device is used to precisely calibrate the instrument.
Send product request
Other supplier products
 |
wet penetration textile test instrument | The Wet microbial penetration resistance tester is used to determine the performance of the material in the resistance to the penetration of bacter... |
 |
Thermal Contact Tester | The instrument is designed for the assessment of materials and material combinations that are exposed to a heat radiation source.In procedure A exp... |
 |
Geotextile Vertical Water Permeability Tester | Introduction Geo-synthetics vertical water penetration instrument is used to determine the geotextile and its related products in the constant h... |
 |
Medical Face Mask Synthetic Blood Penetration Resistance Test equipment | Medical masks synthetic blood penetration tester is used to determine the resistance of medical protective masks to penetration by synthetic blood ... |
 |
vehicle windscreen fogging tester with SAE J1756 | Fogging tester is professionally designed for the fogging characteristics evaluation of volatile constituents of decorating materials used in cars ... |
Same products
 |
MECHANIC ROBOT 6560T-B11HD Trinocular Stereo Microscope | Seller: ShenZhen VIP FIXPHONE Technology Co., Ltd, | Description Mechanic ROBOT Standard Edition 6560T-B11 Trinocular Stereo Microscope with ... |
 |
ZM-6552TH 0.65X - 5.2X Binocular Trinocular Stereo Microscope for Motherboard Repair | Seller: ShenZhen VIP FIXPHONE Technology Co., Ltd, | Description Greenough ZM-6552TH 0.65X-5.2X Binocular/Trinocular Stereo Zoom Microscope f... |
 |
MEGA-IDEA iSocket For Testing of iPhone 16-16 Pro Max Motherboards Layering Repairs | Seller: Phonefix | MEGA-IDEA iSocket for functional testing of iPhone 16/16 Plus/16 Pro/16 Pro Max motherboards duri... |
 |
Vibration Fiber Fineness Tester | Seller: Standard International Group (HK) Limited | The vibration fiber fineness tester works based on the stringprinciple. First, it measures the na... |
 |
Fiber Length Analyzer | Seller: Standard International Group (HK) Limited | The instrument uses a roller type fiber length analyzer, which will be arranged in a row of cotto... |
