Perspiration Tester is to determine colour fastness test to water, sea water, perspiration fastness in textiles and sublimation during storage. Perspiration tester consists of 1 stainless steel frame
Perspiration Tester is to determine colour fastness test to water, sea water, perspiration fastness in textiles and sublimation during storage. Perspiration tester consists of 1 stainless steel frame with 21 acrylic separator plates to hold 20 samples. Thus the both ISO/AATCC test methods can be done in one time. 20 plastic basins are equipped for pre-treatment of samples.
Testing Standards:
ISO 105 E01/E02/E04, BS 1006, AATCC 15/106/107, DIN 54005, M&S C6/C7, NEXT TM4, DIN EN ISO 105 E01/E02/E04, GB/T 3992/5713/5714
Applications:
The Perspiration Tester is designed for color fastness test of various kinds of textile materials and textiles to perspiration, sea water, saliva, distilled water,etc.
Product Information:
The Perspiration Tester is widely used in determining the color fastness of textiles to perspiration, sea water, saliva and distilled water. The colored textile specimen combined together with the prescribed lining fabric is wet out in a simulated acid perspiration solution or others.After the wetting processed, the specimen combination is extruded to remove the excess fluid and sandwiched between the sample board, applied with specified pressure for a certain period of time. Then dry the specimen and the lining fabric seperately and observe the color change.
The stainless steel frame can hold 20 samples held between acrylic separator plates.Loading weights for AATCC, ISO and BS standards are included.Use It is equipped with a sweat color fastness oven and a chemical reagent kit for AATCC and ISO perspiration test, including 500g Sodium Chloride, 500g Sodium Dihydrogen Orthophosphate 2H2O, 500g Di-Sodium Hydrogen Orthophosphate 2H2O, 200g L-Histidine Monohydrochloride.
Technical Parameters:
A.Provided with a stainless steel frame, 2 loading weights and 21 acrylic separator plates.
B.The stainless steel frame with a capacity of 20 samples of 10cm×4 cm.
C.Each sample held between acrylic separator plates.
D.Different weights for different test standards and avoid misuse.
Accessories and Consumables:
1.Standard weights
2.Acrylic Plates
3.Sodium Chloride
4.Sodium hydroxide
5.Sodium Dihydrogen Orthophosphate·2H2O
6.Di-Sodium Hydrogen Orthophosphate·2H2O
7.Lactic Acid (USP 85)
8.Sodium Hydroxide
9.L-Histidine Monohydrochloride
Other supplier products
|
|
Fabric Thickness Gauge |
Fabric Thickness Gauge
Testing Standards:
JIS L1096/L1018, GB/T 3820, ISO 5084
Applications:
Fabric Thickness Gaugeis an apparatus to measure t... |
|
|
Fabric Ultraviolet Tester |
The Tester is used to determine the UV transmittance and anti-ultraviolet performance of textiles. You can directly obtain the UV protection factor... |
|
|
Oscillator Abrasion Tester |
StandardASTM D4157：Standard Test Method for Wear Resistance of Textiles (Swing Roller Method)
Applications
Oscillator Abrasion Tester is also nam... |
|
|
Medical Face Mask Fire Resistance Tester |
This device is mainly used to test the flame retardant performance of medical masks. The combustion performance of the mask is measured through a h... |
|
|
Fabric Hand Feel Tester |
Brief Introduction：By softness value of the test material and objective evaluation of its feeling (touch) performance for softness test fabrics, te... |
供应产品
Same products
