Perspiration Tester Kit
Perspiration tester consists of 1 stainless steel frame with 21 acrylic separator plates to hold 20 samples. Thus the bothISO/AATCC test methods can be done in one time. 20 plastic basins are equipped for pre-treatment of samples.
Testing Standards:
ISO 105 E01/E02/E04, BS 1006, AATCC 15/106/107, DIN 54005, M&S C6/C7, NEXT TM4, DIN EN ISO 105 E01/E02/E04, GB/T 3992/5713/5714
Applications:
The Perspiration Tester is designed for color fastness test ofvarious kinds of textile materials and textilesto perspiration, sea water, saliva, distilled water,etc.
Product Information:
The Perspiration Tester is widely used in determining the color fastness of textiles to perspiration, sea water, saliva and distilled water. The colored textile specimen combinedtogether with the prescribed lining fabricis wet out in a simulated acid perspiration solution or others.After the wetting processed, the specimen combination is extruded to remove the excess fluid and sandwiched between the sample board, applied with specified pressure for a certain period of time. Then dry the specimen and the lining fabric seperately and observe the color change.
The stainless steel frame can hold 20 samples held between acrylic separator plates.Loading weights for AATCC, ISO and BS standards are included.UseIt is equipped with a sweat color fastness oven and a chemical reagent kit for AATCC and ISO perspiration test,including 500g Sodium Chloride, 500g Sodium Dihydrogen Orthophosphate 2H2O, 500g Di-Sodium Hydrogen Orthophosphate 2H2O, 200g L-Histidine Monohydrochloride.
The stainless steel frame can hold 20 samples held between acrylic separator plates.Loading weights for AATCC, ISO and BS standards are included.UseIt is equipped with a sweat color fastness oven and a chemical reagent kit for AATCC and ISO perspiration test,including 500g Sodium Chloride, 500g Sodium Dihydrogen Orthophosphate 2H2O, 500g Di-Sodium Hydrogen Orthophosphate 2H2O, 200g L-Histidine Monohydrochloride.
Technical Parameters:
A.Provided with a stainless steel frame, 2 loading weights and 21 acrylic separator plates.
B.The stainless steel frame with a capacity of 20 samples of 10cm×4 cm.
C.Each sample held between acrylic separator plates.
D.Different weights for different test standards and avoid misuse.
Accessories and Consumables:
1.Standard weights
2.Acrylic Plates
3.Sodium Chloride
4.Sodium hydroxide
4.Sodium hydroxide
5.Sodium Dihydrogen Orthophosphate·2H2O
6.Di-Sodium Hydrogen Orthophosphate·2H2O
7.Lactic Acid (USP 85)
8.Sodium Hydroxide
9.L-Histidine Monohydrochloride
在线联系供应商
Other supplier products
 |
Tearing Strength test instrument | IntroductionLiftthependulumuptoacertainheighttogiveitaninitialpotentialenergy.Thependulumtearsthespecimenwhileswingingdown.Theelectronictestsystemc... |
 |
Building material burning performance tester | According to GB / T8626, ISO11925 development, suitable for the absence of external radiation conditions, with a small flame directly impact the ve... |
 |
Radiant Protective Performance Test Device | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ... |
 |
fabric surface wetting resistance tester | Water Repellency Tester is used to check the water repellency of the fabric by spray test in textile testing laboratory. Suitable for Table cloth, ... |
 |
Low Temperature Chrysler Fold Tester | Cold Fold Tester ---Chrysler Standards:LP-463-KB-28-01 Method A Applications: This Cold Fold Tester is applied to the cold fold test based on Chrys... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
