Rain Tester and test machine

Testing Standards:AATCC 35, BS EN ISO 22958
Applications:
Rain Tester is designed for determining the water-repellent property of fabrics or composite materialsunder different rainfall pressure.
Product Information:
This instrument can simulate rain horizontally spraying to the tested sample which is vertically fixed in the stainless steel tank. The back of the specimen is adhered to the standard suction filter paper (weighing before and after the test). The water in the water column is sprayed into the rain by the standard nozzle, while the water column can be changed from 600mm(24 inches) to 2400mm(96 inches) by 300mm inciments (12 inches).
Applications:
Rain Tester is designed for determining the water-repellent property of fabrics or composite materialsunder different rainfall pressure.
Product Information:
This instrument can simulate rain horizontally spraying to the tested sample which is vertically fixed in the stainless steel tank. The back of the specimen is adhered to the standard suction filter paper (weighing before and after the test). The water in the water column is sprayed into the rain by the standard nozzle, while the water column can be changed from 600mm(24 inches) to 2400mm(96 inches) by 300mm inciments (12 inches).
The rainproof tester provides an LCD color touch screen with an interactive user interface, which can preset the ISO and AATCC test standards, water temperature, water column height and test time. The built-in cistern can recycle the water that is sprayed on the sample, with a heater that controls the water temperature. The precision water pump can automatically maintain the water column in the nozzle to the set the height.
The tester cannot be refitted, but can be ordered with new rain tester. We can provide a temperature-controlled water supply system that includes an electronic temperature controller, a mixing tank, and a solenoid control valve.
Techncial Parameters:
1. Control: LCD color touch panel;
Techncial Parameters:
1. Control: LCD color touch panel;
2. Water column: 60 ~ 150cm + 1.5cm (standard), 60 ~ 240cm + 1.5cm (extension);
3. Sample rack: 285 by 190mm (305mm from the nozzle);
4. Heater: 1000W;
5. Temperature control: room temperature 40 ℃ ~ + / - 0.8 ℃ (no cooling device);
6. Supply of water: tap water or distilled water;
7. Reservoir: 40L;
8. Dimensions: 700 x 600 * 2460mm (long x width x height);
9. Weight: 125kg(275lb);
10. Power supply: 23/120vac, 50/60hz.
Configuration:
1. Anti-rain testing instrument with LCD color touch screen control panel;
Configuration:
1. Anti-rain testing instrument with LCD color touch screen control panel;
2. Water column pipe, 240cm;
3. Standard sprinkler nozzle;
4. Sample rack andchassis;
5. 40L reservoir;
6. 150cm water column tube (optional);
7. AATCC filter paper 500 x 1000mm(25 pieces) (optional).
在线联系供应商
Other supplier products
| Snap Button Tester | Snap Button Tester Testing Standards: ASTM D7142-2/F963, CFR 1500, EN 71 PART 1, GB 6675, ISO 8124, M&S P115A Applications: Snap Tester is used... | |
| Leather Permeability Tester | IntroductionAir permeability tester makes the test more economic, and the test results meet the requirement of international standards and retailer... | |
| spray water repellency tester | Water Repellency Tester is used to check the water repellency of the fabric by spray test in textile testing laboratory. Suitable for Table cloth, ... | |
| Mask Respirator Breathing Resistance Tester | Mask respiratory resistance tester is used to measure the respiratory resistance and expiratory resistance of respirators and masks under the speci... | |
| Stone hammer blow testing instrument | Stone hammer blow testing instrument mainly simulates the actual driving condition of the vehicle, and the individual parts of the vehicle body are... |
Same products
| Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... | |
| Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... | |
| Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... | |
| Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... | |
| Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |















